Oracle® Fusion Middleware

Administering the WebLogic Persistent Store

12c (12.2.1)

E60324-02

October 2015

This document describes how to configure and monitor WebLogic Persistent Store. It is a resource for system administrators and operators responsible for implementing a WebLogic Server installation.

Oracle Fusion Middleware Administering the WebLogic Persistent Store, 12c (12.2.1)

E60324-02

Copyright © 2007, 2015, Oracle and/or its affiliates. All rights reserved.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle.

Contents

Preface

- Documentation Accessibility

- Conventions

1 Introduction and Roadmap

- Document Scope and Audience

- Guide to This Document

- Related Documentation

- New and Changed Features in This Release

2 The WebLogic Persistent Store

- What is a Persistent Store

- Features of the Persistent Store

- High-Performance Throughput and Transactional Support

- Comparing File Stores and JDBC-accessible Stores

- High Availability For Persistent Stores

- Whole Server Migration

- Automatic Service Migration

- High Availability Storage Solutions

- Limitations and Considerations of the Persistent Store

- Additional Requirements When Enabling High Availability for Persistent Store

3 Using the Default Persistent Store

- Using the Default Persistent Store

- Default Store Location

- Example of a Default File Store

4 Using Custom Persistent Stores

- What are Custom File Stores and JDBC Stores

- When to Use a Custom Persistent Store

- Methods of Creating a Custom Persistent Store

- Modifying Custom Persistent Store Parameters

5 Using Custom File Stores

- Creating a Custom (User-Defined) File Store

- Main Steps for Configuring a Custom File Store

- Example of a Custom File Store

- Guidelines for Configuring a Synchronous Write Policy

- Direct-Write-With-Cache Policy

- Direct-Write Policy

- Cache-Flush Policy

- Disabled Policy

6 Using a JDBC Store

- Creating JDBC-accessible Stores

- Using a JDBC TLog Store

- Main Steps for Configuring a JDBC TLOG Store

- Choosing a Data Source

- Example of a JDBC TLOG Store

- Configuration Guidelines

- Additional Considerations

- Server Migration when using a JDBC TLOG Store

- Monitoring a JDBC TLOG Store

- How to Monitor the JDBC TLOG Store Health State

- How to Monitor Transaction Log Store Statistics

- How to Monitor Transaction Log Store Connections

- Security Considerations

- Using a JDBC Store

- Main Steps for Configuring a JDBC Store

- Example of a JDBC Store

- Supported JDBC Drivers

- Creating a JDBC Store Table Using Default and Custom DDL Files

- Creating a JDBC Store Table Using a Custom DDL File

- Enabling Oracle BLOB Record Columns

- Managing JDBC Store Tables

- Using the utils.Schema Utility to Delete a JDBC Store Table

- Guidelines for Configuring a JDBC Store

- Using Prefixes with a JDBC Store

- Recommended JDBC Data Source Settings for JDBC Stores

- Handling JMS Transactions with JDBC Stores

- Enabling I/O Multithreading for JDBC Stores

- Rebuilding the Store Table Index for an Oracle Database

7 Managing the WebLogic Persistent Store

- Administering a Persistent Store

- Store Administration Using a Java Command Line

- Accessing Store Administration Help

- Dumping the Contents of a File Store

- Compacting a File Store

- Store Administration Using WLST

- Accessing Store Administration Help

- Dumping the Contents of a JDBC Store Using WLST

- Compacting a File Store Using WLST

- Secure File Store Data

8 Monitoring the WebLogic Persistent Store

- Monitoring a Persistent Store

- Monitoring Stores

- Monitoring Store Connections

Preface

This preface describes the document accessibility features and conventions used in this guide—Administering the WebLogic Persistent Store.

Documentation Accessibility

For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.

Access to Oracle Support

Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing impaired.

Conventions

The following text conventions are used in this document:

Convention

Meaning

boldface

Boldface type indicates graphical user interface elements associated with an action, or terms defined in text or the glossary.

italic

Italic type indicates book titles, emphasis, or placeholder variables for which you supply particular values.

monospace

Monospace type indicates commands within a paragraph, URLs, code in examples, text that appears on the screen, or text that you enter.

1 Introduction and Roadmap

This section describes the contents and organization of this guide—Administering the WebLogic Persistent Store.

