Oracle® Fusion Middleware

Creating Templates and Domains Using the Pack and Unpack Commands for WebLogic Server 12.1.3

12c (12.1.3)

E41893-02

August 2015

This document describes how to use the pack command to create WebLogic domain templates and how to use the unpack command to create WebLogic domains in WebLogic Server 12.1.3.

Oracle Fusion Middleware Creating Templates and Domains Using the Pack and Unpack Commands for WebLogic Server 12.1.3, 12c (12.1.3)

E41893-02

Copyright © 2007, 2015, Oracle and/or its affiliates. All rights reserved.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle.

Contents

Preface

- Intended Audience

- Documentation Accessibility

- Related Documents

1 Overview of the Pack and Unpack Commands

- 1.1 Introduction to the Pack Command

- 1.2 Introduction to the Unpack Command

2 pack and unpack Command Reference

- 2.1 The pack Command

- 2.1.1 Files and Directories Included in Domain Templates

- 2.1.2 Porting Security Provider Data to a New Domain

- 2.1.3 Files and Directories Included in Managed Server Templates

- 2.1.4 Node Manager Configuration

- 2.1.5 Syntax of the pack Command

- 2.1.6 Parameters of the pack Command

- 2.1.7 Example for the pack Command

- 2.2 The unpack Command

- 2.2.1 Syntax of the unpack Command

- 2.2.2 Parameters of the unpack Command

- 2.2.3 Example for the unpack Command

3 Creating and Starting a Managed Server on a Remote Machine

- 3.1 Creating a Managed Server Template

- 3.2 Creating a Managed Server on a Remote Machine

- 3.3 Starting Managed Servers on a Remote Machine

Preface

This guide describes how to use the pack and unpack commands for creating WebLogic domains and templates in WebLogic Server 12.1.3.

Intended Audience

This guide is intended for Oracle Fusion Middleware administrators.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

Related Documents

You can access the documents referenced in this guide on Oracle Technology Network at http://www.oracle.com/technology:

- Installing and Configuring Oracle WebLogic Server and Coherence

- Administering Node Manager for Oracle WebLogic Server

- Deploying Applications to Oracle WebLogic Server

- Administering Server Startup and Shutdown for Oracle WebLogic Server

- WebLogic Scripting Tool Command Reference

1 Overview of the Pack and Unpack Commands

This chapter introduces the pack and unpack commands. The pack and unpack commands provide a simple, one-step method for creating WebLogic Server 12.1.3 domains and templates from the command line. The pack and unpack commands are available in the ORACLE_HOME\oracle_common\common\bin directory.

Notes:
You cannot, however, use these commands to customize the contents of your WebLogic domain or template in the same way as with the other tools.
In addition to the pack and unpack commands, you can use the Configuration Wizard, Domain Template Builder, or WebLogic Scripting Tool to create WebLogic domains and templates.

You can create the following types of templates by using the pack command, and then use them in the unpack command to create either a WebLogic domain or a Managed Server domain:

- Domain template: This type of template defines the full set of resources within a WebLogic domain, including infrastructure components, applications, services, security options, and general environment and operating system options. You can use a domain template as the basis for new WebLogic domains.

- Managed Server template: This type of template defines the subset of resources within a WebLogic domain that are required to create a Managed Server domain directory on a remote machine. You can create a Managed Server template by using the pack command, with the -managed=true option.
Subsequently, when you use the Managed Server template with the unpack command, the Managed Server domain directory that is created contains sufficient bootstrap information to start the Managed Server on the remote machine. You can start the Managed Server on the remote machine by using either the Node Manager or customized start scripts created when you unpacked the template on the remote machine.

This chapter includes the following sections:

- Section 1.1, "Introduction to the Pack Command"

- Section 1.2, "Introduction to the Unpack Command"

1.1 Introduction to the Pack Command

The pack command provides an alternative method for creating a template from the command line in one simple step. Though the pack command does not allow you to customize the contents of your template in the same way as the Domain Template Builder, it helps you do the following tasks quickly:

- Create a domain template that contains a snapshot of an entire working WebLogic domain.
You can then use this template as the basis for a new WebLogic domain that you create by using either the unpack command, Configuration Wizard, or WLST.

