Oracle® Fusion Middleware

Administering the Siebel Application Adapter for Oracle WebCenter

11g Release 1 (11.1.1)

E17045-05

December 2016

Documentation on the Siebel Application Adapter for administrators that describes the configuration for Siebel with Oracle WebCenter Content.

Oracle Fusion Middleware Administering the Siebel Application Adapter for Oracle WebCenter, 11g Release 1 (11.1.1)

E17045-05

Copyright © 2009, 2016, Oracle and/or its affiliates. All rights reserved.

Primary Author:  Sarah Howland, Bruce Silver, Divya Ramabhadran

Contributor:  Kevin de Smidt, Jason Schindhelm, Sreekanth Chintala, Rama Vijjapurapu.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle.

Contents

Preface

- Audience

- Documentation Accessibility

- Related Documents

- Conventions

What's New in This Guide

- New and Changed Features for 11g Release 1 (11.1.1.9)

- New and Changed Features for 11g Release 1 (11.1.1.8)

1 Siebel Adapter for Oracle WebCenter Content Overview

- 1.1 About the Adapter

- 1.2 Automatically Configured Siebel Entities

- 1.3 System Architecture

- 1.4 Managed Attachments Options

- 1.5 User IFrame Authentication

- 1.6 Document Security

2 Configuring the Adapter

- 2.1 System Requirements

- 2.2 Configuring the Adapter for Content Server

- 2.2.1 Verify Required Content Server Components

- 2.2.2 Upload and Import the Configuration Migration Utility Bundle

- 2.2.3 Enable the Siebel Adapter Content Server Components

- 2.2.4 Set the Configuration Variables

- 2.3 Configuring the Adapter for Siebel

- 2.3.1 Lock Siebel Objects

- 2.3.2 Import the SIF File

- 2.3.3 Compile Locked Projects

- 2.3.4 Configure the IFrame URL in the Siebel Web Client

- 2.3.4.1 Configure the IFrame Height

- 2.3.5 Test the Siebel Configuration

- 2.4 Configuring Oracle WebCenter Enterprise Capture

- 2.4.1 About Document Scanning Using Oracle WebCenter Enterprise Capture

- 2.4.2 Configure Oracle WebCenter Enterprise Capture for the Siebel Adapter

- 2.4.3 Configure Content Server for WebCenter Enterprise Capture via the Adapter

- 2.4.4 Test the WebCenter Enterprise Capture Via Siebel Adapter Configuration

- 2.5 Configuring Oracle Distributed Document Capture

- 2.5.1 About Document Scanning Using Oracle Distributed Document Capture

- 2.5.2 Configure Oracle Distributed Document Capture For the Siebel Adapter

- 2.5.3 Configure Content Server for Distributed Document Capture Via the Adapter

- 2.5.4 Test the Distributed Document Capture Via Siebel Adapter Configuration

- 2.6 Passing Extra Metadata Parameters From Siebel to Content Server

- 2.6.1 Configure Content Server for Extra Parameters

- 2.6.2 Configure Siebel for Extra Parameters

- 2.7 Customizing the Siebel Adapter IFrame Display

- 2.7.1 Add Custom Buttons

- 2.7.2 Dynamically Change the Display Mode

- 2.7.2.1 Calculate the SiebelDisplayMode Integer

- 2.7.2.2 Configure Siebel for Special Display Mode

- 2.7.2.3 Calculate Values for Custom Buttons

- 2.7.3 Change Display Colors

- 2.8 Uninstalling the Adapter

- 2.8.1 Disable Adapter Components on Content Server

- 2.8.2 Uninstall Siebel Components

A Siebel Object Locking

- A.1 Objects Locked During SIF Import and Project Locking Process

- A.1.1 Projects Locked

- A.1.2 Applets Locked

- A.1.3 Views Locked

- A.1.4 Business Components Locked

- A.2 Activating or Deactivating Siebel Objects

B Configuring Additional Siebel Objects

- B.1 Identifying Objects to Lock

- B.2 Locking Additional Siebel Objects

- B.3 Adding Fields to the Business Component

- B.4 Creating an Applet for the IFrame

- B.5 Modifying Applet View Layout

- B.6 Inactivating Existing Applet from View

- B.7 Adding the New Applet to the View

- B.8 Set IFrame to Refresh When Parent Applet Changed

- B.9 Compiling the Additional Objects Project

- B.10 Configuring the IFrame URL in the Siebel Web Client

- B.11 Testing the Additional Objects Siebel Configuration

- B.12 Creating a SIF File for Export

- B.13 Configuring Content Server

- B.13.1 Adding Content Server Information Fields

- B.13.2 Adding Rules for Displaying Fields

- B.13.3 Editing Necessary Content Server Resource and String Files

Preface

The Oracle WebCenter Administrator's Guide for Oracle's Siebel Adapter describes Oracle Siebel solution configurations for Oracle WebCenter Content systems.

Audience

This document is intended for administrators configuring integration solutions between Oracle Siebel and Oracle WebCenter Content systems.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

Related Documents

For more information, see the Oracle WebCenter User's Guide for Oracle's Siebel Adapter.

Conventions

The following text conventions are used in this document:

Convention

Meaning

boldface

Boldface type indicates graphical user interface elements associated with an action, or terms defined in text or the glossary.

italic

Italic type indicates book titles, emphasis, or placeholder variables for which you supply particular values.

monospace

Monospace type indicates commands within a paragraph, URLs, code in examples, text that appears on the screen, or text that you enter.

What's New in This Guide

This section describes the new and changed Siebel Application Adapter features.

This guide is a new edition of the formerly titled Oracle WebCenter Administrator's Guide for Siebel Application Adapter.

New and Changed Features for 11g Release 1 (11.1.1.9)

The Siebel Adapter for Oracle WebCenter Content 11g Release 1 (11.1.1.9) does not contain any new and changed features for this features document.

New and Changed Features for 11g Release 1 (11.1.1.8)

The Siebel Adapter includes the following new and changed features:

- "Managed Attachments Integration With Oracle WebCenter Enterprise Capture 11g (11.1.1.8)"

Managed Attachments Integration With Oracle WebCenter Enterprise Capture 11g (11.1.1.8)

You can configure the adapter to direct the Oracle WebCenter Enterprise Capture application to scan a document and pass in document metadata values. This allows users to either scan a document using a TWAIN-compliant scanner or import a file from the Managed Attachments IFrame and attach it to the selected Siebel record. Note that users can import non-image files such as PDF or Microsoft Word documents in addition to image files, if allowed by the client profile.

In previous releases, you could direct the Oracle Distributed Document Capture 10g application to scan or import from Managed Attachments. With this release, you can integrate Managed Attachments with the Capture 11g or 10g applications. For information about Managed Attachments integration with Capture 11g, see Section 2.4.

1 Siebel Adapter for Oracle WebCenter Content Overview

This chapter describes the Siebel adapter, lists supported Siebel entities, and describes attachment options, authentication, and document security.

This chapter covers the following topics:

- Section 1.1, "About the Adapter"

- Section 1.2, "Automatically Configured Siebel Entities"

- Section 1.3, "System Architecture"

- Section 1.4, "Managed Attachments Options"

- Section 1.5, "User IFrame Authentication"

- Section 1.6, "Document Security"

1.1 About the Adapter

The Siebel Adapter for Oracle WebCenter Content allows Siebel CRM users to scan, attach, store, and retrieve attachments stored in an Oracle WebCenter Content Server repository. Content Server documents are displayed as managed attachments to Siebel entities in a customizable IFrame within the Siebel application.

1.2 Automatically Configured Siebel Entities

The Siebel Adapter for WebCenter provides a Siebel archive (SIF) file that automatically configures the following Siebel entities:

- Account

- Activity

- Contact

- Asset

- Call Report

- Claim

- Opportunity

- Order

- Project

- Quote

- Service Request

- Public Sector Case objects, including:

- Case

- Arrest

- Offense

- Incident

- Evidence

- Lead

- Group

- Group Suspect

See Section 2.3 for detailed configuration information.

Note:
Additional Siebel entities can be configured for use with the Siebel Adapter for WebCenter by following the instructions in Section B.

1.3 System Architecture

Figure 1-1 illustrates the IFrame configuration for the Siebel adapter.

Figure 1-1 System Architecture for IFrame Configuration for Siebel Adapter

1.4 Managed Attachments Options

When a Siebel user displays a Siebel record such as a contact, Content Server lists the attachments to which the user has access in a Managed Attachments IFrame.

Siebel users can perform the following tasks in the attachments IFrame:

- Open documents in their native application or Web-viewable format

- Check in new documents to Content Server and attach them to the selected Siebel entity

- Detach documents from a Siebel entity

- Refresh the IFrame's list of attachments

- Select and order fields for display in the attachments IFrame

- Search Content Server using advanced search options

- View an attached document's information

- Check out documents, locking them to changes by other users

- Modify a document's metadata values

- Scan and import documents using Oracle WebCenter Enterprise Capture, attaching them to a selected Siebel entity

For details about how users work with Content Server documents in a Siebel application, see the Oracle WebCenter User's Guide for Oracle's Siebel Adapter.

1.5 User IFrame Authentication

Siebel users must have a Content Server account to display the Managed Attachments IFrame within the supported Siebel entity. In addition, the authentication model configured for Content Server and Siebel determines how users are authenticated the first time they display a Siebel record that includes the attachments IFrame:

- Content Server configured for Oracle Single Sign-On: If Siebel is not configured for single sign-on, the Content Server single sign-on login prompt is displayed. (If Siebel is configured for single sign-on, the user has been authenticated, so no login prompt is displayed.)