- Document Scope and Audience

- Guide to This Document

- Related Documentation

- New and Changed Features in This Release

Document Scope and Audience

This document describes how you design, configure, and manage WebLogic Server environments. It is a resource for system administrators and operators responsible for implementing a WebLogic Server installation. This document is relevant to all phases of a software project, from development through test and production phases.

It is assumed that the reader is familiar with Java EE and Web technologies, object-oriented programming techniques, and the Java programming language.

Guide to This Document

The document is organized as follows:

- This chapter, Chapter 1, "Introduction and Roadmap" describes the scope of this guide and lists related documentation.

- Chapter 2, "The WebLogic Persistent Store" describes the WebLogic Server execution model and the process of configuring application access to the execute queue.

- Chapter 3, "Using the Default Persistent Store" describes detecting, avoiding, and recovering from overload conditions.

- Chapter 4, "Using Custom Persistent Stores" describes optimizing your WebLogic Server domain for your network.

- Chapter 5, "Using Custom File Stores" describes using WebLogic Server as a Web server.

- Chapter 6, "Using a JDBC Store" describes configuring and monitoring the persistent store, a built-in, high-performance storage solution for WebLogic Server subsystems and services that require persistence.

- Chapter 7, "Managing the WebLogic Persistent Store" describes the WebLogic Server introspection plug-in for Oracle Virtual Assembly Builder, which can be used to examine a single WebLogic domain and the Middleware home directory in which it resides.

- Chapter 8, "Monitoring the WebLogic Persistent Store" describes the WebLogic Server introspection plug-in for Oracle Virtual Assembly Builder, which can be used to examine a single WebLogic domain and the Middleware home directory in which it resides.

Related Documentation

- Understanding Domain Configuration for Oracle WebLogic Server

- Oracle WebLogic Server Administration Console Online Help

New and Changed Features in This Release

The chapter "Using the WebLogic Persistent Store" in Administering Server Environments for Oracle WebLogic Server, that was published in 12.1.3 and earlier versions, has been moved and reorganized in this new book.

For a comprehensive listing of the new WebLogic Server features introduced in this release, see What's New in Oracle WebLogic Server 12.2.1.

2 The WebLogic Persistent Store

This chapter explains how to configure and monitor the WebLogic Server persistent store, which provides a built-in, high-performance storage solution for WebLogic Server subsystems and services that require persistence. It also describes how to configure high availability for JMS service artifacts that use persistent stores.

- What is a Persistent Store

- Features of the Persistent Store

- High-Performance Throughput and Transactional Support

- Comparing File Stores and JDBC-accessible Stores

- High Availability For Persistent Stores

- Limitations and Considerations of the Persistent Store

What is a Persistent Store

The persistent store provides a built-in, high-performance storage solution for WebLogic Server subsystems and services that require persistence. For example, it can store persistent JMS messages or temporarily store messages sent using the Store-and-Forward feature. The persistent store supports persistence to a file-based store or to a JDBC-accessible store in a database.

Table 2-1 defines many of the WebLogic services and subsystems that can create connections to the persistent store. Each subsystem that uses the persistent store specifies a unique connection ID that identifies that subsystem.

Table 2-1 Persistent Store Users

Subsystem/Service

What It Stores

More Information

Diagnostic Service

Log records, data events, and harvested metrics.

"Understanding WLDF Configuration" in Configuring and Using the Diagnostics Framework for Oracle WebLogic Server

JMS Messages

Persistent messages and durable subscribers.

"Understanding the Messaging Models" in Developing JMS Applications for Oracle WebLogic Server

JMS Paging Store

One per JMS server. Paged persistent and non-persistent messages.

"Main Steps for Configuring Basic JMS System Resources" in Administering JMS Resources for Oracle WebLogic Server.

JTA Transaction Log (TLOG)

Information about committed transactions coordinated by the server that may not have been completed. TLOGs can be stored in the default persistent store or a JDBC TLOG store.

- "Managing Transactions" in Developing JTA Applications for Oracle WebLogic Server.

- Using a JDBC TLog Store

Path Service

The mapping of a group of messages to a messaging resource.

"Using the WebLogic Path Service" in Administering JMS Resources for Oracle WebLogic Server

Store-and-Forward (SAF) Service Agents

Messages for a sending SAF agent for retransmission to a receiving SAF agent

"Understanding the Store-and-Forward Service" in Administering the Store-and-Forward Service for Oracle WebLogic Server.