- Create a Managed Server template that contains a subset of the files in a WebLogic domain that are required to create a Managed Server domain directory hierarchy on a remote machine.
You can then create the Managed Server domain directory on the remote machine by using the unpack command.

1.2 Introduction to the Unpack Command

The unpack command provides a one-step method for creating a WebLogic domain quickly from an existing template by using the default settings defined in the template. When creating a WebLogic domain, unpack does not provide the same customization options as the Configuration Wizard or WLST. If, however, you use the unpack command with a domain template, you can do the following:

- Change the password for the default administrative user defined in the template.

- Add an administrative user when the default administrative user already has a password specified in the template.

- Specify the JDK and start mode for the WebLogic domain.

- Specify an applications directory, if one is supported by the template.

By using unpack, you can also create a Managed Server domain directory based on a Managed Server template created with the pack command. The Managed Server uses the settings defined for the Administration Server; so you cannot change the JDK or the start mode, add administrative users, or change the administrator password.

Note:
You cannot use unpack to extend a WebLogic domain.

2 pack and unpack Command Reference

This chapter describes the purpose, syntax, and parameters of the pack and unpack commands for WebLogic Server 12.1.3.

This chapter includes the following sections:

- Section 2.1, "The pack Command"

- Section 2.2, "The unpack Command"

The commands are located in the ORACLE_HOME/oracle_common/common/bin directory.

2.1 The pack Command

The pack command creates a template (a .jar archive file) that contains a snapshot of either an entire WebLogic domain or a subset of a WebLogic domain. You can use a template that contains a subset of a WebLogic domain to create a Managed Server domain directory hierarchy on a remote machine.

The following sections describe the files and directories that are included in the domain and Managed Server templates that you create by using the pack command.

2.1.1 Files and Directories Included in Domain Templates

All files and directories in the source WebLogic domain are included, with the following exceptions:

- Temporary files that are created when you start a server

- The servers directory

- Files in the security directory that are created automatically when you create the WebLogic domain, such as DefaultAuthenticatorInit.ldift and XACMLRoleMapperInit.ldift

- Persistent file stores, even if they are located with the domain. File stores are excluded whether they are defined for JMS or other file systems. If the file store is located within the domain, an empty file store directory will be created on the target system.

In addition to files within the domain directory, deployment plans located in external directories will be included in the template that is created by pack. These will be copied by unpack to the following standard location in the domain:

domain_home/config/deployments/deployment_name/plan

Note:
Plans already within the domain will not be relocated.

External directories include locations outside of the Oracle home directory, the domain home, and any location defined in the ORACLE_HOME/oracle_common/common/lib/internalpaths.txt file.

If you configured additional security data, such as for users, groups, or roles, through the Oracle WebLogic Server Administration Console or other online tools, the security data is stored in the LDAP server and is not included in the template. You must first export the data and then import it into the target WebLogic domain.

2.1.2 Porting Security Provider Data to a New Domain

Because it is an offline command, the pack command does not export security provider data, such as embedded LDAP data, into a domain template. After using unpack to create the new domain, you must manually port the security provider data to the new domain. To do so:

1. If necessary, start the Administration Server for the original domain and log in to the original domain's Administration Console.

2. Export the data from the original domain as described in "Export data from a security provider" in the Oracle WebLogic Server Administration Console Help.

3. If necessary, start the Administration Server for the new domain and log in to the new domain's Administration Console.

4. Import the data into the new domain as described in "Import data into a security provider" in the Oracle WebLogic Server Administration Console Help.

2.1.3 Files and Directories Included in Managed Server Templates

The following files and directories are included by default:

- All files in the root directory with the following extensions: .cmd, .sh, .xml, .properties, and .ini.

- Any files with the .pem extension defined in the SSL configuration for your WebLogic domain

- All files and subdirectories in the config directory, with the exception of config.xml

- bin directory

- lib directory

The following files and directories are not included in a Managed Server template by default:

- Applications and certain application initialization files

- config.xml

- Temporary files that are created when you start a server

- The servers directory

- Files in the security directory that are created automatically when you create the WebLogic domain, such as DefaultAuthenticatorInit.ldift and XACMLRoleMapperInit.ldift.

