Oracle® Fusion Middleware

Administrator's Guide for Oracle Identity Navigator

11g Release 2 (11.1.2.2)

E27135-05

December 2013

Oracle Identity Navigator is an administrative portal designed to act as a launch pad for Oracle Identity Management products. This book describes how to configure and use Oracle Identity Navigator.

Oracle Fusion Middleware Administrator's Guide for Oracle Identity Navigator 11g Release 2 (11.1.2.2)

E27135-05

Copyright © 2010, 2013, Oracle and/or its affiliates. All rights reserved.

Primary Author:  Trish Fuzesy

Contributor: Fannie Ho, Himanshu Sharma, Daniel Shih, Olaf Stullich

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

Contents

List of Figures

List of Tables

Preface

- Audience

- Documentation Accessibility

- Related Documents

- Conventions

1 Introduction to Oracle Identity Navigator

- 1.1 Relationships with Other Components

- 1.2 Single Sign-On Integration

- 1.3 Common Admin Roles

- 1.4 Administrative Role Types

- 1.5 Reports

- 1.5.1 Oracle Business Intelligence Publisher

- 1.5.2 My Reports

- 1.6 News and Announcements

- 1.7 System Requirements and Certification

2 Managing Oracle Identity Navigator

- 2.1 Configuring the Identity Store

- 2.2 Configuring the Enterprise Roles

- 2.3 Configuring Single Sign-On (SSO)

- 2.4 Configuring Secure Socket Layer (SSL)

- 2.5 Getting Started with Oracle Identity Navigator

- 2.5.1 Initial Configuration Tasks

- 2.5.2 Configuring Oracle Business Intelligence Publisher

- 2.5.2.1 Before You Create a Connection to BI Publisher

- 2.5.2.2 Creating a Connection to BI Publisher

- 2.5.3 Configuring a Proxy to Access News Feeds

- 2.5.4 Configuring Oracle Privileged Account Manager

- 2.6 Managing the Product Launcher

- 2.6.1 Adding a Component Link to the Product Launcher by Using Product Discovery

- 2.6.2 Adding a Link to the Product Launcher Without Product Discovery

- 2.6.3 Editing a Link

- 2.6.4 Removing a Link

- 2.6.5 Adding a Category

- 2.6.6 Editing a Category

- 2.6.7 Removing a Product Category

- 2.7 Managing Access Privileges

- 2.7.1 Searching for Users

- 2.7.2 Searching for Common Admin Roles

- 2.7.3 Assigning a Common Admin Role

- 2.8 Migrating Oracle Identity Navigator from Test to Production

- 2.9 Advanced: Configuring Component Administrative Role-Based Access

- 2.10 Troubleshooting

- 2.10.1 Cannot Access Oracle Identity Navigator in Browser

- 2.10.2 Report Problems

- 2.10.3 Cannot View the Common Admin Roles

3 Using the Oracle Identity Navigator Dashboard

- 3.1 Launching Oracle Identity Navigator

- 3.2 Logging in to Oracle Identity Navigator

- 3.3 Launching a Component Administrative Console

- 3.4 Managing Your Reports

- 3.4.1 Adding a New Report

- 3.4.2 Editing a Report

- 3.4.3 Cloning a Report

- 3.4.4 Removing a Report

- 3.4.5 Running a Report

- 3.5 Viewing Your Profile

- 3.6 Viewing Your Common Admin Roles

- 3.7 Reading News and Announcements

- 3.8 Personalizing Oracle Identity Navigator

- 3.8.1 Rearranging the Page Layout

Index

List of Figures

- 1-1 Relationships Between Oracle Identity Navigator and Other Components

List of Tables

- 1-1 Summary of the Common Admin Roles

- 1-2 Summary of Oracle Identity Navigator Common Admin Roles

- 2-1 Component Specific Administrative Roles

Preface

Oracle Identity Navigator is an administrative portal designed to act as a launch pad for Oracle Identity Management products. This book describes how to configure and use Oracle Identity Navigator.

Audience

This document is intended for Oracle Identity Navigator administrators and Oracle Identity Management component administrators.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

Related Documents

For more information, see the following documents in the Oracle Fusion Middleware 11g documentation set.

- Oracle Fusion Middleware Administrator's Guide for Oracle Business Intelligence Publisher

- Oracle Fusion Middleware Integration Guide for Oracle Identity Management Suite

- Oracle Fusion Middleware Administrator's Guide for Oracle Privileged Account Manager

- Oracle Fusion Middleware Application Security Guide

- Oracle Fusion Middleware Administrator's Guide for Oracle Internet Directory

- Oracle Fusion Middleware Administrator's Guide for Oracle Virtual Directory

- Oracle Fusion Middleware Administrator's Guide for Oracle Identity Manager

- Oracle Fusion Middleware Securing Oracle WebLogic Server

Conventions

The following text conventions are used in this document:

Convention

Meaning

boldface

Boldface type indicates graphical user interface elements associated with an action, or terms defined in text or the glossary.

italic

Italic type indicates book titles, emphasis, or placeholder variables for which you supply particular values.

monospace

Monospace type indicates commands within a paragraph, URLs, code in examples, text that appears on the screen, or text that you enter.

1 Introduction to Oracle Identity Navigator

Oracle Identity Navigator is an administrative portal designed to act as a single launch pad for accessing the administration consoles for other Oracle Identity Management components. It does not replace the individual component consoles. Rather, it allows you to access the Oracle Identity Management consoles centrally from one location. This chapter contains the following topics:

- Section 1.1, "Relationships with Other Components"

- Section 1.2, "Single Sign-On Integration"

- Section 1.3, "Common Admin Roles"

- Section 1.4, "Administrative Role Types"

- Section 1.5, "Reports"

- Section 1.6, "News and Announcements"

- Section 1.7, "System Requirements and Certification"

1.1 Relationships with Other Components

Oracle Identity Navigator is installed with other Oracle Identity Management components and centralizes access to product administration consoles, as well as other identity services. Oracle Identity Navigator can be installed with other Oracle Identity Management components in the same domain or in different domains. It is a web-based application that you access through a browser.

Starting with 11g Release 2 (11.1.2.2), Oracle Identity Navigator is deployed in a managed server after installation. The default server name is opam_server1. However, Oracle Privileged Account Manager will not be configured unless selected in the configuration wizard.