Web Services

Request and response SOAP messages from an invocation of a reliable WebLogic Web Service.

"Using Reliable SOAP Messaging" in Programming Advanced Features of JAX-RPC Web Services for Oracle WebLogic Server

EJB Timer Services

EJB Timer objects.

"Understanding Enterprise JavaBeans" in Developing Enterprise JavaBeans, Version 2.1, for Oracle WebLogic Server

For more information about the store connection IDs, see Monitoring Store Connections.

Features of the Persistent Store

The key features of the persistent store include:

- Default file store for each server instance that requires no configuration.

- The Default and custom stores are shareable by multiple subsystems, as long as they are all targeted to the same server instance, cluster, or migratable target.

- When configured, a JDBC TLOG store which contains information about committed transactions coordinated by the server that may not have been completed. You can select to persist TLOG information either in the default store or the JDBC TLOG store, depending on your application needs. See Using a JDBC TLog Store.

- High-performance throughput and transactional support.

- Modifiable parameters that let you create customized file stores and JDBC stores.

- Monitoring capabilities for persistent store statistics and open store connections.

- In a clustered environment, the JDBC TLOG store and customized stores can be migrated from an unhealthy server to a backup server, either on the whole-server level or on the service level.

- When targeted to a cluster, the high availability parameters of the persistent store control the distribution and high availability behavior of JMS services. It also eliminates the need to configure Migratable Targets. For more information, see "Simplified JMS Cluster and High Availability Configuration" in Administering JMS Resources for Oracle WebLogic Server.

High-Performance Throughput and Transactional Support

Throughput is the main performance goal of the persistent store. Multiple subsystems can share the same default or custom store, as long as they are all targeted to the same server instance, cluster, or migratable target.

Notes:

- The JDBC TLOG store is only used to persist information about committed transactions coordinated by the server that may not have been completed. It can not be shared by other subsystems.

- The JDBC TLOG store does not allow HA configuration settings.

This is a performance advantage because the persistent store is treated as a single resource by the transaction manager for a particular transaction, even if the transaction involves multiple services that use the same store. For example, if the TLOG, JMS and EJB timers share a file store, and a JMS message and an EJB timer are created in a single transaction, the transaction will be one-phase and incur a single resource write, rather than two-phase, which incurs four resource writes (two on each resource), plus a transaction entry write (on the transaction log).

Both a file store and a JDBC store can survive a process crash or hardware power failure without losing any committed updates. Uncommitted updates may be retained or lost, but in no case will a transaction be left partially complete after a crash.

Comparing File Stores and JDBC-accessible Stores

The following are some similarities and differences between file stores and JDBC-accessible stores:

- The default persistent store can only be a file store. Therefore, a JDBC store cannot be used as a default persistent store.

- Both have the same transaction semantics and guarantees. As with JDBC store writes, file store writes are guaranteed to be persisted to disk and are not simply left in an intermediate (that is, unsafe) cache.

- Both have the same application interface (no difference in application code).

- All things being equal, file stores generally offer better throughput than a JDBC store.

Note:
If a database is running on high-end hardware with very fast disks, and WebLogic Server is running on slower hardware or with slower disks, then you may get better performance from the JDBC store.

- File stores are generally easier to configure and administer, and do not require that WebLogic subsystems depend on any external component.

- File stores generate no network traffic; whereas, JDBC stores generate network traffic if the database is on a different machine from WebLogic Server.

- JDBC stores may make it easier to handle failure recovery since the JDBC interface can access the database from any machine on the same network. With the file store, the disk must be shared or migrated.

- Dynamic Scalability: When custom logical persistent stores are configured and targeted to a cluster, by default, the system automatically creates one physical instance on each of the cluster member, and the instance is named uniquely for monitoring purposes. This allows the store and related JMS artifacts to dynamically scale without the need for individually configuring them on each cluster member. This behavior can be changed such that the system only creates one physical instance and make it high available in the cluster. See "Simplified JMS Cluster and High Availability Configuration" in Administering JMS Resources for Oracle WebLogic Server.