- Content Server not configured for Oracle Single Sign-On: The Content Server login prompt is displayed, regardless of the selected Siebel authentication model.

1.6 Document Security

Users set a document's security when checking it into Content Server. In the attachments IFrame, Siebel users see only those attachments to which their Content Server account allows them access. So a document attached to a Siebel entity does not appear in the search results for an unauthorized user. It is recommended to use a profile that specifies default security values for document check-in.

2 Configuring the Adapter

This chapter lists system requirements and describes how to configure Oracle Content Server and Siebel for adapter use. It also describes optional configuration, such as scanning via Oracle WebCenter Enterprise Capture, passing additional metadata parameters from Siebel to Content Server, and customizing the adapter IFrame display.

This chapter covers the following topics:

- Section 2.1, "System Requirements"

- Section 2.2, "Configuring the Adapter for Content Server"

- Section 2.3, "Configuring the Adapter for Siebel"

- Section 2.4, "Configuring Oracle WebCenter Enterprise Capture"

- Section 2.5, "Configuring Oracle Distributed Document Capture"

- Section 2.6, "Passing Extra Metadata Parameters From Siebel to Content Server"

- Section 2.7, "Customizing the Siebel Adapter IFrame Display"

- Section 2.8, "Uninstalling the Adapter"

2.1 System Requirements

General requirements for the adapter are listed in this section, and supported configuration and certification information is available at:

http://www.oracle.com/technetwork/middleware/webcenter/content/documentation/documentation-155348.html

The Siebel Adapter for WebCenter Content requires the following:

- Siebel SIA or SEA. The Siebel Web Client is also required.

- Oracle WebCenter Content 11g Release 1 (11.1.1 or higher).

- If implementing scanning functionality, you can use either Oracle WebCenter Enterprise Capture 11g or Oracle Distributed Document Capture 10.1.3.5.1 or later. If using Oracle Distributed Document Capture, you need to install the Oracle UCM 11g Commit Driver.

- The Siebel Adapter supports the following Content Server search engines. For more information, see Section 2.3.4.

- Metadata Only Search

- Database – Full Text Search

- Oracle Text – Full Text Search

2.2 Configuring the Adapter for Content Server

The Content Server configuration procedures are detailed in the following sections:

- Section 2.2.1, "Verify Required Content Server Components"

- Section 2.2.2, "Upload and Import the Configuration Migration Utility Bundle"

- Section 2.2.3, "Enable the Siebel Adapter Content Server Components"

- Section 2.2.4, "Set the Configuration Variables"

2.2.1 Verify Required Content Server Components

Follow these steps to verify that required Content Server components are enabled:

1. Log in to Content Server as an administrator.

2. Click the Configuration for [Instance] link in the Content Server Administration tray.

3. In the Features And Components section, click Enabled Component Details.

4. From the details shown, verify that the following components are enabled. If a component is not listed, enable it.

- CheckoutAndOpenInNative

- ConfigMigrationUtility

- CoreWebdav

- YahooUserInterfaceLibrary

2.2.2 Upload and Import the Configuration Migration Utility Bundle

Follow these steps to upload and import the Siebel adapter bundle:

1. Log back in to Content Server as an administrator.

2. In Content Server, open the Config Migration Admin folder in the Content Server Administration tray, and click the Upload Bundle link.

3. On the Upload Configuration Bundle page, click Browse.

4. Select the SiebelAdapterCMUBundle.zip file, located in the following folder:
ECM_ORACLE_HOME/ucm/Distribution/SiebelEcmIntegration

5. Select the Force overwrite field.

6. Click Upload.

7. On the Configuration Bundles page, select the SiebelIntegrationCmuBundle link. On the Configuration Migration Administration page, select the Overwrites Duplicates field. Select Preview from the item's Actions menu.

8. On the Import Preview page, select Import from the Actions field. (Note that you can ignore messages about skipped dependencies.)

9. Restart Content Server.

2.2.3 Enable the Siebel Adapter Content Server Components

The following Content Server components are provided with the adapter:

Table 2-1 Content Server Components Provided in Siebel Adapter

Content Server Component

Required

Description

SiebelEcmIntegration

Yes

This component provides IFrame functionality.

SiebelFilter

Optional

This component is an optional part of the Siebel Adapter for Oracle WebCenter Content. It enables filtering of the attachments list based on metadata such as Document Type, Author and Security Group.

SiebelIntegrationSearchDisplay

Yes

This component provides searching and IFrame functionality.

SiebelSearchExtension

Optional

This component determines whether documents not yet released are displayed in the attachments list.

- If enabled, all documents in the system are displayed, including those waiting to be indexed or in workflow. When users hover their cursor over an unreleased document, no underline is displayed and the item cannot be selected.

- If not enabled, only released documents are displayed.

Note: This feature is available only when Metadata Only Search is used on the Content Server.

SiebelSearchExtraParams

Optional

This component enables passing Siebel metadata values to Content Server through the New or Scan buttons. For instructions, see Section 2.6. Specify parameters to pass as configuration variables, as described in Section 2.2.4.

Follow these steps to enable the components using Component Manager:

1. Log in to Content Server as an administrator.

2. Select Admin Server from the Administration menu. The Component Manager page is displayed.

3. Scroll to the Integration components section.

4. Select the SiebelEcmIntegration and SiebelIntegrationSearchDisplay components to enable them.

5. Optionally, select the SiebelSearchExtension and SiebelSearchExtraParams components. Note that you can disable these components at any time by deselecting them on this page.

6. Click Update.

7. Restart Content Server.

Note:
For information about restarting methods, see the section on starting, stopping, and restarting Content Server in the Oracle Fusion Middleware Administering Oracle WebCenter Content.

2.2.4 Set the Configuration Variables

Follow these steps to configure the adapter configuration variables:

1. From the Administration tray in Content Server, click the Admin Server link.

2. In the side pane, click the General Configuration link.

3. Scroll to the Additional Configuration Variables section, and edit the following entries. (These entries were automatically created when you imported the Configuration Migration Utility Bundle.)

Note:
The default value for all true/false entries is TRUE, except for the AdapterAppDisplayLinks variable, whose default value is FALSE.

Table 2-2 Configuration Variable Entries

Entry

Description

SiebelCssPath=http://siebel_host:port/main.css

Use to identify the Cascading Style Sheet (CSS) file to use for the IFrame. This entry links the Siebel CSS file with the adapter so that changes to the Siebel CSS also affect the IFrame. This is optional but recommended; if not specified, the IFrame uses the default CSS file.

Example Siebel 7.8 URL:

http://siebelserver:port/files/main.css

Example Siebel 8.x URLs:

http://siebelserver:port/callcenter_enu/files/main.css

http://siebelserver:port/sales_enu/files/main.css

ODDCURLPath

Use to enable document attachment scanning and importing using Oracle WebCenter Enterprise Capture or Oracle Distributed Document Capture. For configuration instructions, see Section 2.4 and Section 2.5.

For Oracle WebCenter Enterprise Capture (11g) integration

This entry specifies the web address to Oracle WebCenter Enterprise Capture:

Format:

ODDCURLPath=http://capture_host:port/dc-client

Example:

ODDCURLPath=http://capture1:16400/dc-client

For Oracle Distributed Document Capture (10g) integration

This entry specifies the web address to Oracle Distributed Document Capture:

Format:

ODDCURLPath=http://ODDC_host/ODDC_webcapture_address

Example:

ODDCURLPath=http://xyz/webcapture.asp

ODDCScanAction=1

ODDCScanAction=2

Use to configure document attachment scanning and importing using Oracle WebCenter Enterprise Capture (as described in Section 2.4) or Oracle Distributed Document Capture (as described in Section 2.5). In this entry, specify the scan action to be performed, where 1 = Scan and 2 = Import.

AdapterAppFrameLessWindowRequired=true

Specify if standard browser menu options are hidden in browser windows that open from the IFrame display (true) or displayed (false).

AdapterAppCheckinNewBtnVisible=true

Specifies if the New button is displayed in the IFrame.

AdapterAppDetachBtnVisible=true

Specifies if the Detach button is displayed in the IFrame.

AdapterAppAdvSrchBtnVisible=true

Specifies if the Search button is displayed in the IFrame.

AdapterAppConfigureBtnVisible=true

Specifies if the Configure button is displayed in the IFrame.

AdapterAppScanBtnVisible=true

Specifies if the Scan button is displayed in the IFrame.

AdapterAppRefreshBtnVisible=true

Specifies if the Refresh button is displayed in the IFrame.

AdapterAppAdvSrchUCMUIVisible=true

Specifies if full Content Server user interface and search access is available when users click the Advanced Search button in the IFrame.

AdapterAppDisplayLinks=false

If needed, use this variable to replace icons in the IFrame with links, by changing the variable's value to true.

extraSiebelDocParams=parameter,parameter,parameter,...

Optionally specify additional parameters to be passed to the New button. See Section 2.6.

Example entry:

extraSiebelDocParams=dDocAccount,xsiebelOrder

extraSiebelScanParams=parameter,parameter,parameter,...

Optionally specify additional parameters to be passed to the Scan button. See Section 2.6.

Example entry:

extraSiebelScanParams=dDocAccount

Note:
You can override the entries that determine if the New, Detach, Search, Configure, Scan, and Refresh buttons are displayed by specifying an alternate display mode, as described in Section 2.7.2.

Note:
You can specify the default columns to be displayed to users in the IFrame. (When the user clicks Reset in the Configure Fields for Display screen, default columns are listed in the Main Information section of the screen.)
Open the config.cfg file and set the value of the SiebelDefaultDisplayColumns configuration variable as a comma-delimited list containing the default fields.