You can use Oracle Identity Navigator to access the following product administration consoles and identity services:

- Oracle Access Management Access Manager

- Oracle Adaptive Access Manager

- Oracle Authorization Policy Manager

- Oracle Directory Services Manager

- Oracle Directory Integration Platform

- Oracle Enterprise Manager

- Oracle Entitlements Server

- Oracle Identity Analytics

- Oracle Access Management Identity Federation

- Oracle Identity Manager

- Oracle Privileged Account Manager

- Oracle Role Manager

- Oracle WebLogic Server

- Oracle Web Services Manager

Figure 1-1 shows the following relationships between Oracle Identity Navigator and the Oracle Identity Management components:

- Each administration console launches in its own separate browser window. You configure Oracle Identity Navigator to connect to these consoles either by specifying the URLs directly, or by employing the product discovery feature.

- Like Oracle Enterprise Manager Fusion Middleware Control, Oracle Identity Navigator is a Java EE application deployed on an Oracle WebLogic Server. It uses Oracle Metadata Service.

- The Oracle Identity Navigator report feature relies on Oracle Business Intelligence Publisher and requires configuration to communicate with an Oracle Business Intelligence Publisher server.

- You can access Oracle RSS feeds and view them in the Dashboard. You might need to configure a proxy to connect through your company's firewall.

Figure 1-1 Relationships Between Oracle Identity Navigator and Other Components

1.2 Single Sign-On Integration

Oracle Identity Navigator is integrated with 11g Oracle Platform Security Services for single sign-on (SSO) support. Some of the component consoles accessible from Oracle Identity Navigator are single sign-on enabled and can be configured to authenticate against the same authentication service in the Oracle Identity Navigator operation environment. Single sign-on enabled consoles include Oracle Access Management, Oracle Identity Manager, Oracle Adaptive Access Manager, Oracle Authorization Policy Manager, and Oracle Privileged Account Manager. Double sign-on occurs for other components, such as Oracle Directory Services Manager and Oracle Enterprise Manager Fusion Middleware Control. For more information, see Section 2.3, "Configuring Single Sign-On (SSO)".

1.3 Common Admin Roles

Common Admin Roles are a set of predefined standardized application roles for securing administrative access to Oracle Identity Management applications. These roles encapsulate the common administrative tasks across the Oracle Identity Management Suite.

Note:

You must configure enterprise roles to support the Common Admin Roles before you can begin using them. For more information, see Section 2.2, "Configuring the Enterprise Roles".

Common Admin Roles can be assigned to users from the Oracle Identity Navigator Administration page. Each administrative role enables a corresponding set of rights that are common across the Identity Management Suite components.

Table 1-1 describes the responsibilities each role type supports and the skills and expertise required in order to perform typical duties associated with that role. You can assign any of the roles described in Table 1-1 to a user as a component role. Once a role assignment is made, the user is granted the corresponding administrative capabilities for that component.

Table 1-1 Summary of the Common Admin Roles

Common Admin Role Name

Responsibility

Skills and Expertise Required

Application Configurator

- Use Identity Management applications to support business requirements within an assigned business scope.

- Strong knowledge of product features.

- Good knowledge of business requirements.

Application Auditor

- Use Identity Management application to support business requirements within an assigned business scope.

- Strong knowledge of product features.

- Good knowledge of business requirements related to transactional pattern analysis.

Application Troubleshooter

- Use Identity Management application to support business-specific troubleshooting or investigation.

- Strong knowledge of analysis features.

Security Auditor

- Provide audit reports to upper management.

- Verify permissions and generate access reports.

- Verify proper configuration of Identity Management applications.

- Strong knowledge of access management processes.

- Strong knowledge of the risks associated with unauthorized access.

- Good understanding of information security and system architecture.

Security Admin

- Configure Identity Management application roles and approve role grants.

- Configure Identity Management applications to work with corporate infrastructure and applications.

- Maintain system credentials for identity stores, key stores, databases, and other repositories.

- Grant administrative roles and permissions.

- Strong knowledge of corporate infrastructure.

- Strong technical knowledge to troubleshooting infrastructure access rights.

- Strong knowledge of Identity Management security architecture.

User Manager

- Create, modify, and delete users and groups.

- Reset passwords and unlock accounts.

- Strong knowledge of corporate identity infrastructure.

Helpdesk Admin

- Reset passwords and unlock accounts.

- Troubleshoot access problems.

- Strong knowledge of corporate applications.

- Strong knowledge of troubleshooting infrastructure access rights.

1.4 Administrative Role Types

Actions that an authenticated user can perform are based on the roles assigned. Oracle Identity Navigator supports two types of administrative roles:

- Administrators with Common Admin Roles
Administrators with Common Admin Roles specific to Oracle Identity Navigator can administer Oracle Identity Navigator as summarized in Table 1-2.

- Component administrators
A component administrator manages a specific Identity Management component. These role types can be finer grained than the Common Admin Role. For more information, see Section 2.9, "Advanced: Configuring Component Administrative Role-Based Access".

Table 1-2 describes the Common Admin Roles that are specific to Oracle Identity Navigator and the access rights each conveys. All authenticated users can access My Profile and News and Announcements.

Table 1-2 Summary of Oracle Identity Navigator Common Admin Roles

Common Admin Role Name

Access Rights

Security Admin

- Access to all the product links in the Product Launcher.

- Access to the Access Privileges page for User/Role search and assignment.

Security Auditor

- Access to all the product links in the Product Launcher.

- Access to the My Reports page with full privileges for reports.

Application Configurator

- Access to all the product links in the Product Launcher.

- Access to BI Publisher, including configuration, report folder mapping, and assignment to product components.

- Access to Product Registration, including Discover Products and Product Links setup.

After installation, all users who are members of the Oracle WebLogic Server Administrators group are granted all superuser privileges required to administer Oracle Identity Navigator. The default administrator is the weblogic user (also known as the bootstrap user) who is a member of the Administrators group.

The weblogic user, as the bootstrap user, can be used to map the users from the domain identity store to the Oracle Identity Navigator Common Admin Roles detailed in Table 1-2. Users mapped to the Security Admin role can assign the Common Admin Roles to other users, and can later replace the weblogic user in your environment. After the initial user mapping is completed, replace the default weblogic user by mapping the Security Admin role to at least one administrator user defined in your domain identity store.

Note:

Administration roles specific to Oracle Privileged Account Manager are managed in Oracle Identity Navigator. For information about managing Oracle Privileged Account Manager roles, see Oracle Fusion Middleware Administrator's Guide for Oracle Privileged Account Manager.

1.5 Reports

Oracle Identity Navigator supports a set of default reports. These reports provide meaningful information to auditors for examining the security practices of the component as deployed, as well as enabling a check of the component health status.