High Availability For Persistent Stores

For high availability, WebLogic Server offers the following two migration options:

- Whole Server Migration

- Automatic Service Migration

Whole Server Migration

A persistent file-based store (default, or custom) can be migrated along with its parent server as part of the "whole server-level" migration feature, which provides both automatic and manual migration at the server level, rather than on the service level. For more information, see "Whole Server Migration" in Administering Clusters for Oracle WebLogic Server. However, file-based stores must be configured on a shared disk that is available to all servers in the cluster.

Automatic Service Migration

File-based stores and JDBC-accessible stores can also be migrated as part of a "service-level" migration for JMS-related services, such as JMS servers, SAF agents, and the path service, which rely on stores to maintain data. WebLogic Server supports automatic service migration in two ways:

- By using simplified JMS cluster configuration: This enables the automatic service migration for both store and all the JMS service artifacts that reference the store. The configuration settings will take effect whenever the store is targeted to a cluster. This model offers enhanced HA capabilities such as automatic failback, dynamic load balancing, and failover. See "Simplified JMS Cluster and High Availability Configuration" in Administering JMS Resources for Oracle WebLogic Server.

- By using Migratable Target configuration: In this model, a migratable target serves as a grouping mechanism for related JMS services, and the entire group is hosted on only one physical server in a cluster.

Note:
For automatic service migration, use simplified JMS cluster configuration instead of the legacy migratable target model.

In both these models, the related hosted services can be automatically migrated from the current unhealthy hosting server to a healthy active server with the help of the Health Monitoring subsystem. In a cluster targeted Store case, when any store instance migrates, all the associated JMS service instances that are referencing that Store instances are also migrated.

In this release, Service-level migration is controlled by targeting the Store to the same cluster as the associated JMS service artifacts, with appropriate high availability parameter settings on the Store. See "Simplified JMS Cluster and High Availability Configuration" in Administering JMS Resources for Oracle WebLogic Server. This type of migration is supported in all the cluster types (configured, dynamic, and mixed) and eliminates the need for Migratable Target configuration. This option also supports automatic failback as well as it controls the service migration of the JMS artifact.As in the previous releases, you can still enable Service-level migration by targeting related JMS services to a Migratable Target, which serves as a grouping of JMS-related services and which is hosted on only one physical server in a cluster. In Migratable Target based configuration, the JMS services hosted by a migratable target can also be manually migrated on demand as part of regularly scheduled server maintenance.

In both the cases, JMS services can be automatically migrated from the current unhealthy hosting server to a healthy active server with the help of the Health Monitoring subsystem. When the migration takes place, all pinned services associated with the Store and are hosted by that Server are also migrated.

For more information on service-level migration, see "Service Migration" in Administering Clusters for Oracle WebLogic Server.

In the cluster or migratable target based model, JMS-related services cannot use the default file store, so you must configure a custom file store or JDBC store and target it to the same migratable target as the JMS server, SAF agent, or path service associated with the store.

For best practices, see Additional Requirements When Enabling High Availability for Persistent Store.

High Availability Storage Solutions

If you have applications that need access to persistent stores that reside on remote machines after the migration of a JMS server or JTA transaction log, then you should implement one of the following highly-available storage solutions:

- File-based stores (default or custom)—Implement a hardware solution, such as a dual-ported SCSI disk or Storage Area Network (SAN) to make a file store available from shareable disks or remote machines.

Note:
If a file store is disconnected and re-connected again, its host server instance must be rebooted to successfully continue sending/receiving persistent JMS messages. For example, if for some reason the file system containing a file store is unmounted and then remounted, attempts to send persistent JMS messages will generate JMS exceptions until the host server is rebooted.

- JDBC-accessible stores—Configure a JDBC store or JDBC TLOG store and use JDBC to access this store, which can be on yet another server. Applications can then take advantage of any high-availability or failover solutions offered by your database vendor. In addition, JDBC stores support GridLink data sources and multi data sources, which provide failover between nodes of a highly available database system, such as Oracle Real Application Clusters (Oracle RAC). For more information, see:

- "Configuring JDBC Multi Data Sources" in Administering JDBC Data Sources for Oracle WebLogic Server

- "Using GridLink Data Sources" in Administering JDBC Data Sources for Oracle WebLogic Server

- Any persistent store—Use high-availability clustering software which provides an integrated, out-of-the-box solution for WebLogic Server-based applications.