The additional column defaults are title, author, size, and date. To override these additional columns, populate this variable with comma-delimited Content Server metadata field names. For example, the list might include:

dDocTitle,dDocType,dDocAuthor,dInDate

Note:
To avoid an issue with the Siebel Adapter for Content Server, in which the Content Server login page displays in the Siebel page instead of the IFrame, add the following entry to the Content Server config.cfg file:
AllowContentServerInAnyDomains=1

Be aware that setting the AllowContentServerInAnyDomains variable to 1 allows Content Server pages to be opened in IFrames, which could pose a potential security issue.

4. Restart Content Server.

2.3 Configuring the Adapter for Siebel

Follow the steps described in this section to configure the Siebel side of the adapter.

The Siebel configuration procedures include the following:

- Section 2.3.1, "Lock Siebel Objects"

- Section 2.3.2, "Import the SIF File"

- Section 2.3.3, "Compile Locked Projects"

- Section 2.3.4, "Configure the IFrame URL in the Siebel Web Client"

- Section 2.3.5, "Test the Siebel Configuration"

Important Points

Keep the following points in mind during Siebel configuration:

- Siebel adapter Siebel SIF files can be found at the following location after an install:
middleware/Oracle_ECM1/ucm/Distribution/SiebelEcmIntegration

- Ensure that you are compiling to and testing on the same Siebel Repository file (.SRF).

- A typical method is to import the SIF file into the local Siebel database and test it locally. When ready, you can check in the objects to the Siebel server, compile objects, and generate browser scripts.

- New browser scripts that are generated must reside in the appropriate production location (for example, local client/PUBLIC/ENU and/or server Web client (SWE)/PUBLIC/ENU folders).

- Performing the Siebel configuration steps in this section automatically disables display of the corresponding Siebel File System Applets. This occurs when importing the SIF file, which deactivates specific File System attachment applets. If needed, reactivate these applets to display Siebel File System attachments, such as during a migration process. For information on activating and deactivating applets, see Appendix A.

- When the Siebel Adapter for WebCenter Content is configured, Siebel attachments that customers have migrated from Siebel File Systems to Content Server and previously accessed with Siebel EAI or EIM Web services are no longer available. However, these migrated documents could now be accessed using Content Server Web services.

2.3.1 Lock Siebel Objects

The SIF archive file contains changes to multiple Siebel objects, including Projects, Applets, Views, Business Components, and browser scripts. Before importing the SIF file, follow these steps to lock objects to be modified by the import:

1. Log in to Siebel Tools with User ID: SADMIN and Connect to: Local.

Note:
Ensure that you are modifying the correct .SRF repository file.

2. In the Object Explorer of Siebel Tools, select Project.

3. From the Query menu, select New Query (Ctrl+Q).

4. Submit the first query by entering the following text into the Name field and pressing Enter:
Account OR Account ?SSE? OR Asset Management OR Contact OR Contact ?SSE? OR ERM Unified Help Desk OR FINS Call Reports OR FINS Call Reports ?SSE? OR FINS INS Claims OR FINS INS Claims Appraisals/Bills/Attachments OR Oppty OR Oppty ?SSE? OR Order Entry OR Quote OR Quote ?UI?

Note:
If you choose to copy and paste the text string, be sure to first paste the copied text into an ascii editor (such as Notepad) and remove any carriage returns before pasting into the Name field.

5. Select the Locked field for all objects.

6. Start another query by selecting New Query from the Query menu (Ctrl+Q). Enter the following text into the Name field and press Enter:
Service OR Service ?SSV? OR VERT CUT Common OR PS Project Management OR PS Project Management ?SSE? OR Activity OR Activity ?SSE? OR PUB Case OR PUB Evidence OR PUB HLS Incident OR PUB HLS Physical Terrorism OR PUB Lead OR FINS Call Reports2

7. Select the Locked field for all objects.

Note:
Appendix A provides information about which objects are locked. This can be useful if you encounter issues when locking Siebel projects.

2.3.2 Import the SIF File

Follow these steps to import Siebel Adapter for WebCenter Managed Attachments objects into Siebel from a Siebel Archive File from a Siebel archive file using the Import Wizard:

Caution:
On certain custom Siebel configurations, importing the SIF file using the merge option (as described in this procedure) could result in fields, user properties, and joins from custom Siebel configurations being overwritten.

1. From the Tools menu, choose Import From Archive.

2. In the Select Archive To Import dialog box, select the appropriate .sif archive file, and click Import. Available SIF files include:

- Siebel_SEA_7.x_UCM_Attachments_YYYYMMDD.sif

- Siebel_SIA_8.x_UCM_Attachments_YYYYMMDD.sif

- Siebel_SIA_7.x_UCM_Attachments_YYYYMMDD.sif

- Siebel_SEA_8.x_UCM_Attachments_YYYYMMDD.sif

3. The SIF file's contents are displayed in the Import Wizard - Preview screen. Ensure that the Merge option (middle option) from the Conflict Resolution options is selected, and click Next. (This option merges the SIF file changes to existing Siebel Objects.)

4. The wizard displays any conflicting objects found. Click Next.

5. A dialog box lists the changes to be made to the repository, and prompts you to proceed. Click Yes.

6. A summary is displayed. Click Finish.

2.3.3 Compile Locked Projects

Before testing the modified projects, follow these steps to compile them:

1. Select Options from the View menu.

2. In the Development Tools Options screen, select the Scripting tab.

3. In the Browser script compilation folder field, enter a path as follows:
Client Install Folder/PUBLIC/ENU

For example, on Windows Drive_letter:\Siebel_install_folder_path\client\PUBLIC\enu

4. Select Project in the Object Explorer, locate the Manage Attachments (UCM) project and lock it.

5. From the Tools menu, choose Compile Projects.

6. In the Object Compiler screen, select Locked projects.

7. Verify that the correct repository is selected in the Siebel repository file field. This repository file must exist in the Web Client installation folder.

8. Click Compile. (Note that compiling may take a while.)

2.3.4 Configure the IFrame URL in the Siebel Web Client

Follow the steps in this section to configure a symbolic URL in the Siebel Web client to the Managed Attachments IFrame. (A symbolic URL is a type of link that references the Content Server search results page.)

1. Launch the Web client, logging in with the User ID: SADMIN.

2. Choose Sitemap from the Navigate menu. The site map of the Siebel Web Client Application is displayed.

3. From the list of screens, click the Administration- Integration link, then the Symbolic URL Administration link.

4. From the Host Administration field, select Symbolic URL Administration.

5. Click New to create a new record.

6. Complete the following fields for the URL. With the new URL selected in the Symbolic URL table, a Symbolic URL Arguments pane becomes displayed.

Field

Value to Enter

Name

UcmServUrl

URL

http://Content_Server_URL/_p/cc-embedded
(example: http://content-server-name.domain:port-number/cs/idcplg/_p/cc-embedded)

Fixup Name

InsideApplet

SSO Disposition

IFrame

Note:
In certain demonstration environments, entering UcmServUrl in the Name field results in an error. If this occurs, enter the following:
UcmServUrl_Demo

7. In the Symbolic URL Arguments pane, create new argument records by entering the following values. To create a new record, click New, select the new record, and specify its values. Be sure to navigate away from the last record entered to ensure it is saved to the database.
An example of a Symbolic URL follows. (Note that this example URL is separated onto multiple lines for display purposes only, with argument names in bold for clarity.)

http://content-server-name.domain:port-number/cs/idcplg/_p/cc-embedded?
IdcService=GET_SEARCH_RESULTS_FORCELOGIN&
siebelEntityField=xsiebelContact&
siebelEntityValue=1LS-AF98&
QueryText=xsiebelContact+%3cmatches%3e+%601LS-AF98%60&
SearchQueryFormat=Universal&
ResultTemplate=SIEBEL_SEARCH&
coreContentOnly=1&
SortField=dInDate&
SortOrder=Desc&
SearchEngineName=DATABASE.METADATA&
ResultCount=20

Name

Required Argument

Argument Type

Argument Value

Append as Argument

Substitute in Text

Sequence #

IdcService

N

Constant

GET_SEARCH_RESULTS_FORCELOGIN

Y

N

1

siebelEntityField

N

Field

SiebelEntityName

Y

N

2

siebelEntityValue

N

Field

Id

Y

N

3

QueryText

N

Field

QueryText

Y

N

4

SearchQueryFormat

N

Constant

Universal

Y

N

5

ResultTemplate

N

Constant

SIEBEL_SEARCH

Y

N

6

coreContentOnly

N

Constant

1

Y

N

7

SortField

N

Constant

dInDate

Y

N

8

SortOrder

N

Constant

Desc

Y

N

9

SearchEngineName

N

Constant

DATABASE.METADATA

Y

N

10

ResultCount

N

Constant

6
(See Section 2.3.4.1).

Y

N

11

IFrameSRC

N

Command

IFrame Height=280 Width=100%
(See Section 2.3.4.1).

Y

N

12

2.3.4.1 Configure the IFrame Height

The size of the IFrame is based on the ResultCount and IFrameSRC height settings defined in the Symbolic URL.

- ResultCount determines the number of results that display on a results page before pagination controls are added at the bottom of the screen.

- IFrameSRC height determines the height (in pixels) of the IFrame.

If the ResultCount setting causes the IFrame display to exceed the height, a vertical scroll bar is displayed. If users scroll to the bottom, the header information may become hidden.

For this reason, it is recommended that you adjust the ResultCount and IFrameSRC height settings in combination so that no scroll bar is displayed. Ensure that the IFrame height accommodates the result count. A recommended setting combination is an IFrame height setting of 280 and ResultCount setting of 6.