1.5.1 Oracle Business Intelligence Publisher

All reports are generated using Oracle Business Intelligence Publisher. Oracle BI Publisher 11.1.1.5.0, or higher, must be installed separately. See Section 2.5.2, "Configuring Oracle Business Intelligence Publisher" for more information on installing and configuring Oracle BI Publisher.

1.5.2 My Reports

My Reports is a portlet used to view Oracle Identity Management BI Publisher Reports. In addition, the My Reports portlet allows you to save a report query so you can run the report again. Every administrative user has their own My Reports portlet in the Dashboard page. You can add report categories to My Reports and save different reports under different categories. Reports are categorized by the component name.

The following tasks can be performed in My Report:

- Show a list of Oracle Identity Management BI Publisher Reports in a portlet configuration page.

- Select, add configuration parameters to query the data, and add the report to My Reports list from a portlet configuration page.

- View and run any report that the you have access to.

For more information about using My Reports, see Section 3.4, "Managing Your Reports".

1.6 News and Announcements

Oracle Identity Navigator supports the following three Oracle RSS feeds:

- Identity Management Discussion Forum

- Oracle New Downloads

- Oracle Security Alerts

The RSS feeds can not be changed.

1.7 System Requirements and Certification

Refer to the system requirements and certification documentation for information about hardware and software requirements, platforms, databases, and other information. Both of these documents are available on Oracle Technology Network (OTN).

The system requirements document covers information such as hardware and software requirements, minimum disk space and memory requirements, and required system libraries, packages, or patches:

http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-requirements-100147.html

The certification document covers supported installation types, platforms, operating systems, databases, JDKs, and third-party products:

http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html

2 Managing Oracle Identity Navigator

This chapter describes the common configuration and management tasks an enterprise administrator can perform while using Oracle Identity Navigator. This chapter contains the following topics:

- Section 2.1, "Configuring the Identity Store"

- Section 2.2, "Configuring the Enterprise Roles"

- Section 2.3, "Configuring Single Sign-On (SSO)"

- Section 2.4, "Configuring Secure Socket Layer (SSL)"

- Section 2.5, "Getting Started with Oracle Identity Navigator"

- Section 2.6, "Managing the Product Launcher"

- Section 2.7, "Managing Access Privileges"

- Section 2.8, "Migrating Oracle Identity Navigator from Test to Production"

- Section 2.9, "Advanced: Configuring Component Administrative Role-Based Access"

- Section 2.10, "Troubleshooting"

2.1 Configuring the Identity Store

Note:

This section provides information about configuring the domain identity store using Oracle Internet Directory or Oracle Virtual Directory with a supported LDAP-based directory server. For information about other supported identity stores, see Section 1.7, "System Requirements and Certification".

Consult the vendor product documentation for information about configuring the identity store in your environment.

A domain identity store must be configured before you can view users when searching from the Access Privileges pane. To configure the identity store as the main authentication source, you must configure the Oracle WebLogic Server domain where Oracle Identity Navigator is installed. Configuration is done in the WebLogic Server Administration Console.

The Control Flag attribute for the authenticator provider must be set to determine the ordered execution of the Authentication providers. The possible values for the Control Flag attribute are:

- REQUIRED - This LoginModule must succeed. Even if it fails, authentication proceeds down the list of LoginModules for the configured Authentication providers. This setting is the default.

- REQUISITE - This LoginModule must succeed. If other Authentication providers are configured and this LoginModule succeeds, authentication proceeds down the list of LoginModules. Otherwise, control is returned to the application.

- SUFFICIENT - This LoginModule need not succeed. If it does succeed, return control to the application. If it fails and other Authentication providers are configured, authentication proceeds down the LoginModule list.

- OPTIONAL - This LoginModule can succeed or fail. However, if all Authentication providers configured in a security realm have the JAAS Control Flag set to OPTIONAL, the user must pass the authentication test of one of the configured providers.

For more information about creating a new default authenticator in Oracle WebLogic Server, see Oracle Fusion Middleware Oracle WebLogic Server Administration Console Online Help and Oracle Fusion Middleware Securing Oracle WebLogic Server.

To configure the OID authenticator in Oracle WebLogic Server:

1. Log in to Oracle WebLogic Server Administration Console, and click Lock & Edit in the Change Center.

2. In Oracle WebLogic Server Administration Console, select Security Realms from the left pane and click the realm you are configuring. For example, myrealm.

3. Select the Providers tab, then select the Authentication sub-tab.

4. Click New to launch the Create a New Authentication Provider page. Complete the fields as follows:

- Name: Enter a name for the authentication provider. For example, MyOIDDirectory.

- Type: Select OracleInternetDirectoryAuthenticator from the list.

- Click OK. The authentication providers table is updated.

5. In the authentication providers table, click the newly added authenticator.

6. In Settings, select the Configuration tab, then select the Common tab.

- Set the Control Flag to SUFFICIENT.

- Click Save.

7. Select the Provider Specific tab and enter the following required settings using values for your environment:

- Host: The host name of the Oracle Internet Directory server.

- Port: The port number on which the Oracle Internet Directory server is listening.

- Principal: The distinguished name (DN) of the Oracle Internet Directory user to be used to connect to the Oracle Internet Directory server. For example: cn=OIDUser,cn=users,dc=us,dc=mycompany,dc=com.

- Credential: Password for the Oracle Internet Directory user entered as the Principal.

- Group Base DN: The base distinguished name (DN) of the Oracle Internet Directory server tree that contains groups.

- User Base DN: The base distinguished name (DN) of the Oracle Internet Directory server tree that contains users.

- All Users Filter: LDAP search filter. Click More Info... for details.

- User From Name Filter: LDAP search filter. Click More Info... for details.

- User Name Attribute: The attribute that you want to use to authenticate (for example, cn, uid, or mail). For example, to authenticate using a user's email address you set this value to mail.

8. Click Save.

9. From the Settings for myrealm page, select the Providers tab, then select the Authentication tab.

10. Click Reorder.

11. Select the new authenticator and use the arrow buttons to move it into the first position in the list.

12. Click OK.

13. Click DefaultAuthenticator in the Authentication Providers table to display the Settings for DefaultAuthenticator page.

14. Select the Configuration tab, then the Common tab, and select SUFFICIENT from the Control Flag list.

15. In the Change Center, click Activate Changes.

16. Restart Oracle WebLogic Server.

To use Oracle Virtual Directory as the domain identity store, you must do the following:

- Configure Oracle Virtual Directory with the LDAP-based server. For more information, see "Creating LDAP Adaptors" in Oracle Fusion Middleware Administrator's Guide for Oracle Virtual Directory.

- Configure the OVD authenticator in Oracle WebLogic Server. For more information, see Oracle Fusion Middleware Oracle WebLogic Server Administration Console Online Help.