You can pack any domain, whether or not it specifies specific names or ports for the servers in the domain. You can then unpack the domain on any machine, but servers that are defined in the config.xml file to use specific machines and ports will not work on other machines. You must therefore unpack the same template on each remote node for all servers to start successfully on their appropriate nodes and machines.

2.1.4 Node Manager Configuration

Node Manager configuration is not preserved by pack and unpack for both managed and non-managed modes. The Node Manager type is always set to PerDomainNodeManager by default in the unpacked domain.

If the Node Manager type in the original domain was CustomLocationNodeManager, when unpacking the domain, you must include the -nodeManagerType and -nodeManagerHome parameters in the unpack command to preserve the configuration.

If the Node Manager type in the original domain was ManualNodeManagerSetup, you must manually reconfigure Node Manager after unpacking the domain on each remote machine.

If a ManualNodeManagerSetup configuration was used for the original domain, the Node Manager configuration information is discarded from the template that is created by pack. When unpacking the domain, specify ManualNodeManagerSetup using the -nodeManagerType parameter. After unpacking the domain, you must manually configure Node Manager.

For information about Node Manager types, see "Default Node Manager Configuration" in Administering Node Manager for Oracle WebLogic Server.

Node Manager credentials, which are stored in config.xml, are copied from the packed domain to the unpacked domain.

2.1.5 Syntax of the pack Command

pack -domain=domain -template=template -template_name="template_name" [-template_author="author"] [-template_desc="description"] [-managed=true|false] [-log=log_file] [-log=log_file] [-log_priority=log_priority]

2.1.6 Parameters of the pack Command

Table 2-1 lists the parameters of the pack command.

Table 2-1 Parameters of the pack Command

Parameter

Required or Optional

Description

-domain=domain

Required

The full or relative path for the WebLogic domain from which the template is to be created.

-template=template

Required

The full or relative path and file name of the template to be created. The template filename must include the .jar extension.

Note: The pack command does not overwrite existing files. If the file name that you specify matches the name of an existing file in the specified folder, the pack command fails.

-template_name="template name"

Required

Descriptive name for the template. Quotes are required only if the value contains spaces.

-template_author="author"

Optional

The name of the author of the template. Quotes are required only if the value contains spaces.

-template_desc="description"

Optional

Description of the template. Quotes are required only if the value contains spaces.

-managed=true|false

Optional

Specifies whether the template is to be used to create Managed Servers on remote machines. The default is false.When this parameter is set to true, a Managed Server template is created that contains a minimal set of files, including SerializedSystemIni.dat and nm_password.properties. It also includes a domain.properties file that is unique to the Managed Server template.Applications and certain application initialization files are not included.The resulting template can be used to create Managed Servers on remote machines.

Note: As of WebLogic Server 12.1.2, you can use the WLST writeTemplate command in online mode. This makes it easier to create or update remote Managed Server domains. For more information, see "writeTemplate" in WebLogic Scripting Tool Command Reference.

-log=log_file

Optional

Name of the log file.

-log_priority=log_priority

Optional

The priority setting for the log file. Use a log4j priority string.

Valid log4j priority strings are debug, info, warn, error, and fatal. The priority string values correspond to the levels defined in the Level class. For more information, see http://logging.apache.org/log4j/.

2.1.7 Example for the pack Command

To create a template JAR file based on an existing WebLogic domain named mydomain that is located in the C:\oracle\user_projects\domains directory, run the following command:

pack -domain=C:\oracle\user_projects\domains\mydomain -template=C:\oracle\user_templates\mydomain.jar -template_name="My WebLogic Domain"

A template file named mydomain.jar is created in the C:\oracle\user_templates directory. The name of the template is My WebLogic Domain.

2.2 The unpack Command

The unpack command creates a full WebLogic domain or a subset of a domain that is used for a Managed Server domain directory on a remote machine.

You should use unpack only with a template that is compatible with your current installation. The current installation binaries must exist on the machine on which you are running the unpack command. The template can be any of the following:

- A domain template that is packaged with your current installation

- A domain template created by using the Domain Template Builder or WLST

- A domain template created by using the pack command

- A Managed Server template created by using the pack command

When you use the unpack command with a domain template, it creates a WebLogic domain containing all of the application and resource files defined in the template. It also creates necessary start scripts, and certain security and configuration files.