2.3.5 Test the Siebel Configuration

1. Log out of the Web client, then log in again to view the Managed Attachments IFrame embedded in the Attachments tab.

Tip:
To access Views, choose Sitemap from the Navigate menu in the Web client. This displays opportunities, orders, and other options with their child Views and attachment Views.

2. Test the changes locally. After testing is successful, ensure that the objects, including generated browser scripts, are synchronized with the Siebel server.

Note:
If you encounter technical issues in configuring this adapter, on either the Content Server side or the Siebel side, log a service request using My Oracle Support.

Setting AllowContentServerInAnyDomains

If the Content Server login page displays in the Siebel page instead of the IFrame, setting AllowContentServerInAnyDomains=1 in the Content Server config.cfg fixes the issue.

Note:
Be aware that setting the AllowContentServerInAnyDomains variable to 1 allows Content Server pages to be opened in IFrames, which could pose a potential security issue.

2.4 Configuring Oracle WebCenter Enterprise Capture

This section covers the following topics:

- Section 2.4.1, "About Document Scanning Using Oracle WebCenter Enterprise Capture"

- Section 2.4.2, "Configure Oracle WebCenter Enterprise Capture for the Siebel Adapter"

- Section 2.4.3, "Configure Content Server for WebCenter Enterprise Capture via the Adapter"

- Section 2.4.4, "Test the WebCenter Enterprise Capture Via Siebel Adapter Configuration"

Note:
This section describes scanning via Managed Attachments using Oracle WebCenter Enterprise Capture 11g. For information about scanning using Oracle Distributed Document Capture 10g, see Section 2.5.

2.4.1 About Document Scanning Using Oracle WebCenter Enterprise Capture

The Oracle WebCenter Enterprise Capture application allows an application such as the Siebel Adapter to direct it to scan a document and pass in document metadata values. This allows users to scan a document or import a file (image or non-image file such as PDF or Microsoft Word file) from the Managed Attachments IFrame and attach it to the selected Siebel record.

When configured for the Siebel Adapter, document scanning works like this:

1. A Scan button is added to the Managed Attachments IFrame. The user clicks the button, and selects a Document Classification and Security Group, which are assigned to an Oracle WebCenter Enterprise Capture client profile. For example, the user might select a classification of Identity Documents to scan a photocopy of a driver's license or passport. (An Oracle WebCenter Enterprise Capture client profile specifies scanning, importing, and indexing settings.)

2. When the user clicks Scan Document, Oracle WebCenter Enterprise Capture's client launches in a new window and passes in parameters such as the client profile to be used and the Siebel entity value for later attachment.

3. Within the Oracle WebCenter Enterprise Capture client, the user reviews the document, makes changes as needed, completes any metadata fields configured in the client profile, and then releases the batch. Releasing the batch commits the new document to the Content Server using a Capture commit profile configured to commit to WebCenter Content. (A Capture commit profile configured for Content commit specifies connection information and field mappings between WebCenter Enterprise Capture and Content Server metadata fields.)

4. Upon successful batch release, the user returns to the Managed Attachments IFrame and refreshes the display to view the newly scanned document or imported file.

2.4.2 Configure Oracle WebCenter Enterprise Capture for the Siebel Adapter

Follow these steps to configure attachment scanning on the Oracle WebCenter Enterprise Capture side:

1. If needed, configure Single Sign-on (SSO) for Oracle WebCenter Enterprise Capture.
As long as the Siebel adapter solution and WebCenter Enterprise Capture are configured in Oracle Access Manager (OAM), Capture users can be authenticated via SSO.

2. In the Capture Workspace Console, add metadata fields to a selected workspace for capturing values for new documents, as shown in Figure 2-1. For details, see the section on the Capture Workspace Console in Oracle Fusion Middleware Managing Oracle WebCenter Enterprise Capture.

1. Create metadata fields for values you want to save with attached documents on the Content Server. For example, you might configure Doc Type and Security Group choice list metadata fields for users to select from standard settings.

2. Create a metadata field to contain the Siebel entity value. Name the field based on the Siebel entity you are using, listed in the following table.

Identifier

dDocAuthor

dDocAccount

xAccountId

xsiebelAcct

xsiebelActivity

xsiebelArrest

xsiebelAsset

xsiebelCallRpt

xsiebelCase

xsiebelClaim

xsiebelContact

xsiebelEvidence

xsiebelGroup

xsiebelIncident

xsiebelLead

xsiebelOffense

xsiebelOpprnty

xsiebelOrder

xsiebelProject

xsiebelQuote

xsiebelSuspect

xsiebelSvcReq

Note:
Capture allows you to map DocAuthor as a custom metadata field. This ensures that the documents can have an author other than the default author.

Figure 2-1 WebCenter Enterprise Capture, Metadata Fields

Note:
The Siebel identifier metadata fields (named xsiebel<entity>, as in xsiebelContact and xsiebelAcct) store Siebel entity values used for linking attachments to Siebel entities. Because they are not stored as regular metadata fields, they are not searchable and administrators configuring profiles should not treat them as regular metadata fields. (By default, these identifier fields are not visible to users in WebCenter Content. While users can enter search values into the fields if displayed, matching documents will not be found by the Content Server search engine.)
Users can attach documents to entities by entering entity row IDs into the Siebel identifier fields as a comma-separated list. In this case, Managed Attachments stores the values in a separate database table.

3. On the Workspace's Classification tab, create a document profile for the Siebel metadata fields, as shown in Figure 2-2. For details, see the section on document profiles in Oracle Fusion Middleware Managing Oracle WebCenter Enterprise Capture.

Figure 2-2 WebCenter Enterprise Capture, Document Profile

Note:
Typically, you would not select the Siebel identifier field (xsiebelContact, for example) for display to users. If you choose to display it, lock it under the metadata settings to prevent users from changing the value.

4. On the Capture tab, create a client profile, as shown in Figure 2-3. Later, you associate this client profile with one or more document classifications, so that when a user selects a classification, the associated client profile's settings are used. For details, see the section on client profiles in Oracle Fusion Middleware Managing Oracle WebCenter Enterprise Capture.

1. On the General Settings train stop, select 2 - Capture and Index in the Profile Type field. This capture type includes indexing, and scans or imports pages into a single document in a batch. Specify a profile name and batch prefix for the client profile.

2. On the Document Indexing Settings train stop, select the Siebel document profile you created in step 3. You can optionally select the database lookups and choice lists that you created in the Metadata tab.

3. Click Submit to save the client profile.

Figure 2-3 WebCenter Enterprise Capture, Client Profile

5. On the Commit tab, create an Oracle WebCenter Content commit profile to commit the scanned or imported documents to the Content Server when users release a completed batch. See Figure 2-4.
This commit profile specifies how to connect to the Content Server, and how the Siebel and Capture values are passed to the Content Server. For information about creating Oracle WebCenter Content commit profiles, see the section on committing profiles in Oracle Fusion Middleware Managing Oracle WebCenter Enterprise Capture.

1. Select WebCenter Content from the Commit driver drop-down list.

2. On the Login tab, specify settings for logging in to the Content Server instance. (The other tabs become active after you log in.)

3. On the Check-In tab, specify where to make documents visible, how to name documents and assign Type, Security Group, and Account metadata values.

4. On the Field Mappings tab, specify how to write Capture metadata values to the Content Server fields.

Note:
You must map the Siebel entity field you created in step b, as it is required to attach the new Content Server document to the Siebel record.

5. On the Options tab, specify additional settings.

Figure 2-4 WebCenter Enterprise Capture, Field Mappings for a Content Commit Profile

2.4.3 Configure Content Server for WebCenter Enterprise Capture via the Adapter

Follow these steps to configure attachment scanning on the Content Server side:

1. On Content Server, edit the following configuration variables for Oracle WebCenter Enterprise Capture, if you have not done so. See Section 2.2.4.

- ODCURLPath=http://capture_host:port/dc-client

- ODDCScanAction=ODDC Scan Action

- AdapterAppScanBtnVisible=true

2. Restart Content Server.

3. On the Content Server, configure document classification and scan types.

1. From the Administration tray in the Content Server, click the Admin Applets link.

2. Select the Configuration Manager applet. The Configuration Manager is displayed.

3. Click the Views tab, select DocClassView from the alphabetical list, and click Edit Values.

4. In the Edit Values dialog box, click Add and specify the document classification and the corresponding client profile. Note that documentClassification entries must be unique, but a client profile can be used multiple times. Click Close when done.

5. From the Options menu, select Publish schema to publish the data.

2.4.4 Test the WebCenter Enterprise Capture Via Siebel Adapter Configuration

Follow these steps to test the configuration as an end-user. For details about scanning using Oracle WebCenter Enterprise Capture as an end-user, see Oracle Fusion Middleware Using Oracle WebCenter Enterprise Capture:

1. Refresh the Managed Attachments IFrame results page. You should see a Scan button beside the New button.

2. Click Scan. On the Scan Document page, select a document classification and security group, then click Scan Document. The Oracle WebCenter Enterprise Capture client launches.
Notice that the URL reflects the settings you specified to run the client. It also passes the client profile, scan action (1 = Scan and 2 = Import), and metadata data consisting of the Siebel entity and its value (for example, xsiebelContact=1LS-AF98).

3. Within the Oracle WebCenter Enterprise Capture client, review, index, and release the document's batch.

4. Return to the Managed Attachments IFrame and click Refresh. The newly scanned document or imported scanned file should be displayed in the list. (It may take a few minutes to be displayed.)