2.2 Configuring the Enterprise Roles

Enterprise roles must be created in the domain identity store to support the Common Admin Roles. Templates are provided for both Oracle Internet Directory and Oracle Virtual Directory configured with an LDAP-based directory server. The template is used with the ldifmigrator tool.

Pre-requisites to configuring enterprise roles for the Common Admin Roles:

1. The domain identity store must be configured. For more information, see Section 2.1, "Configuring the Identity Store".

2. The domain policy store must be configured. For more information, see Oracle Fusion Middleware Application Security Guide.

For more information about supported identity and policy store configurations for Oracle Identity Navigator, see Section 1.7, "System Requirements and Certification".

To configure enterprise roles in the domain identity store:

1. Select the template for your environment from ORACLE_HOME/common/templates.

- Oracle Internet Directory: use oinav_template_oid.ldif

- Oracle Virtual Directory: use oinav_template_ovd.ldif

2. To use the ldifmigrator tool, set $JAVA_HOME and include JAVA_HOME/bin in PATH.

3. Use the ldifmigrator tool to create the enterprise roles in the identity store under <GroupBase> as follows, where <ldif template> is the template name:

Run
java -cp $MIDDLEWARE_HOME/oracle_common/modules/oracle.ldap_11.1.1/ldapjclnt11.jar -DORACLE_HOME=$ORACLE_HOME/oracle_common oracle.ldap.util.LDIFMigration   input_file=<ldif template>  output_file=<outputfile>  namespace=<GroupBase>  -load dn=<bindDn> password=<>  host=<hostName> port=<portNumber>

When using Oracle Virtual Directory with an LDAP-based directory server, the host, port, dn, and groupbase refer to Oracle Virtual Directory and not the LDAP server.

2.3 Configuring Single Sign-On (SSO)

By default, the Oracle Access Manager 11g agent provides single sign-on functionality for Oracle Identity Navigator and the following Identity Management consoles:

- Oracle Identity Manager

- Oracle Access Management

- Oracle Adaptive Access Manager

- Oracle Authorization Policy Manager

- Oracle Privileged Account Manager

The Access Manager agent can only protect consoles in a single domain. If your environment spans multiple domains, you can use Access Manager 11g Webgate for Oracle HTTP Server 11g. To configure Oracle Identity Navigator for Webgate-based single sign-on, see the chapter "Integrating with Oracle Identity Navigator" in Oracle Fusion Middleware Integration Guide for Oracle Identity Management Suite.

2.4 Configuring Secure Socket Layer (SSL)

The web.xml file provides configuration and deployment information for a Web application, such as Oracle Identity Navigator. The Oracle Identity Navigator web.xml file is located in oinav.ear. The optional <user-data-constraint> element in web.xml can be used to specify a transport guarantee that prevents content from being transmitted insecurely. Within the <user-data-constraint> tag, the <transport-guarantee> tag defines how communication should be handled. There are three possible values for that tag:

- NONE – the application does not require any transport guarantees.

- INTEGRAL – the application requires that data sent between the client and server be sent in a manner that it cannot be changed in transit.

- CONFIDENTIAL – the application requires that data be transmitted in a manner that prevents other entities from observing the contents of the transmission.

Because Oracle Identity Navigator supports both SSL and non-SSL connections to component consoles, the web.xml attribute <user-data-constraint> is set to a default value of NONE. That is, Oracle Identity Navigator does not, by default, support a constraint for a transport guarantee. If you want such a guarantee, you can change the <transport-guarantee> tag within the <user-data-constraint> tag to either INTEGRAL or CONFIDENTIAL.

2.5 Getting Started with Oracle Identity Navigator

Log in as an administrator as follows:

1. Start the WebLogic Server.

2. Enter the following URL in a browser:

http://host:port/oinav

where port is the Managed Server port.

3. Supply the Administrator Username and Password. The Administrator account must exist in the identity store and have the Oracle Identity Navigator Administrator role.

4. Click Log In.

2.5.1 Initial Configuration Tasks

You must have appropriate privileges to perform the following tasks.

1. Configure component categories. See Section 2.6, "Managing the Product Launcher". Next add components manually or by using discovery. See Section 2.6.1, "Adding a Component Link to the Product Launcher by Using Product Discovery".
You must be the Oracle Identity Navigator administrator or have the Application Configurator Common Admin Role to perform this task.

2. Configure BI Publisher. See Section 2.5.2, "Configuring Oracle Business Intelligence Publisher".
You must be the Oracle Identity Navigator administrator or have the Application Configurator Common Admin Role to perform this task.

3. If your RSS feed is outside a firewall, configure a proxy. See Section 2.5.3, "Configuring a Proxy to Access News Feeds".
You must be an administrator to perform this task.

4. If needed, configure Oracle Privilege Account Manager. See Section 2.5.4, "Configuring Oracle Privileged Account Manager".

2.5.2 Configuring Oracle Business Intelligence Publisher

Oracle Identity Navigator has been integrated with Oracle BI Publisher. The integrated interface supports stronger customization than when using BI Publisher alone. Using the integrated interface enables each administrator to customize their Dashboard page. The report tree has fewer levels when viewed in Oracle Identity Navigator than when using BI Publisher alone, which reduces the number of clicks to access reports.

Note:

Only one Oracle Business Intelligence Publisher instance can be connected to an Oracle Identity Navigator instance.

2.5.2.1 Before You Create a Connection to BI Publisher

Before you attempt to create a connection between Oracle Identity Navigator and an instance of BI Publisher, you must install BI Publisher 11.1.1.5.0, or higher, and configure the report templates. For information about installing BI Publisher, see Oracle Fusion Middleware Installation Guide for Oracle Business Intelligence.

BI Publisher 10g reports are not supported. For information about how to remove any 10g reports, see Section 2.5.2.1.1, "Removing BI Publisher 10g Reports."

Optionally, you can configure BI Publisher for SSL. For more information, see Section 2.5.2.1.3, "Configuring BI Publisher for SSL (Optional)."

2.5.2.1.1 Removing BI Publisher 10g Reports

BI Publisher 10g reports are not supported and cannot be viewed in this release. If you have upgraded from an earlier version of Oracle Identity Navigator, you can remove both the connection to the BI Publisher 10g instance and any 10g reports.

To remove the BI Publisher 10g reports, proceed as follows:

1. Go to the following location:

cd DOMAIN_HOME/servers/AdminServer/tmp/_WL_user/oinav_11.1.1.3.0

Two randomized directories are found. For example, 542tm8 and 8mz05i.