Note:
The source domain must have both an administrator user and administrator password defined for the domain. Otherwise, an error is displayed when running the unpack command.

When you use the unpack command with a Managed Server template, it creates a Managed Server domain directory that includes the following:

- A customized start script for each Managed Server in the WebLogic domain

- config_bootstrap.xml file (based on the config.xml in the template)

- nm_password.properties file

- SerializedSystemIni.dat file

An entry for the Managed Server domain directory is also created in the NM_HOME /nodemanager.domains file, where NM_HOME is the node manager home directory for the product installation on the remote machine. The location of this directory depends on the Node Manager type. For more information on Node Manager type and Node Manager home, see Table 2-2.

Note:
By default, application files are not included in a Managed Server template created by using the pack command. If an application in the WebLogic domain from which you created a Managed Server template was deployed by using the external_stage mode, the Managed Server domain directory that you create with the unpack command does not contain any of the externally staged applications. Before you start the Managed Server, you must ensure that it has access to the externally staged application files.
For more information, see the "Controlling Deployment File Copying with Staging Modes" section in the Deploying Applications to Oracle WebLogic Server guide.

2.2.1 Syntax of the unpack Command

unpack [-initialize] -template=template -domain=domain [-user_name=username] [-password=password] [-app_dir=application_directory] [-nodemanager_type=type] [-nodemanager_home=nodemanager_home_directory] [-java_home=java_home_directory] [-server_start_mode=dev|prod] [-overwrite_domain] [-log=log_file] [-log_priority=log_priority]

2.2.2 Parameters of the unpack Command

Table 2-2 lists the parameters that you can use with the unpack command.

Table 2-2 Parameters of the unpack Command

Parameter

Required or Optional

Description

-initialize

Optional

This parameter applies only to WebLogic domains in which Fusion Middleware products are installed.

Note: When setting this parameter to true, ensure that the source database is running. If it is not running, the unpack command will fail.

When this parameter is true and the managed parameter for pack was set to false when the domain was packed, it initializes all config-mapping.xml values in the Service Table and the Oracle Web Services Manager (OWSM) data store regardless of the reprocess attribute setting for the entry in config-mapping.xml.

When this parameter is true and the managed parameter for pack was set to true when the domain was packed, it initializes only those config-mapping.xml values in the Service Table and the Oracle Web Services Manager (OWSM) data store for which the reprocess attribute setting for the entry in config-mapping.xml is set to true.

When this parameter is false, no config-mapping.xml values are initialized.

For information about Service Tables, see "Understanding Service Tables" in Administering Oracle Fusion Middleware.

-template=template

Required

The full or relative path and filename of the template from which the WebLogic domain is to be created.

-domain=domain

Required

The full or relative path of the WebLogic domain to be created.

-user_name=username -password=password

Optional

The username and password for the default administrator as currently defined in the template. This username-password combination is used to boot the Administration Server and connect to it. If you specify a new password for the default administrator, the password is reset to the value specified.

Note: If a password for the default administrator is not defined in the template, you must specify one.

If no administrative users are defined in the template, you can create a new default administrator by specifying the -user_name and -password parameters.

If a default administrator and password are currently defined in the template, you can add a new administrative user by specifying the -user_name and -password parameters.

The value must not include commas, tabs, or any characters in the following list: < > # | & ? ( ) { }. Usernames are case sensitive.

A valid password consists of a string of at least eight case-sensitive characters. The unpack command encrypts the password value.

Note: These parameters are not applicable if you are creating a WebLogic domain using a Managed Server template.

-app_dir=application_directory

Optional

The full path to the directory used to store the applications defined in the template.

This parameter is applicable only if the template supports a separate applications directory.

-nodemanager_type=type

Optional

Sets the Node Manager type for the domain you are creating. Specify one of the following types:

- PerDomainNodeManager—If you specify this type, the Node Manager home is defined within the domain as <domain_name>/nodemanager. The Node Manager for each domain can have a different configuration, as determined by the files in this directory.

- CustomLocationNodeManager—Specify this type if you want the Node Manager configuration files to be created in a specific location. If you specify this type, you must include the nodemanager_home argument to specify the Node Manager home directory. The specified directory must be empty.