2.5 Configuring Oracle Distributed Document Capture

This section covers the following topics:

- Section 2.5.1, "About Document Scanning Using Oracle Distributed Document Capture"

- Section 2.5.2, "Configure Oracle Distributed Document Capture For the Siebel Adapter"

- Section 2.5.3, "Configure Content Server for Distributed Document Capture Via the Adapter"

- Section 2.5.4, "Test the Distributed Document Capture Via Siebel Adapter Configuration"

Note:
This section describes scanning via Managed Attachments using Oracle Distributed Document Capture 10g. For information about scanning using Oracle WebCenter Enterprise Capture 11g, see Section 2.4.

2.5.1 About Document Scanning Using Oracle Distributed Document Capture

The Oracle Distributed Document Capture application allows an application such as the Siebel Adapter to direct it to scan a document and pass in document index values. This allows users to scan documents or import scanned image files from the Managed Attachments IFrame and attach them to the selected Siebel record.

When configured for the Siebel Adapter, document scanning works like this:

1. A Scan button is added to the Managed Attachments IFrame. The user clicks the button, and selects a document classification, which is assigned to an Oracle Distributed Document Capture scan profile. For example, the user might select a classification of Identity Documents to scan a photocopy of a driver's license or passport. (An Oracle Distributed Document Capture scan profile specifies scanning, importing, and indexing settings.)

2. When the user clicks Scan Document, Oracle Distributed Document Capture's remote client launches in a new window, automatically authenticates and logs in the user, and passes in parameters such as the scan profile to be used and the Siebel entity value for later attachment.

3. Within the Oracle Distributed Document Capture client, the user reviews the document, makes changes as needed, completes any index fields configured in the scan profile, then sends the batch. Sending the batch commits the new document to Content Server using an Oracle 11g UCM commit profile specified for the scan profile. (A Capture UCM commit profile specifies connection information and field mappings between Capture and Content Server metadata fields.)

4. Upon successful sending, the user returns to the Managed Attachments IFrame and refreshes the display to view the newly scanned document or imported scanned image file.

2.5.2 Configure Oracle Distributed Document Capture For the Siebel Adapter

Follow these steps to configure attachment scanning on the Oracle Distributed Document Capture side:

1. Ensure that Oracle Distributed Document Capture is set for automatic login (optional).
On the System Settings tab of the Distributed Document Capture Server Configuration application shown in Figure 2-5, select Web Server Authenticated Access from the Authentication Methods options. This allows the client to launch automatically without users needing to log in. For details, see the section on authentication in the Installation Guide for Oracle Distributed Document Capture.

Figure 2-5 Distributed Document Capture Server Configuration, System Settings Tab

2. In Capture Administration, add index fields to a selected file cabinet for capturing values for new documents, as shown in Figure 2-6. For details, see the section on Capture Administration in the Administrator's Guide for Oracle Distributed Document Capture:

1. Create index fields for values you want saved with attached documents on the Content Server. For example, you might configure Doc Type and Security Group pick-list index fields for users to select from standard settings.

2. Create an index field to contain the Siebel entity value. Name the field based on the Siebel entity you are using, listed in the following table:

Identifier

xsiebelAcct

xsiebelActivity

xsiebelArrest

xsiebelAsset

xsiebelCallRpt

xsiebelCase

xsiebelClaim

xsiebelContact

xsiebelEvidence

xsiebelGroup

xsiebelIncident

xsiebelLead

xsiebelOffense

xsiebelOpprnty

xsiebelOrder

xsiebelProject

xsiebelQuote

xsiebelSuspect

xsiebelSvcReq

Figure 2-6 Capture Administration, Index Fields

3. In Oracle Distributed Document Capture's Profile Administration, create a scan profile, as shown in Figure 2-7. Later, you associate this scan profile with one or more document classifications, so that when a user selects a classification, the associated scan profile's settings are used. For details, see the section on scan profiles in the Administrator's Guide for Oracle Distributed Document Capture.

1. On the General pane, select 2 - Scan and Index Documents in the Scanning Type field. This scanning type includes indexing, and scans or imports pages into a single document in a batch. Specify a file cabinet and batch prefix.

2. On the Document Indexing pane, move all fields you want displayed to users to the Selected Fields box.

Note:
Typically, you would not select the Siebel identifier field (xsiebelContact, for example) for display to users. If you choose to display it, lock it on the Field Properties pane to prevent users from changing the value.

3. On the Field Properties, Auto Populate, and Database Lookup panes, configure any pick-lists, database lookups, or autopopulating needed for indexing. Save the scan profile.

Figure 2-7 Scan Profiles, Oracle Distributed Document Capture Profile Administration

4. In Capture Administration, create an Oracle UCM 11g commit profile to commit the scanned or imported documents to Content Server when users send a completed batch. See Figure 2-8.
This commit profile specifies how to connect to the Content Server, and how the Siebel and Capture values are passed to the Content Server. For information about creating Oracle UCM 11g commit profiles, see the section on committing profiles in the Administrator's Guide for Oracle Distributed Document Capture:

1. Select Oracle UCM 11g Commit Driver in the Commit Driver field. Click Configure adjacent to the Commit Driver field.

2. On the Login tab, specify settings for logging in to the Content Server instance. (The other tabs become active after you log in.)

3. On the Check-In tab, specify how to name documents and assign Type, Security Group, and Account values.

4. On the Field Mappings tab, map Capture fields to Content Server fields.

Note:
You must map the Siebel entity field you created in step b, as it is required to attach the new Content Server document to the Siebel record.

5. Activate the Siebel-UCM commit profile.

Figure 2-8 Capture Administration, Oracle UCM 11g Commit Settings

2.5.3 Configure Content Server for Distributed Document Capture Via the Adapter

Follow these steps to configure attachment scanning on the Content Server side:

1. On Content Server, edit the following configuration variables for Oracle Distributed Document Capture, if you have not done so. See Section 2.2.4.

- ODDCURLPath=http://ODDC_host/ODDC_webcapture_address

- ODDCScanAction=ODDC Scan Action

- AdapterAppScanBtnVisible=true

2. Restart Content Server.

3. On Content Server, configure document classification and scan types.

1. From the Administration tray in Content Server, click the Admin Applets link.

2. Select the Configuration Manager applet. The Configuration Manager is displayed.

3. Click the Views tab, select DocClassView from the alphabetical list, and click Edit Values.

4. In the Edit Values screen, click Add and add document classification and their corresponding scan profile. Note that the documentClassification entries must be unique, but a scan profile can be used multiple times. Click Close when done.

5. From the Options menu, select Publish schema to publish the data.

2.5.4 Test the Distributed Document Capture Via Siebel Adapter Configuration

Follow these steps to test the configuration as an end-user. For details about scanning using Oracle Distributed Document Capture as an end-user, see the Oracle Distributed Document Capture User's Guide:

1. Refresh the Managed Attachments IFrame results page. You should see a Scan button beside the New button.

2. Click Scan. In the Scan Document page, select a document classification and click Scan Document. The Oracle Distributed Document Capture client launches.
Notice that the URL reflects the settings you specified to run the client. It also passes the scan profile, scan action (1 = Scan and 2 = Import), and index data consisting of the Siebel entity and its value (for example, xsiebelContact=1LS-AF98).

3. Within the Oracle Distributed Document Capture client, review, index, and send the document's batch.

4. Return to the Managed Attachments IFrame and click Refresh page. The newly scanned document or imported scanned image file should be displayed in the list. (It may take a few minutes to be displayed.)

2.6 Passing Extra Metadata Parameters From Siebel to Content Server

As part of an adapter configuration, you can pass one or more metadata values from Siebel to Content Server for populating New and Scan button URLs within the Siebel IFrame. For example, whenever a user checks in a new document using the New or Scan button, you might pass a Siebel account name for use in check-in.

Here's how it works:

- To pass values, you need a Siebel field and a Content Server metadata field.

- Two configuration variables are provided: one for new documents and the other for scanning documents. You set these variables to the metadata field(s) to populate on the Content Server side.

- You add arguments to the symbolic URL (with the prefix extra added to the variable name) that link the Siebel and Content Server fields, so that they are appended to the New or Scan button URL. When the IFrame is displayed, the application searches the URL for extra parameter variables and uses their assigned values to populate New or Scan button actions.

- Depending on configuration, extra values being passed may be visible or hidden from users checking in or scanning documents. For example, you might hide an account number, but for another value, you might populate a dropdown field and allow users to change the value.

Configuring extra metadata parameters involves the following main steps:

- Section 2.6.1, "Configure Content Server for Extra Parameters"

- Section 2.6.2, "Configure Siebel for Extra Parameters"

2.6.1 Configure Content Server for Extra Parameters

Follow these steps to configure extra parameters on the Content Server side:

1. Ensure that the SiebelSearchExtraParams component is enabled. See Section 2.2.3.

2. Set the extraSiebelDocParams and extraSiebelScanParams configuration variables.
Specify the Content Server field or fields to populate. Define extraSiebelDocParams to pass values using the New button, and extraSiebelScanParams to pass values using the Scan button. For information about configuration variables, see Section 2.2.4.

For example, to populate the Content Server Account metadata field for new and scanned documents, specify the following:

- extraSiebelDocParams=dDocAccount

- extraSiebelScanParams=dDocAccount

Note:
If specifying multiple Content Server fields for a variable, separate them with a comma. For example:
extraSiebelDocParams=dDocAccount,xsiebelOrder

extraSiebelScanParams=dDocAccount,dDocType

3. Update profiles as needed to accommodate the passed values (without the extra prefix).

- If passing values using the New button, update the Content Server content profile to display the metadata field you specified, if needed.