2. Change to the directory that contains the adf/mds/oracle-part/oracle/adf/rc/metadata/IdmNavigator directory. For example:

cd 542tm8/adf/mds/oracle-part/oracle/adf/rc/metadata/IdmNavigator

3. Make a back up of the IdmNavigator directory.

4. Remove the BIConn.xml file and the mdssys folder from the idmNavigator directory.

5. Restart WebLogic Server.
You can now create a connection to BI Publisher 11.1.1.5.0 or higher. For more information, see Section 2.5.2.2, "Creating a Connection to BI Publisher."

2.5.2.1.2 Configuring BI Publisher Report Templates

Oracle Identity Management BI Publisher report templates are installed as zip files under Oracle home directories. For each component, all the templates are in a single zip file. All templates are the Audit Report type.

The template zip files are located in specific directories under the component Oracle homes. For example:

Component

Directory Under Oracle Home

Oracle Adaptive Access Manager

oaam/reports

Oracle Access Management

oam/server/reports

Oracle Identity Manager

server/reports

Oracle Privileged Account Manager

opam/reports

To configure the report templates, copy then unzip each zip file to the Audit Report folder located under the BI Publisher Report root folder. Copy and unzip other report-type zip files to the BI Publisher Report root folder. Use the BI Publisher web interface to configure data sources with report databases.

See Also:

- Oracle Fusion Middleware Administrator's Guide for Oracle Business Intelligence Publisher.

- "Using Audit Analysis and Reporting" in Oracle Fusion Middleware Application Security Guide.

2.5.2.1.3 Configuring BI Publisher for SSL (Optional)

If you plan to use an SSL connection between Oracle Identity Navigator and BI Publisher, you must configure BI Publisher for SSL, as described in "Configuring BI Publisher for Secure Socket Layer (SSL) Communication" in Oracle Fusion Middleware Administrator's Guide for Oracle Business Intelligence Publisher. In addition to configuring BI Publisher for SSL, you must provision a CA certificate to Oracle Identity Navigator so it can connect to BI Publisher through SSL.

To provision the CA certificate, proceed as follows:

1. Import the BI Publisher CA certificate into the Oracle WebLogic Server trust store, using the keytool command.

keytool -keystore trust_store -export -alias alias -file certificate_file

For example:

keytool -keystore truststore.jks -export -alias cacert -file cacert.cer

If you get a hostname verification error when you issue the keystore command, disable hostname verification by adding the following flag to EXTRA_JAVA_PROPERTIES in the file setDomainEnv.sh:

-Dweblogic.security.SSL.ignoreHostnameVerification=true

Then issue the keystore command again.

2. Restart the WebLogic Server.

See Also:

Oracle Fusion Middleware Securing Oracle WebLogic Server for additional information about configuring SSL on the Oracle WebLogic Server.

2.5.2.2 Creating a Connection to BI Publisher

To create a connection, proceed as follows:

1. Click the Administration tab.

2. Expand BI Publisher.

3. In the right pane, enter values for Host, Port, User, and Password.

4. If you have configured Oracle Identity Navigator and BI Publisher to use an SSL connection, select SSL.

5. Under Specify BI Publisher report components, click Create.

6. Select a component and supply a name and path.
To limit the connection entry to a subset of the reports available for the component, click the Finder icon and navigate to the desired path. You can have more than one path for a component. Using paths in this manner can reduce the amount of text associated with a report name on the Dashboard.

Repeat for each component you want to add.

7. Click Test to verify the connection information you have supplied. A dialog will verify that the connection has succeeded or tell you why it failed.

8. If the test succeeds, click Apply to finish the configuration. If the test fails, consult the appropriate administrator at your site.

9. To delete a component, select it and click Delete, then click Apply.

After BI Publisher has been configured, the My Reports section of the Dashboard page will contain the link Click here to create reports.

Note:

If you change the name or path of a component, the new name or path will apply to new reports. The reports that are already saved are not modified.

2.5.3 Configuring a Proxy to Access News Feeds

You may need to specify a proxy so that Oracle Identity Navigator can access Oracle news feeds from inside your firewall. You do this by adding lines to the setDomainEnv.sh script, which is in the bin directory of your WebLogic domain. For example:

$MIDDLEWARE_HOME/user_projects/domains/base_domain/bin/setDomainEnv.sh

The file name is setDomainEnv.sh on Linux and UNIX systems and setDomainEnv.cmd on Windows systems. The script sets the domain-wide environment variables for starting and running a WebLogic Server instance. It is invoked by the startWebLogic and stopWebLogic commands.

The Identity Management Discussion Forums uses SSL. To access this feed, you must minimally add the following lines to EXTRA_JAVA_PROPERTIES in the setDomainEnv.sh file.

-Dhttp.proxyHost=proxy_server_host
-Dhttp.proxyPort=proxy_server_port
-Dhttp.nonProxyHosts=non_proxy_hosts
-Dhttps.proxyHost=ssl_proxy_server_host
-Dhttps.proxyPort=ssl_proxy_server_port
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.allowSmallRSAExponent=true

Consider this example:

- Oracle Identity Management components, including Oracle Identity Navigator are deployed in the Oracle WebLogic Server domain mycompany.com. The domain also contains the machines server1.mycompany.com and server2.mycompany.com.

- A firewall exists between the domain in mycompany.com and the Oracle news feed server. You must route news feed requests from Oracle Identity Navigator through the proxy server to the Oracle news feed site outside the firewall.

- HTTP requests sent to servers server1.mycompany.com and server2.mycompany.com need not be routed to the proxy server.

You would add the following lines to the setDomainEnv.sh file on the WebLogic Server.

EXTRA_JAVA_PROPERTIES="-Dhttp.proxyHost=www-proxy.mycompany.com -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=server1.mycompany.com|server2.mycompany.com ${EXTRA_JAVA_PROPERTIES}"
export EXTRA_JAVA_PROPERTIES

For completeness, you can also add the following additional lines:

-DftpProxyHost=ftp_host
-DftpProxyPort=FTP_proxy_server_port
-DsocksProxyHost=SOCKS_proxy_server_host
-DsocksProxyPort=SOCKS_proxy_server_port

You must restart WebLogic Server for the changes to take effect.

2.5.4 Configuring Oracle Privileged Account Manager

Oracle Privileged Account Manager manages privileged accounts that are not being managed by any other Oracle Identity Management components. After Oracle Privileged Account Manager is installed you must select a user and grant that person the Application Configurator role using the Access Privileges page. The Application Configurator user must configure Oracle Privileged Account Manager to enable communication with the Oracle Privileged Account Manager server. When this communication is successful, the Oracle Privileged Account Manager GUI will be populated with content.