Limitations and Considerations of the Persistent Store

The following limitations apply to the persistent store:

- A persistent file store should not be opened simultaneously by two server instances; otherwise, there is no guarantee that the data in the file will not be corrupted. If possible, the persistent store will attempt to return an error in this case, but it will not be possible to detect this condition in every case. It is the responsibility of the administrator to ensure that the persistent store is being used in an environment in which multiple servers will not try to access the same store at the same time. (Two file stores are considered the "same store" if they have the same name and the same directory.)

- Two JDBC stores must not share the same database table, because this will result in data corruption.

- A persistent store may not survive arbitrary corruption. If the disk file is overwritten with arbitrary data, then the results are undefined. The store may return inconsistent data in this case, or even fail to recover at all.

- A file store may return exceptions when its disk is full. However, it will resume normal operation by no longer throwing an exception when disk space has been made available. Also, the data in the persistent store must remain intact as described in the previous points.

- When using MySQL as the backing database for a JDBC store, Oracle recommends using the InnoDB engine because it provides safe writes. If the MyISAM engine is used, data may be lost in some cases.

Additional Requirements When Enabling High Availability for Persistent Store

The following requirements apply when you enable high availability for the persistent store:

- All the related JMS service artifacts that depend on the store must be targeted to the same cluster or migratable target.

- File stores configured for High Availability must also be configured on a shared disk that is available to all the servers in the cluster.

For more information, see See "Simplified JMS Cluster and High Availability Configuration" in Administering JMS Resources for Oracle WebLogic Server.

3 Using the Default Persistent Store

This chapter explains how to configure and monitor the WebLogic Server persistent store, which provides a built-in, high-performance storage solution for WebLogic Server subsystems and services that require persistence.

- Using the Default Persistent Store

- Default Store Location

- Example of a Default File Store

Using the Default Persistent Store

Each server instance, including the Administration Server, has a default persistent store that requires no configuration. The default store is a file-based store that maintains its data in a group of files in a server instance data\store\default directory. A directory for the default store is automatically created if one does not already exist. This default store is available to subsystems that do not require explicit selection of a particular store and function best by using the system's default storage mechanism. For example, a JMS Server with no persistent store configured will use the default store for its Managed Server and will support persistent messaging.

The default store can be configured by directly manipulating DefaultFileStoreMBean parameters. If this MBean is not defined in the domain configuration file, then the configuration subsystem ensures that the DefaultFileStoreMBean always exists with the default values.

Also, the WebLogic Server Administration Console enables you to change the default store parameters, such as its default directory location and Synchronous Write Policy, as described in "Modify the Default Store Settings" in the Oracle WebLogic Server Administration Console Online Help.

Default Store Location

The default store maintains its data in a data\store\default directory inside the servername subdirectory of a domain's root directory

For example, if no directory name is specified for the default file store, it defaults to:

ORACLE_HOME\user_projects\domains\domain-name\servers\server-name\data\store\default

where domainname is the root directory of your domain, typically c:\oracle\user_projects\domains\domainname, which is parallel to the directory in which WebLogic Server program files are stored, typically c:\oracle\wlserver_12.1.

You can, however, specify another location for the default store by directly manipulating the DefaultFileStoreMBean parameters or by using the WebLogic Server Administration Console, as described in "Modify the Default Store Settings" in the Oracle WebLogic Server Administration Console Online Help.

Example of a Default File Store

Here's an example of how a default file store may look in a domain's configuration file, with the default directory location and Synchronous Write Policy settings overridden:

<server
<name>myserver</name>
<default-file-store>
<directory>C:/store</directory>
<synchronous-write-policy>Disabled</synchronous-write-policy>
</default-file-store>
</server>

4 Using Custom Persistent Stores

This chapter explains how to configure and monitor the WebLogic Server persistent store, which provides a built-in, high-performance storage solution for WebLogic Server subsystems and services that require persistence.

- What are Custom File Stores and JDBC Stores

- When to Use a Custom Persistent Store

- Methods of Creating a Custom Persistent Store

- Modifying Custom Persistent Store Parameters

What are Custom File Stores and JDBC Stores

In addition to using the default file store, you can also configure a file store or JDBC store to suit your specific needs. A custom file store, like the default file store, maintains its data in a group of files in a directory. However, you may want to create a custom file store so that the file store's data is persisted to a particular storage device or when you want a JMS service that accesses a file store to be able to migrate with the store to another server member in a cluster. When configuring a file store directory, the directory must be accessible to the server instance on which the file store is located.