- If passing values using the Scan button, update the client profile to display the index field, if desired. (The index field must exist for the workspace being used.) In the commit profile, map the index field to the appropriate Content Server metadata field.

2.6.2 Configure Siebel for Extra Parameters

Follow these steps to configure extra parameters on the Siebel side:

1. Add a Siebel field to hold the value to pass. For example, you might add a field called UcmAccount to the Contact business component, as shown in the following figure.

2. On the symbolic URL, add an argument for the field you created in step 1, including the extra prefix (extradDocAccount in the following example, which is the Content Server metadata variable name of dDocAccount with the extra prefix).

3. Compile the business component.

2.7 Customizing the Siebel Adapter IFrame Display

You can customize the Siebel Adapter in the ways described in the following sections:

- Section 2.7.1, "Add Custom Buttons"

- Section 2.7.2, "Dynamically Change the Display Mode"

- Section 2.7.3, "Change Display Colors"

2.7.1 Add Custom Buttons

Follow these steps to add a custom button to the IFrame to implement an additional function:

1. Using Component Manager, create a custom component. Create an include resource that overrides the following resource includes:

- js_custom_siebel_functions

- custom_configurable_btn_bar

- js_custom_configurable_btn_bar

2. After applying these resource includes, enable the component in Content Server.

js_custom_siebel_functions

The super.js_custom_siebel_functions must be included for the main button bar to display. This include adds a javascript listener attached to the custom button. The YAHOO.oracle.ucm.adapter.extension is the YUI namespace which helps in detecting and preventing name conflicts.

<@dynamichtml js_custom_siebel_functions@>
<$include super.js_custom_siebel_functions$>

<script type="text/javascript">
//namespace definition
YAHOO.namespace("YAHOO.oracle.ucm.adapter.extension");

/**
* Function for custom functionality added to the existing adapter.
*
*/
YAHOO.oracle.ucm.adapter.extension.customFunctionListener=function(){
//custom code goes in here
alert("You have your custom functionality running");
};
</script>
<@end@>

custom_configurable_btn_bar

The super include must be present. This code makes the button appear in the user interface.

<@dynamichtml custom_configurable_btn_bar@>
<$include super.custom_configurable_btn_bar$>
<a id="customBtn"
href="http://hostname/pages/editpage.action#" >Custom Button</a>&nbsp;
<@end@>

js_custom_configurable_btn_bar

This code associates the listener function with the button code.

<@dynamichtml js_custom_configurable_btn_bar@>
<$include super.js_custom_configurable_btn_bar$>

YAHOO.util.Event.addListener("customBtn","click",YAHOO.oracle.ucm.adapter.extension.customFunctionListener);
<@end@>

2.7.2 Dynamically Change the Display Mode

As an option, you can configure a special display mode that dynamically overrides the default display configuration settings, hiding one or more buttons and disabling one or more icons. For example, when users are viewing a specific Siebel record type, such as Orders, you might hide the New and Scan buttons to prevent them from adding new attachments to orders, and disable the Edit icon so they can view but not edit order related attachments.

Here's how it works:

- By default, no dynamic display mode is configured. Under normal default settings, buttons in the IFrame are displayed according to their configuration variable settings (see Section 2.2.4). Columns are displayed according to the user's field configuration settings, and if columns are displayed, their icons are always functional.

- A parameter called SiebelDisplayMode sets the alternate display mode's combination of disabled buttons and icons. When set, this parameter overrides the other configuration variables (for example, AdapterAppCheckinBtn=true). The SiebelDisplayMode parameter is an integer that you calculate. During display, the integer is translated to dynamically determine the button and icon status.

- You activate the alternate dynamic display mode by configuring a secondary symbolic URL for the IFrame and specifying the SiebelDisplayMode parameter within it. Then, for business objects that require the alternate display mode, you change the symbolic URL to point to the secondary symbolic URL.

2.7.2.1 Calculate the SiebelDisplayMode Integer

Each button and icon is assigned an integer value, as shown in Figure 2-9 and listed in Table 2-3. Calculate the display mode integer by adding the integer value of each button and icon to be disabled.

For example, to disable the Edit and Properties icons and hide the New, Scan, Detach, and Configure buttons, calculate the SiebelDisplayMode value as follows:

2^1 + 2^2 + 2^3 + 2^4 + 2^5 + 2^8 = 318

Note:
Setting the SiebelDisplayMode value to 0 displays all buttons and enables all icons, overriding any specified values in the config.cfg file.

Figure 2-9 Integer Values for Calculating a Display Mode Integer

Table 2-3 Integer Values for Calculating a Display Mode Integer

Button or Icon

Integer Value

Info Icon

20

Edit Icon

21

Properties Icon

22

New Button

23

Scan Button

24

Detach Button

25

Refresh Button

26

Advanced Search Button

27

Configure Button

28

Note:
To hide custom buttons, see Section 2.7.2.3.

2.7.2.2 Configure Siebel for Special Display Mode

After calculating a display mode integer, as described in Section 2.7.2.1 follow these steps to configure the alternate display mode:

1. In the Siebel Web Client, configure a secondary symbolic URL for the IFrame.

1. Enter a new name for the URL (for example, UcmServUrl2) and select the same settings as the original URL. For more information, see Section 2.3.4.

2. Include an additional argument that specifies the SiebelDisplayMode parameter as shown in the table and the illustration that follows:

Name

Required Argument

Argument Type

Argument Value

Append as Argument

Substitute in Text

Sequence #

SiebelDisplayMode

N

Constant

Integer corresponding to display mode

Y

N

12

2. For business objects that require the alternate display mode, change the symbolic URL to point to the secondary symbolic URL.

2.7.2.3 Calculate Values for Custom Buttons

If you have added custom buttons to the IFrame (as described in Section 2.7.1) and want to hide them in an alternate display mode, include their values in the integer calculation.

The following resource adds the buttons (custombtn1 and custombtn2) to the EnumObj javascript object and the framework calculates their values at run time:

js_custom_button_visibility_handler

<@dynamichtml js_custom_button_visibility_handler@>
<$include super.js_custom_button_visibility_handler$>
NAME_ENUM.CUSTOMBTN1="CUSTOMBTN1",
NAME_ENUM.CUSTOMBTN2="CUSTOMBTN2",
EnumObj.add(NAME_ENUM.CUSTOMBTN1,"customBtn1",IMG_ENUM.BUTTON);
EnumObj.add(NAME_ENUM.CUSTOMBTN2,"customBtn2",IMG_ENUM.BUTTON);
<@end@>

The following illustration displays the custom buttons and their calculated values:

2.7.3 Change Display Colors

To change the background, highlighted row, or hover row in IFrame, create a component and override the following resources:

- css_adapter_background_styling

- css_adapter_row_styling

css_adapter_background_styling

In the following lines, specify another background color for the adapterBackgroundColor idoc variable (hexidecimal code recommended). The super include line must be present.

<@dynamichtml css_adapter_background_styling@>
<$adapterBackgroundColor="#346a2a"$>
<$include super.css_adapter_background_styling$>
<@end@>

css_adapter_row_styling

In the following lines, change the row colors by specifying different colors for the selectedRowColor and highlightedRowColor idoc variables. The super include line must be present.

<@dynamichtml css_adapter_row_styling@>
<$selectedRowColor="#eac5a6"$>
<$highlightedRowColor="#bdc1a3"$>
<$include super.css_adapter_row_styling$>
<@end@>

2.8 Uninstalling the Adapter

Follow the steps listed in these sections to uninstall the adapter:

- Section 2.8.1, "Disable Adapter Components on Content Server"

- Section 2.8.2, "Uninstall Siebel Components"

2.8.1 Disable Adapter Components on Content Server

Follow these steps to disable the following adapter components on the Content Server:

1. Log in to Content Server as an administrator.

2. Select Admin Server from the Administration menu.
The Component Manager page is displayed.

3. Scroll to the Integration components section.

4. Deselect the Siebel adapter components to disable them.

- SiebelEcmIntegration

- SiebelIntegrationSearchDisplay

- SiebelSearchExtension

- SiebelSearchExtraParams

- SiebelFilter

(For details about these components, see Section 2.2.3)

5. Click Update.

6. Restart Content Server.

Note:
For information about restarting methods, see the section on starting, stopping, and restarting Content Server in the Oracle Fusion Middleware Administering Oracle WebCenter Content.

2.8.2 Uninstall Siebel Components

Uninstalling Siebel adapter components includes activating the default Siebel File Attachment Applets that were disabled during adapter configuration, and deactivating the applets the SIF file added for the adapter configuration. See Section A.2.

A Siebel Object Locking

This appendix lists Siebel objects locked during adapter configuration and provides instructions for activating or deactivating them.

This appendix includes the following sections:

- Section A.1, "Objects Locked During SIF Import and Project Locking Process" lists the Siebel objects (Projects, Applets, Views, and Business Components) locked during Siebel configuration (see Section 2.3). If you encounter issues when importing the SIF file and locking the Siebel Projects (see Section 2.3.1), you can lock Siebel objects individually.

- Section A.2, "Activating or Deactivating Siebel Objects" lists instructions in activating or deactivating Siebel applets. Importing the SIF file deactivates certain Siebel applets.