For more information about this requirement, see the chapter "Getting Started with Administering Oracle Privileged Account Manager" in Oracle Fusion Middleware Administrator's Guide for Oracle Privileged Account Manager.

For information about granting a role assignment to a user, see Section 2.7, "Managing Access Privileges".

2.6 Managing the Product Launcher

As an Administrator, you can modify the list of categories and components that appear on the Product Launcher.

You can add components within a category using either of two methods:

- Specify component console information.

- Specify host information and use product discovery to determine which component consoles are available.

2.6.1 Adding a Component Link to the Product Launcher by Using Product Discovery

From the Administration tab, you can use product discovery to discover all active Java EE components in the domain, including the Oracle WebLogic Server console and Oracle Enterprise Manager Fusion Middleware Control.

1. Click the Administration tab.

2. Under Product Registration, select Discover Product(s). The Domain Selection page of the product discovery wizard appears in the right pane.

3. Specify the Host, Port, User, and Password for the server from which you want to discover components. If you are using the SSL port, select SSL.
Click Next.

4. On the Available Products page, select the component consoles you want to add to Oracle Identity Navigator. For each console you select, specify a Display Name. If a category has not been selected automatically, select a category from the Category list.
Click Next.

5. On the Product Removed page, you can optionally select previously discovered components to be removed.
Click Next.

6. Review the status of the links on the Confirmation page. If necessary, click Back and correct any errors. When the Confirmation page is correct, click Finish.

2.6.2 Adding a Link to the Product Launcher Without Product Discovery

Add a link as follows:

1. Click the Administration tab.

2. Under Product Registration, click the Create Product Link icon or select Create Product Link from the Actions list.

3. In the New Product Registration dialog, select the type of component you want to add.

4. Provide values for Category, Display Name, Type, Version, Host, Port, and URL.

5. Click OK to add the link or Cancel to abandon adding the link.

2.6.3 Editing a Link

Edit a link as follows:

1. Click the Administration tab.

2. Under Product Registration, click the product you want to edit.

3. On the Product Registration screen, make desired changes

4. Click Apply to apply the changes or Revert to remove the changes you have made.

2.6.4 Removing a Link

Remove a link as follows:

1. Click the Administration tab.

2. Under Product Registration, highlight the item you want to remove.

3. Click the Delete Product Link icon or select Delete Product Link from the Actions list.

4. In the Confirmation dialog, click OK to proceed or click Cancel to cancel the deletion.

You can also use the product discovery interface to delete several links at once.

2.6.5 Adding a Category

Add a component category as follows:

1. Click the Administration tab.

2. Under Product Registration, select Create Category from the Actions list.

3. In the right pane, enter the component category name.

4. Click Save.

5. Verify that the new category has been added to the left pane.

2.6.6 Editing a Category

Edit a category as follows:

1. Click the Administration tab.

2. Under Product Registration, select a product category. The product category information appears tin the right pane.

3. Make the desired changes.

4. Click Apply.

2.6.7 Removing a Product Category

Remove a category as follows:

1. Click the Administration tab.

2. Under Product Registration, select a product category. The product category information appears in the right pane.

3. Select Delete Category from the Actions list.

4. Click OK in the confirmation dialog.

2.7 Managing Access Privileges

Use the Access Privileges page to assign Common Admin Roles to users or to view the role assignments granted to users, by component name. You can search for a user or a Common Admin Role using the Access Privileges page Search pane. If the search is successful, select from the results list and data for the user or role appears in the right pane.

When working with users, the Common Admin Roles display in a table on the right side. The different components are shown in separate table columns.

To view the Access Privileges page:

1. Click the Administration tab.

2. Click Access Privileges in the navigation panel.

2.7.1 Searching for Users

Search for users from the Search pane in the Access Privileges page.

Note:

You can only view users after the domain identity store has been configured as the authentication source. For more information, see Section 2.1, "Configuring the Identity Store".

To search for a user:

1. Select User from the Type list.

2. Provide a search string, which can be a user name, user ID, or email address, or a substring, of any of these.

3. Click the arrow. All users who match the criteria is displayed.

4. Select the desired user from the results list to view, set, or modify their access privileges. The information appears in the right pane.

2.7.2 Searching for Common Admin Roles

The Common Admin Roles must have enterprise roles configured before they will be visible in the Access Privileges page. For more information, see Section 2.2, "Configuring the Enterprise Roles".

To search for a Common Admin Role:

1. Select Common Admin Role from Type. The list of roles is displayed.

2. Select a role from the results list to view which users are assigned to that role. The information displays on the right.

2.7.3 Assigning a Common Admin Role

To assign a Common Admin Role to a user:

1. Search for the user by following the steps in Searching for Users.

2. Select the user name from the Search pane. The Access Privileges page displays.

3. Select the Role Name in the corresponding component column.
For information about the access rights granted by Oracle Identity Navigator administrative role types, see Section 1.4, "Administrative Role Types".

For information about the access rights granted by Oracle Privileged Account Manager administrative role types, see "Administration Role Types" and "Assigning the Application Configurator Role to a User" in Oracle Fusion Middleware Administrator's Guide for Oracle Privileged Account Manager.

4. Click Apply to save the new settings or Revert to discard them.

2.8 Migrating Oracle Identity Navigator from Test to Production

For information about moving Oracle Fusion Middleware components, including Identity Management components, from a test environment to a production environment, see "Moving from a Test to a Production Environment" in Oracle Fusion Middleware Administrator's Guide.

2.9 Advanced: Configuring Component Administrative Role-Based Access

A component administrator has the privileges required to manage reports for a specific Identity Management application. Each component administrator can customize his or her own Dashboard page. Component administrators cannot access the Administration page of Oracle Identity Navigator.

Table 2-1 describes the Identity Management component specific Oracle Identity Navigator administrative roles and the access rights each conveys.

Table 2-1 Component Specific Administrative Roles

Component Specific Oracle Identity Navigator Admin Role Name

Access Right Granted

OIM_ADMIN

- Access to all the product links in the Product Launcher.

- Access to Oracle Identity Manager reports in My Reports page.

OAM_ADMIN

- Access to all the product links in the Product Launcher.

- Access to the Oracle Access Management reports in My Reports page.

OAAM_ADMIN

- Access to all the product links in the Product Launcher.

- Access to the Oracle Adaptive Access Manager reports in My Reports page.

OWSM_ADMIN

- Access to all the product links in the Product Launcher.

- Access to the Oracle Web Services Security reports in My Reports page.