- ManualNodeManagerSetup—Specify this type if you want to use an existing Node Manager configuration. If specified, the Node Manager configuration for the domain is ignored, and you must manually configure the Node Manager configuration.

The default value is PerDomainNodeManager.

-nodemanager_home=home

Conditional

If the specified Node Manager type is CustomLocationNodeManager, this argument is required. Enter the full path to the Node Manager location you want to use.

If the specified Node Manager type is not CustomLocationNodeManager, this argument is not required. If included, it is ignored.

-java_home=java_home_directory

Optional

The full path to the Java home directory. When set, this parameter identifies the default JVM used by the Administration Server for the WebLogic domain.

This parameter is not applicable if you are creating a WebLogic domain based on a Managed Server template.

-server_start_mode=dev|prod

Optional

The start mode for the Administration Server: development or production. The default value is dev.

Note: If you want the unpacked domain to run in production mode, you must include this parameter in the unpack command and specify prod. Otherwise the unpacked command will be created in development mode.

This parameter is not applicable if you are creating a WebLogic domain by using a Managed Server template.

If dev mode is specified or if this parameter is omitted, a boot.properties file is created for the domain. If prod mode is specified, a boot.properties file is not created for the domain.

overwrite_domain

Optional

If the specified domain directory already exists and is not empty, no warnings to that effect are displayed, and the files in the directory are automatically overwritten. No attempt is made to merge or preserve local customizations.

Note: If a system error occurs after domain generation starts, the domain directory will be in an unknown state.

-log=log_file

Optional

Name of the log file.

-log_priority=log_priority

Optional

The priority setting for the log file. Use a log4j priority string.

Valid log4j priority strings are debug, info, warn, error, and fatal. The priority string values correspond to the levels defined in the Level class. For more information, see http://logging.apache.org/log4j/.

2.2.3 Example for the unpack Command

To create a WebLogic domain named mynewdomain in the C:\oracle\user_projects\domains directory, by using the mydomain.jar template in the C:\oracle\user_templates directory, run the following command:

unpack -template=C:\oracle\user_templates\mydomain.jar -domain=C:\oracle\user_projects\domains\mynewdomain

3 Creating and Starting a Managed Server on a Remote Machine

This chapter describes how to create and start a Managed Server on a remote machine using the pack and unpack command for WebLogic Server 12.1.3.

In some WebLogic domains, you may want to run a Managed Server on a machine that is remote from the Administration Server for the WebLogic domain. You can do this by performing the following steps:

1. Create a Managed Server template by using the pack command. A Managed Server template, by default, contains only those files that are necessary for creating a Managed Server on a remote machine.
For more information, see Section 3.1, "Creating a Managed Server Template."

2. Create a Managed Server domain directory by copying and unpacking the Managed Server template on a remote machine.
For more information, see Section 3.2, "Creating a Managed Server on a Remote Machine."

3. Start the Managed Server on the remote machine.
For more information, see Section 3.3, "Starting Managed Servers on a Remote Machine."

3.1 Creating a Managed Server Template

You create a Managed Server template by executing the pack command on an existing WebLogic domain that includes the definition of one or more Managed Servers and contains Managed Server definitions in the config.xml file.

1. From the command line on the local machine (that is, the machine that contains the Administration Server and the definition of Managed Servers), navigate to the ORACLE_HOME\oracle_common\common\bin directory.

2. Run the following command:
pack -managed=true -domain=domain -template=template.jar -template_name="template_name"

In this command:

- domain is the full or relative path of the WebLogic domain from which the template is to be created.

- template.jar is the full or relative path of the template, and the filename of the template to be created.

- template_name is a descriptive name for the template, enclosed in quotes.

For example, the following command creates a Managed Server template named mydomain_managed.jar from a WebLogic domain named mydomain.

pack -managed=true -domain=C:\oracle\user_projects\domains\mydomain -template=C:\oracle\user_templates\mydomain_managed.jar -template_name="My Managed Server Domain"

3.2 Creating a Managed Server on a Remote Machine

1. Install WebLogic Server on the machines on which you want to host Managed Servers for the WebLogic domain.

Note:
All WebLogic Server instances within a WebLogic domain must run the same version of the WebLogic Server software. For more information about installing WebLogic Server, see Installing and Configuring Oracle WebLogic Server and Coherence.