A.1 Objects Locked During SIF Import and Project Locking Process

Importing the SIF file and following the Siebel project locking process described in Section 2.3.1 locks the objects detailed in the following sections:

- Section A.1.1, "Projects Locked"

- Section A.1.2, "Applets Locked"

- Section A.1.3, "Views Locked"

- Section A.1.4, "Business Components Locked"

A.1.1 Projects Locked

Table A-1 Projects Locked (SIA and SEA)

Projects

SIA

SEA

Account

X

X

Account SSE

X

X

Activity

X

X

Activity SSE

X

X

Asset Management

X

X

Contact

X

X

Contact SSE

X

X

ERM Unified Help Desk

X

X

FINS Call Reports

X

X

FINS Call Reports2

X

X

FINS Call Reports SSE

X

X

FINS INS Claims

X

X

FINS INS Claims Appraisals/Bills/Attachments

X

X

Oppty

X

X

Oppty SSE

X

X

Order Entry

X

X

PS Project Management

X

X

PS Project Management SSE

X

X

PUB Case

X

PUB Evidence

X

PUB HLS Incident

X

PUB HLS Physical Terrorism

X

PUB Lead

X

Quote

X

X

Quote UI

X

X

Service

X

X

Service SSV

X

X

VERT CUT Common

X

X

A.1.2 Applets Locked

Table A-2 Applets Locked

Applets

SIA

SEA

Activity Form Applet

X

Agent Service Request Detail Applet

X

X

Asset Mgmt - Asset Detail Applet

X

X

Asset Mgmt - Asset Detail Applet - Header

X

X

Contact Form Applet

X

X

FINCORP Call Report Form Applet (Short)

X

X

HLS Case Form Applet

X

HLS Group Form Applet

X

HLS Suspect Form Applet - Header

X

INS Claims Form Applet

X

X

Opportunity Form Applet - Child

X

X

Order Entry - Order Form Applet Dashboard

X

X

Order Entry - Order Form Applet Dashboard (Sales)

X

X

Project Entry Applet

X

X

PUB Arrest List Applet

X

PUB Evidence Form Applet

X

PUB HLS Incident Form Applet - Header

X

PUB Lead Form Applet

X

PUB Offense List Applet

X

Quote Form Applet

X

X

Service Request Detail Applet

X

X

SIS Account Entry Applet

X

X

A.1.3 Views Locked

Table A-3 Views Locked

Views

SIA

SEA

Account Attachment View

X

X

Activity Attachment View

X

X

Agent Service Request detail view w/attachments

X

X

Asset Mgmt - Asset Attachment View

X

X

Contact Attachment View

X

X

FINCORP Call Report - Attachments

X

X

HLS Case Attachment View

X

HLS Groups Attachment View

X

HLS Suspect Attachment View

X

INS Claims Attachments View

X

X

Internal Asset Mgmt - Asset Attachment View

X

X

Opportunity Attachment View

X

X

Order Entry - Attachments View

X

X

Order Entry - Attachments View (Sales)

X

X

Project Attachment View

X

X

PUB Evidence Attachment View

X

PUB HLS Incident Attachment View

X

PUB Incident Arrest Attachments View

X

PUB Incident Offense Attachments View

X

PUB Lead Attachment View

X

Quote Attachment View

X

X

Service Request detail view w/attachments

X

X

A.1.4 Business Components Locked

Table A-4 Business Components Locked

Business Components

SIA

SEA

Account

X

X

Action

X

X

Asset Mgmt - Asset

X

X

Contact

X

X

FINCORP Call Report

X

X

HLS Case

X

HLS Group

X

HLS Suspect

X

INS Claims

X

X

Opportunity

X

X

Order Entry - Orders

X

X

Project

X

X

PUB Evidence

X

PUB Arrest

X

PUB HLS Incident

X

PUB Offense

X

PUB Lead

X

Quote

X

X

Service Request

X

X

A.2 Activating or Deactivating Siebel Objects

Importing the SIF file deactivates certain Siebel applets (see Table A-1). If for some reason you need them to reactivate them, follow these steps:

1. In the Object Explorer, identify a View that holds the Managed Attachments Applet from the Web client. (Identify a View by selecting About View from the Help menu.)

2. Expand the View and select View Web Template Item. The list of Applets contained in the View is displayed.

3. Select an Applet from Table A-1 and activate or deactivate as needed.

- Activate an Applet by setting its Inactive Attribute to False.

- Disable an Applet by setting its Inactive Attribute to True.

B Configuring Additional Siebel Objects

To use the Siebel Adapter for Oracle WebCenter Content with additional Siebel entities beyond those automatically configured (see Section 1.2), follow the steps in this Appendix. The Siebel Adapter for WebCenter Content uses an IFrame to display Managed Attachments. Before use, an IFrame applet must be created and configured for each business object.

This appendix contains the following topics:

- Section B.1, "Identifying Objects to Lock"

- Section B.2, "Locking Additional Siebel Objects"

- Section B.3, "Adding Fields to the Business Component"

- Section B.4, "Creating an Applet for the IFrame"

- Section B.5, "Modifying Applet View Layout"

- Section B.6, "Inactivating Existing Applet from View"

- Section B.7, "Adding the New Applet to the View"

- Section B.8, "Set IFrame to Refresh When Parent Applet Changed"

- Section B.9, "Compiling the Additional Objects Project"

- Section B.10, "Configuring the IFrame URL in the Siebel Web Client"

- Section B.11, "Testing the Additional Objects Siebel Configuration"

- Section B.12, "Creating a SIF File for Export"

- Section B.13, "Configuring Content Server"

B.1 Identifying Objects to Lock

Prior to modifying Siebel business objects, you must identify and lock those business components, applets, and views affected. To identify what to lock, do the following:

1. Log in to Siebel Web Client with User ID: SADMIN.

2. Select the tab of the business object being modified. For example, select the Agreements tab if modifying a Service Agreement. The object screen is displayed.

3. Select the Attachments tab. A listing of attachments associated with the existing applet is displayed.

4. Select About View from the Web Client Help menu. The About View screen is displayed with information about the view, applets, and business components used for the selected object. For example, if modifying a service agreement object, information on the following items might be displayed:

- Screen: Agreement Screen

- View: Agreement Attachments View

- Business Object: Service Agreement

- Applets: Applet[0]: LS Medical Agreement Detail Applet; Applet[1]: Agreement New Attachment List Applet;

- Business Components: BusComp[0]: Service Agreement; BusComp[1]: Agreement New Attachment;

In this example you are replacing the Agreement New Attachment List Applet (Applet[1]).

5. Note the information and click OK to close the About View screen.

Figure B-1 The About View Screen

B.2 Locking Additional Siebel Objects

Once the appropriate business components, applets, and views have been identified, you must use Siebel Tools to search and determine the associated projects.

1. Log in to Siebel Tools with User ID: SADMIN.

2. Search for the view, applets, and business components that you noted in the About View screen to find the projects associated with each. For example, you may find the following projects associated with a Service Agreement object:

- Srvagree (SSV)

- LS Medical Terms

- Srvagree

3. Search for the projects you found in step 2 by doing the following:

1. Select Project in the Object Explorer and press Ctl+Q to display the query dialog screen.

2. Enter a query string that includes the projects found in step 2 and press Enter. A list of projects is displayed. In this example, the query string would be

Srvagree ?SSV? OR LS Medical Terms OR Manage Attachments?UCM? OR Srvagree

4. Lock each project found in step 2 by selecting the Locked column next to the project name. This locks all objects, views, applets, business components, and screens that are associated with each project. A check mark is displayed in the Locked column when a project is successfully locked.

Figure B-2 Project Listing with Projects Locked

B.3 Adding Fields to the Business Component

After locking all projects associated with the identified business components, applets, and views, you must add fields to the appropriate business component. For example, to add fields to the Srvagree project, do the following:

1. Select Srvagree in the Projects List.

2. Select Field under Business Component in the Object Explorer. The Field List is displayed.

3. Add the following fields:

Name

Calculated

Calculated Value

UcmServUrl

Yes

UcmServUrl

SiebelEntityName

Yes

xsiebelAgreement

QueryText

Yes

[SiebelEntityName]+" <matches> "+"'"+[Id]+"'"

Note:
Ensure that the correct single quote "`" is used in the last part of the QueryText Calculated Value string. It is typically the character on the key to the left of the number 1 key. Also ensure that there is a space on either side of <matches>.

B.4 Creating an Applet for the IFrame

Once fields are added to the business object, you must create an applet for the IFrame. For this example, do the following:

1. From the File Context Menu, select New Object. The New Object Wizard is displayed.

Figure B-3 The New Object Wizard Screen

2. Under the Applets tab, select List Applet and click OK. The New Applet Wizard is displayed.

Figure B-4 The New Applet Wizard Screen

3. Select Manage Attachments (UCM) as the project.

4. Enter a descriptive name. For example, enter Manage Agreement Attachments Applet (UCM).

5. Enter Managed Attachments as the display title.

6. Select Service Agreement as the Business Component the applet is to be based on.

7. Select Admin as the upgrade behavior, then click Next. The Web Layout screen is displayed.

Figure B-5 The Web Layout Screen

8. Select Applet List (Base/Edit List) from the first list of template options and click the arrow to confirm its use, then click Next. The Fields screen is displayed.

Figure B-6 The Fields Screen with Available Fields Section

9. Select UcmServUrl from the Available Fields section and click the arrow to move it to the Selected Fields section and click Next. The Fields screen changes to display the Available Controls section.

Figure B-7 Fields Screen with Available Controls Section

10. Select all controls in the Available Controls section and click the arrow to move them to the Selected Controls section, then click Next.

11. Click Finish. The IFrame applet is created.

B.5 Modifying Applet View Layout

When created, the IFrame applet uses a generic layout. To view and modify the layout, do the following:

1. Right-click on the newly created applet and select Edit Web Layout from the contextual menu. The new applet is displayed using the Web Template (base) layout.

2. Expand Applet in the Object Explorer then expand List and select List Column. The List Columns screen is displayed showing the UcmServUrl as a list control. The UcmServUrl list control is a place holder for the IFrame.