OPAM_SECURITY_AUDITOR

Access to the Oracle Privileged Account Manager reports in My Reports page.

These roles enable fine grained access control for all the reports. The following enterprise roles must be created in the domain identity store before you can begin using them:

- OAM_ADMIN

- OIM_ADMIN

- OAAM_ADMIN

- OWSM_ADMIN

- OPAM_SECURITY_AUDITOR

After creation, users or groups that are members of the enterprise roles have the appropriate access privileges.

2.10 Troubleshooting

This section describes some problems that you could encounter while configuring or using Oracle Identity Navigator.

2.10.1 Cannot Access Oracle Identity Navigator in Browser

Problem

You enter the URL for Oracle Identity Navigator into a browser and attempt to access it. You receive an error message.

Solution

In a dual-stack, IPv4 and IPv6 environment, some URLs might be inaccessible from your browser. Consult your network administrator for more information.

2.10.2 Report Problems

Problem

You cannot create a connection to BI Publisher.

Solution

Make sure the Oracle WebLogic Server and BI Publisher server are running.

Problem

You cannot create or run a report.

Solution

Different login accounts might have different roles. If you log in as a user who does not have the Oracle Access Manager administrator role, for example, you will not be able to create Oracle Access Manager reports.

Make sure the Oracle WebLogic Server, BI Publisher server, and Oracle Database are running.

You can access BI Publisher reports from BI Publisher itself. Doing so can help you determine whether a configuration problem is due to Oracle Identity Navigator or BI Publisher.

Consult Oracle WebLogic Server logs.

Problem

You cannot view PDF reports with Adobe Reader in a browser.

Solution

Either upgrade to a newer version of Reader or configure Reader to run directly, not as an embedded function within the browser. See your Adobe Reader documentation for more information.

Problem

You cannot view a report in MHTML format.

Solution

Open the report in HTML format.

2.10.3 Cannot View the Common Admin Roles

Problem

You cannot view the Common Admin Roles in the Oracle Identity Navigator user interface.

Solution

Verify enterprise roles have been created to support the Common Admin Roles. For more information, see Section 2.2, "Configuring the Enterprise Roles".

3 Using the Oracle Identity Navigator Dashboard

This chapter describes how to access and use Oracle Identity Navigator as a component administrator. For information about managing Oracle Identity Navigator as an Oracle Identity Navigator administrator, see Chapter 2, "Managing Oracle Identity Navigator." It contains the following topics:

- Section 3.1, "Launching Oracle Identity Navigator"

- Section 3.2, "Logging in to Oracle Identity Navigator"

- Section 3.3, "Launching a Component Administrative Console"

- Section 3.4, "Managing Your Reports"

- Section 3.5, "Viewing Your Profile"

- Section 3.6, "Viewing Your Common Admin Roles"

- Section 3.7, "Reading News and Announcements"

- Section 3.8, "Personalizing Oracle Identity Navigator"

3.1 Launching Oracle Identity Navigator

Oracle Identity Navigator is installed as part of Oracle Identity and Access Management installation. To launch Oracle Identity Navigator, first start Oracle WebLogic Server, then enter the following URL in a browser:

http://host:port/oinav

where port is the Managed Server port.

Note:

In a dual-stack, IPv4 and IPv6 environment, some URLs might be inaccessible from your browser. Consult your network administrator for more information.

3.2 Logging in to Oracle Identity Navigator

Different login accounts might have different roles. If you log in as a user who does not have the Oracle Access Management administrator role, for example, you will not be able to create Oracle Access Management reports, and you won't have single sign-on access to the Oracle Access Management console.

To log in:

1. Supply the User ID and Password for the administrator account you want to log in to.

2. Click Log In.

3.3 Launching a Component Administrative Console

1. Click the Dashboard tab

2. Under Identity Management Product Launcher, click the entry.

If a product has been integrated with single sign-on, and you are logged in as an administrator with the appropriate role, you can access its console without logging in again.

3.4 Managing Your Reports

Adding a report to the My Reports portlet enables you to designate a filter, view, and name for a report. Running the report results in real time retrieval of data.

Note:

Oracle BI Publisher 11.1.1.5.0, or higher, reports are supported. You cannot open reports in BI Publisher 10g format. For information about how to remove any 10g reports, see Section 2.5.2.1.1, "Removing BI Publisher 10g Reports."

3.4.1 Adding a New Report

1. Click the Dashboard tab.

2. If necessary, expand My Reports.

3. Under My Reports, click the Create icon.

4. In the Create Report dialog, select the desired report type in the left panel.

5. Expand the folder in the tree to locate the desired report.

6. Click the report.

7. In the Create Report dialog, supply the required information in the fields.

Note:

In the Create Report dialog, Report Details, Report Name, Template, and Format labels are translated as specified by your browser locale setting. Other report details are localized based on the BI Publisher user interface language preference.

8. Click Create Report to create the report.

9. When you are finished adding reports, click Close.
The report icon for each report you have created is now available under My Reports.

3.4.2 Editing a Report

1. Click the Dashboard tab.

2. Under My Reports, highlight the report you want to edit.

3. Click the Edit icon.

4. In the Edit dialog, make desired changes.

5. Click Save to save the changes or Cancel to cancel the changes.
The report icon is now available under My Reports.

3.4.3 Cloning a Report

1. Click the Dashboard tab.

2. Under My Reports, highlight the report you want to clone.

3. Click the Create Like icon.

4. In the Clone Report dialog, make the desired changes to the report name, template and output format.

5. Click Save to save the new report or Cancel to abandon adding the report.
The report icon is now available under My Reports.

3.4.4 Removing a Report

1. Click the Dashboard tab.

2. Under My Reports, highlight the report you want to delete.

3. Click the Remove icon.

4. In the Confirmation dialog, click OK to continue with the removal or Cancel to abandon the removal.

3.4.5 Running a Report

1. Click the Dashboard tab.

2. Under My Reports, navigate to the desired report

3. Click the icon for the report you want to generate.

4. The report runs, then appears in a separate browser tab or window.

Note:

If you encounter problems viewing PDF reports with Adobe Acrobat Reader in a browser, either upgrade to a newer version of Reader or configure Reader to run directly, not as an embedded function within the browser. See your Adobe Reader documentation for more information.

3.5 Viewing Your Profile

1. Click the Dashboard tab.

2. Under My Profile Information, click the Profile tab. Your profile is listed.

3.6 Viewing Your Common Admin Roles

1. Click the Dashboard tab.

2. Under My Profile Information, click the Common Admin Roles tab.
All common admin role types are listed. Administration role assignments are indicated by a checkmark in the column corresponding to product name.