2. Establish a session with the remote machine. You may use any valid method, such as telnet, to do so.
The IP address and port number of the remote machine must match the definition of the Managed Servers specified in the Managed Server template.

3. Copy the Managed Server template to the remote machine.

4. On the remote machine, navigate to the ORACLE_HOME\oracle_common\common\bin directory.

5. Run the following command:
unpack -domain=domain -template=template.jar

In this command:

- domain is the full or relative path of the domain to be created.

- template.jar is the full or relative path of the Managed Server template that you copied to the machine in step 3.

For example, the following command creates a WebLogic domain named myManagedDomain.

unpack -domain=C:\oracle\user_projects\domains\myManagedDomain -template=C:\oracle\user_templates\mydomain_managed.jar

3.3 Starting Managed Servers on a Remote Machine

When you create a WebLogic domain directory for Managed Servers by using the unpack command, it contains a customized start script for each Managed Server targeted to the current remote machine.

For example, if you create a WebLogic domain that contains two Managed Servers, my_managed_server1 and my_managed_server2, and you target the servers to machine m1, when you create the Managed Server domain directory on machine m1, four custom start scripts are created: startmy_managed_server1.cmd, startmy_managed_server1.sh, startmy_managed_server2.cmd, and startmy_managed_server2.sh. You can use these scripts to start the corresponding Managed Servers. Alternatively, you can use the startManagedWebLogic script with the required parameters.

1. Start the Administration Server for the WebLogic domain as described in "Starting and Stopping Servers" in Administering Server Startup and Shutdown for Oracle WebLogic Server.

2. On the remote machine, navigate to the directory for the WebLogic domain that you created in Section 3.2, "Creating a Managed Server on a Remote Machine."

3. Start the Managed Server on the remote machine.

- On a Windows system, run one of the following commands at the DOS prompt:
startmy_managed_server

startManagedWebLogic my_managed_server admin-url

- On a UNIX system, run one of the following commands:
./startmy_managed_server.sh

./startManagedWebLogic.sh my_managed_server admin-url

In these commands, my_managed_server is the name of the Managed Server to be started and admin-url is the listen address (host name or IP address) and port number of the machine hosting the Administration Server. For your convenience, the startManagedWebLogic_Readme.txt file provides a list of all the Managed Servers and the admin-url for the WebLogic domain.

Note:
You can also start Managed Servers by using Node Manager. For more information, see Administering Node Manager for Oracle WebLogic Server.

Oracle Legal Notices

Copyright Notice

Copyright © 1994-2018, Oracle and/or its affiliates. All rights reserved.

License Restrictions Warranty/Consequential Damages Disclaimer

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

Warranty Disclaimer

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

Restricted Rights Notice

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

Hazardous Applications Notice

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Trademark Notice

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

Third-Party Content, Products, and Services Disclaimer

This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle.

Pre-General Availability Draft Documentation Notice

If this document is in public or private pre-General Availability status:

This documentation is in pre-General Availability status and is intended for demonstration and preliminary use only. It may not be specific to the hardware on which you are using the software. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to this documentation and will not be responsible for any loss, costs, or damages incurred due to the use of this documentation.

Private Pre-General Availability Draft Documentation Notice

If this document is in private pre-General Availability status:

The information contained in this document is for informational sharing purposes only and should be considered in your capacity as a customer advisory board member or pursuant to your pre-General Availability trial agreement only. It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decisions. The development, release, and timing of any features or functionality described in this document remains at the sole discretion of Oracle.

This document in any form, software or printed matter, contains proprietary information that is the exclusive property of Oracle. Your access to and use of this confidential material is subject to the terms and conditions of your Oracle Master Agreement, Oracle License and Services Agreement, Oracle PartnerNetwork Agreement, Oracle distribution agreement, or other license agreement which has been executed by you and Oracle and with which you agree to comply. This document and information contained herein may not be disclosed, copied, reproduced, or distributed to anyone outside Oracle without prior written consent of Oracle. This document is not part of your license agreement nor can it be incorporated into any contractual agreement with Oracle or its subsidiaries or affiliates.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.