3. In the Field Retrieval Type column, select Symbolic URL as the attribute.

4. In the HTML Type column, select Field as the attribute.

5. Under Applet in the Object Explorer, expand Applet Web Template and select Applet Web Template Item. A screen is displayed listing the available templates in the top section and the available items on the bottom section.

6. Select Base in the top Applet Web Templates section of the screen. The Web Template dialog is displayed.

7. Select Analytics Applet from the Name column and click OK. The Web Template dialog closes.

8. Save all.

9. Confirm the changes have been saved by right-clicking on the applet and selecting Edit Web Layout from the contextual menu. The applet is displayed using the modified layout.

B.6 Inactivating Existing Applet from View

Before you can use the newly created applet, you must inactivate the old applet from the view. To inactivate the old applet, do the following:

1. Search for the old view name. Find the old view's name by selecting About View from the Web Client Help menu. In this example, search for the Agreement Attachments View. The Views screen is displayed.

2. Select the old view in the Views screen.

3. In the Object Explorer, expand View, then expand View Web Template and select View Web Template Item. The View Web Template Items screen is displayed.

4. Select the applet in the View Web Template Items section and enable Inactive.

Note:
If editing the properties directly rather than editing the record, set the inactive attribute to True.

B.7 Adding the New Applet to the View

After inactivating the old applet from the view, follow these steps to add the new applet:

1. In the Object Explorer, expand View, right-click on the view and select Edit Web Layout from the contextual menu. The applet is displayed.

2. Drag and drop the List applet onto the place holder showing the Child applet. A Pick Record dialog asking for the particular list applet is displayed.

3. Select the name of the new applet from the list and click Pick. The new applet is added to the view.

B.8 Set IFrame to Refresh When Parent Applet Changed

By default, the new applet caches information when a parent record is displayed. If the parent record is changed, the information in the applet view does not get refreshed. You must add a browser script to ensure the applet information is refreshed by doing the following:

1. Determine the parent applet of the new Managed Attachments applet by expanding View Web Template under the View section of the Object Explorer and selecting View Web Template Items.

2. In the View Web Template Items screen, right-click on the parent applet and select Edit Browser Scripts from the contextual menu. Events associated with the applet are displayed in the Object Explorer.

3. In the General Declaration, add the following:

var applet;
function refresh()
{
applet.InvokeMethod("ToggleTo");
}

4. In the Applet_Load event, add the following:

function Applet_Load()
{
applet = this;
}

5. In the Applet_ChangeRecord event, add the following:

function Applet_ChangeRecord()
{
setTimeout("refresh()",10);
}

Note:
To activate the browser script you will need to execute the 'genscript' command. Once you have compiled your work to a new SRF and copied the SRF to your server directory, execute the following command (change to match your environment):

genbscript "ENU\siebel.cfg" D:\sea\siebsrvr\WEBMASTER ENU

You then need to restart IIS by restarting the IIS Admin Service from within the Windows Services screen.

B.9 Compiling the Additional Objects Project

To compile the completed project, do the following:

1. From the tools menu, select Compile Projects. The Object Compiler screen is displayed.

2. Select Locked Projects.

3. Verify that the correct repository is selected in the Siebel repository file field. This repository file must exist in the Web Client installation folder.

4. Click Compile. The length of time necessary to compile varies and may be extensive.

B.10 Configuring the IFrame URL in the Siebel Web Client

Follow the procedure detailed in Section 2.3.4.

B.11 Testing the Additional Objects Siebel Configuration

Test the configuration by following the steps in Section 2.3.5.

B.12 Creating a SIF File for Export

After compiling and testing the project, follow these steps to unlock the modified objects and create a new SIF file for export:

1. Unlock all projects locked in Section B.2 and select each object.

2. Right-click on the selected objects and choose Add to Archive from the contextual menu. The Export to Archive File screen is displayed.

3. In the Export to Archive File screen open, right-click on each object to export and select Add to Archive from the contextual menu. Repeat until all objects for export are added to the archive.

4. Enter or browse to a location and enter a name for the exported SIF file in the Archive file field of the Export to Archive File screen and click Save. The SIF file is created in the specified location.

B.13 Configuring Content Server

After completing the necessary Siebel configuration, you must configure Content Server to support the exposed entity. This section has the following topics:

- Section B.13.1, "Adding Content Server Information Fields"

- Section B.13.2, "Adding Rules for Displaying Fields"

- Section B.13.3, "Editing Necessary Content Server Resource and String Files"

B.13.1 Adding Content Server Information Fields

You must add the appropriate information fields to Content Server using the Content Server Configuration Manager applet. To add the appropriate fields, do the following:

1. Log in to Content Server as an administrator.

2. Open the Administration panel and click Admin Applets. The Admin Applets page is displayed.

3. Click Configuration Manager. The Configuration Manager screen is displayed.

4. Ensure that the Information Fields tab is displayed and click Add. The Add Metadata Field Name is displayed.

5. Enter the name of the field being added. Typically the format is siebel followed by the Entity name. For example siebelAgreement.

6. Click OK. The Add Metadata Field 'field_name' is displayed.

7. Ensure that the following options are enabled:

- Placeholder

- Enable on User Interface

- Enable for Search Index

- Enable Option List

8. Modify the Field Caption by adding ww to the beginning of the caption and capitalizing Siebel. For example, siebelAgreement becomes wwSiebelAgreement.

9. Click Configure. The Configure Option List for 'field_name' screen is displayed.

10. Select Multiselect List as the Option List Type.

11. Enable Use view and click OK. The Add Metadata Field 'field_name' screen closes and the Configuration Manager screen is displayed.

B.13.2 Adding Rules for Displaying Fields

To ensure that fields are displayed, you must use Configuration Manager to add rules. To add rules for displaying fields, do the following:

1. With the Configuration Manager screen still displayed, click Rules. The Rules tab is displayed.

2. Select SiebelEntityRule and click Edit. The Edit Rule SiebelEntityRule screen is displayed.

3. Click Fields. The Fields tab is displayed listing the Entities already built.

4. Click Add. The Add Rule Field screen is displayed.

5. Under Field Name, select the name of the field you created in Section B.13.1. For example, wwSiebelAgreement. The newly created field is typically last on the list.

6. Click OK. The Add Rule Field screen closes and the Add Rule Field 'xfieldName' screen is displayed.

7. Click OK. The Add Rule Field 'xfieldName' screen closes and the Configuration Manager screen is displayed.

8. With the Rules tab displayed, select SiebelEntityRuleUpdate.

9. Repeat steps 3 through 7. The relevant fields are now added and displayed.

10. Click OK to close the Configuration Manager screen.

B.13.3 Editing Necessary Content Server Resource and String Files

After adding the information fields to Content Server, you must account for them in the Content Server integ_cfg_tables.htm and ww_strings.htm files. Do the following steps:

1. Open the integ_cfg_tables.htm file in a standard text editor. The integ_cfg_tables.htm file is located in the following directory:
content_server_install_dir/custom/SiebelEcmIntegration/resources

2. Add a row to the end of the DocTagDefList table with a cell for the field name entered in step 5 of Section B.13.2 and the field caption entered in step 8 of the same section. For example:

<tr>
<td>xsiebelAgreement</td>
<td>wwSiebelAgreement</td>
</tr>

3. Open the ww_strings.htm file in a standard text editor. The ww_strings.htm file is located in the following directory:
content_server_install_dir/custom/SiebelEcmIntegration/resources/lang/en

Note:
Only the ww_strings.htm file in the content_server_install_dir/custom/SiebelEcmIntegration/resources/lang/en directory needs to be edited. The change will modify the ww_strings.htm files in the other language directories automatically.

4. Add the field caption information added in 8 of Section B.13.2 to the end of the body section. For example:

<@wwSiebelAgreement=Agreement@>

Note:
Agreement was the Siebel Entity added as an example in this appendix. Ensure that you use the name of the Entity that you added.

5. Restart Content Server. The new Entity is enabled.

Oracle Legal Notices

Copyright Notice

Copyright © 1994-2018, Oracle and/or its affiliates. All rights reserved.

License Restrictions Warranty/Consequential Damages Disclaimer

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

Warranty Disclaimer

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

Restricted Rights Notice

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

Hazardous Applications Notice

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Trademark Notice

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

Third-Party Content, Products, and Services Disclaimer

This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle.

Pre-General Availability Draft Documentation Notice

If this document is in public or private pre-General Availability status:

This documentation is in pre-General Availability status and is intended for demonstration and preliminary use only. It may not be specific to the hardware on which you are using the software. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to this documentation and will not be responsible for any loss, costs, or damages incurred due to the use of this documentation.

Private Pre-General Availability Draft Documentation Notice

If this document is in private pre-General Availability status:

The information contained in this document is for informational sharing purposes only and should be considered in your capacity as a customer advisory board member or pursuant to your pre-General Availability trial agreement only. It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decisions. The development, release, and timing of any features or functionality described in this document remains at the sole discretion of Oracle.

This document in any form, software or printed matter, contains proprietary information that is the exclusive property of Oracle. Your access to and use of this confidential material is subject to the terms and conditions of your Oracle Master Agreement, Oracle License and Services Agreement, Oracle PartnerNetwork Agreement, Oracle distribution agreement, or other license agreement which has been executed by you and Oracle and with which you agree to comply. This document and information contained herein may not be disclosed, copied, reproduced, or distributed to anyone outside Oracle without prior written consent of Oracle. This document is not part of your license agreement nor can it be incorporated into any contractual agreement with Oracle or its subsidiaries or affiliates.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.