3.7 Reading News and Announcements

1. Go to the News and Announcements portal on the Dashboard.

2. Click the desired topic, Oracle Security Alerts, Oracle New Downloads, or Identity Management Discussion Forum.

3.8 Personalizing Oracle Identity Navigator

Oracle Identity Navigator uses Oracle Composer to enable runtime customization of the Dashboard page. Changes are stored in Metadata Services and are available only to the user who made them.

You can personalize the Dashboard in either View or Edit mode.

View mode is the normal state when you are running Oracle Identity Navigator in a browser. In View mode, you can rearrange page components by dragging and dropping them or by using the Actions menus. You can change the page layout by clicking the Change Layout icon and selecting a layout option.

You enter Edit mode by clicking Customize in the global navigation links. In Edit mode, you can add page resources by clicking Add Content and selecting which resource to add. You can remove content from a page section by clicking the Remove icon. You can edit a page section by clicking the Edit icon. A Component Properties Dialog with multiple tabs enables you to customize the page section.

For more information about using Oracle Composer to customize pages, see the "Enabling Runtime Editing of Pages Using Oracle Composer" chapter in Oracle Fusion Middleware Developer's Guide for Oracle WebCenter.

Note:

In the Component Properties dialog, the display name and values of attributes shown on the Display Options tab are in English, even if your Locale is set to a non-English value.

3.8.1 Rearranging the Page Layout

You can change the layout of the Dashboard.

1. Click the Customize icon on the upper right.

2. To add content to a column, click Add Content at the top of the column.

3. Select the type of portal you want to add and click Add.

4. To change the layout, click Change Layout.

5. Select the layout you want. Click the triangle in the upper right to change the layout.

6. When you have finished customizing the page, click Close on the upper right.

7. To move a portal to a different position on the page, click the View Actions Menu icon next to the portal.

Index
A  B  C  E  I  L  M  N  O  P  R  S  T  U  W

A

Access Privileges

managing, 2.7

admin role types

Common Admin Roles specific to Oracle Identity Navigator, 1.4

overview, 1.4

administrator

Common Admin Roles, 1.4

component, 1.4

logging in as, 2.5

Administrators group, 1.4

B

BI Publisher

configuring, 2.5.2

connecting to, 2.5.2.2

My Reports, 1.5.2

unable to connect, 2.10.2

bootstrap user

weblogic user, 1.4

C

changing domains, 2.8

Common Admin Roles

assigning, 2.7.3

cannot view, 2.10.3

configuring enterprise roles, 2.7.2

overview, 1.3

searching for, 2.7.1

specific to Oracle Identity Navigator, 1.4

summary, 1.3

summary of Oracle Identity Navigator roles, 2.7.3

component specific admin roles summary, 2.9 configuring

enterprise roles, 2.2, 2.7.2

identity store, 2.1

SSL, 2.4

customizing the dashboard, 3.8

E

enterprise roles

configuring, 2.2

I

identity store

configuring, 2.1

configuring OID authenticator, 2.1

configuring Oracle Virtual Directory, 2.1

Oracle Internet Directory, 2.1

Oracle Virtual Directory, 2.1

initial configuration, 2.5.1 IPv6 environment, 2.10.1

L

launching

a component administrative console, 3.3

Oracle Identity Navigator, 3.1

logging in, 3.2

as administrator, 2.5

M

management

Access Privileges page, 2.7

changing domains, 2.8

configuring BI Publisher, 2.5.2

connecting to BI Publisher, 2.5.2.2

initial configuration, 2.5.1

list of categories and products in product launcher, 2.6

migrating from test to production, 2.8

product discovery of consoles, 2.6.1

proxy configuration, 2.5.3

reports, 3.4

role-based access, 2.9

My Reports portlet, 1.5.2

N

news and announcements

overview, 1.6

reading, 3.7

news feeds

configuring a proxy, 2.5.3

O

OID authenticator

configuring, 2.1

Oracle Internet Directory

configuring as identity store, 2.1

Oracle Virtual Directory

as identity store, 2.1

configuring as identity store, 2.1

Oracle WebLogic Server

administrators group, 1.4

other products

relationships with, 1.1

P

page layout of dashboard

customizing, 3.8.1

personalizing the dashboard, 3.8 product discovery of consoles, 2.6.1 product launcher

list of product categories and products, 2.6

proxy

configuring to access news feeds, 2.5.3

R

relationships with other products, 1.1

reports

managing, 3.4

role-based access

configuring, 2.9

RSS feeds, 1.6

S

searching

for Common Admin Roles, 2.7.1

for users, 2.7.1

secure transport guarantee, 2.4 setDomainEnv file

configuring a proxy for news feeds, 2.5.3

single sign-on

configuring, 2.3

SSL, configuring, 2.4 system requirements and certification, 1.7

T

test to production

migrating, 2.8

troubleshooting, 2.10

U

users, searching for, 2.7.1

W

WebGate-based single sign-on, 2.3

weblogic user, 1.4

bootstrap user, 1.4

web.xml, 2.4

Oracle Legal Notices

Copyright Notice

Copyright © 1994-2016, Oracle and/or its affiliates. All rights reserved.

License Restrictions Warranty/Consequential Damages Disclaimer

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

Warranty Disclaimer

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

Restricted Rights Notice

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

Hazardous Applications Notice

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Trademark Notice

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

Third-Party Content, Products, and Services Disclaimer

This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle.

Alpha and Beta Draft Documentation Notice

If this document is in preproduction status:

This documentation is in preproduction status and is intended for demonstration and preliminary use only. It may not be specific to the hardware on which you are using the software. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to this documentation and will not be responsible for any loss, costs, or damages incurred due to the use of this documentation.

Private Alpha and Beta Draft Documentation Notice

If this document is in private preproduction status:

The information contained in this document is for informational sharing purposes only and should be considered in your capacity as a customer advisory board member or pursuant to your beta trial agreement only. It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decisions. The development, release, and timing of any features or functionality described in this document remains at the sole discretion of Oracle.

This document in any form, software or printed matter, contains proprietary information that is the exclusive property of Oracle. Your access to and use of this confidential material is subject to the terms and conditions of your Oracle Master Agreement, Oracle License and Services Agreement, Oracle PartnerNetwork Agreement, Oracle distribution agreement, or other license agreement which has been executed by you and Oracle and with which you agree to comply. This document and information contained herein may not be disclosed, copied, reproduced, or distributed to anyone outside Oracle without prior written consent of Oracle. This document is not part of your license agreement nor can it be incorporated into any contractual agreement with Oracle or its subsidiaries or affiliates.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.