A JDBC store can be configured when a relational database is used for storage. A JDBC store enables you to store persistent messages in a standard JDBC-accessible database, which is accessed through a designated JDBC data source. The data is stored in the JDBC store's database table, which has a logical name of WLStore. It is up to the database administrator to configure the database for high availability and performance. JDBC stores also support migratable targets for automatic or manual JMS service migration.

For more information about configuring a persistent store, see When to Use a Custom Persistent Store.

When to Use a Custom Persistent Store

WebLogic Server provides configuration options for creating a custom file store or JDBC-accessible store. For example, you may want to:

- Place a file store's files on a particular device.

- Use a JDBC store rather than a file store for a particular server instance. If you want to persist transaction logs, use a JDBC TLOG store. See Using a JDBC TLog Store.

- Allow all physical stores in a cluster to share the same logical name.

- Logically separate different services to use different files or tables. (This may simplify administration and maintenance at the expense of reduced performance.)

- Migratable JMS-related services cannot use the default persistent store, so you must configure a custom store and target it to the same migratable target as the migratable JMS service. For more information, see "Service Migration" in Administering Clusters for Oracle WebLogic Server.

Methods of Creating a Custom Persistent Store

A user-defined persistent store can be configured in the following ways:

- Use the WebLogic Server Administration Console. To configure a custom file store or JDBC store, see "Configure Persistent Stores" in the Oracle WebLogic Server Administration Console Online Help. To configure a JDBC TLOG store, see "Configure the Transaction Log Store" in the Oracle WebLogic Server Administration Console Online Help.

- Directly edit the configuration file (config.xml) of the server instance that is hosting a persistent store.

- Use the WebLogic Java Management Extensions (JMX) to create persistent stores. JMX is the Java EE solution for monitoring and managing resources on a network. For more information see, Developing Custom Management Utilities Using JMX for Oracle WebLogic Server.

- Use the WebLogic Scripting Tool (WLST) to create persistent stores. WLST is a command-line scripting interface that you use to interact with and configure WebLogic Server instances and domains. For more information, see Understanding the WebLogic Scripting Tool.

- Use the WebLogic Configuration Wizard to change the options of the default persistent store. For detailed information on how to use the Configuration Wizard to configure a persistent store, see "Creating a WebLogic Domain" in Creating WebLogic Domains Using the Configuration Wizard.

Modifying Custom Persistent Store Parameters

Modifying certain custom store configuration options, such as a JDBC store's prefix or a file store's directory, do not necessarily require a server restart if you do the following:

1. Set the targets of any dependent services to null (such as a JMS server that uses the custom store), and then setting the custom store target to null. (Setting a service's target to null implicitly shuts down the service.)

2. Reverse the process by setting the custom store target back to its original value and then setting the dependent resource targets back to their original values.

In cases where the custom store and JMS servers share a migratable target, you can administratively restart the migratable target.

5 Using Custom File Stores

This chapter explains how to configure the custom file stores for WebLogic Server. It includes the following sections:

- Creating a Custom (User-Defined) File Store

- Main Steps for Configuring a Custom File Store

- Example of a Custom File Store

- Guidelines for Configuring a Synchronous Write Policy

Creating a Custom (User-Defined) File Store

The following sections provide an example of a custom file store and configuration guidelines for choosing a synchronous write policy.

To create a custom file store, you can directly modify the default FileStoreMBean parameters. For instructions on using the WebLogic Server Administration Console to create a custom file store, see "Create File Stores" in the Oracle WebLogic Server Administration Console Online Help.

Main Steps for Configuring a Custom File Store

The main steps for creating a custom file store are as follows:

1. Create a directory where the file store's data will be persisted.

2. Create a custom file store and specify the directory location that you created.

3. Associate the custom file store with the subsystem(s) or migratable target that will be accessing it, such as:

- For JMS servers, select the custom file store on the General Configuration page.

- For Store-and-Forward agents, select the custom file store on the General Configuration page.

- For a Path Service, select the custom file store on the General Configuration page.

Example of a Custom File Store

Here's an example of how a custom file store may look in a domain's configuration file with its files kept in a /disk1/jmslog directory.

<file-store>
<name>SampleFileStore</name>
<target>myserver</target>
<directory>/disk1/jmslog</directory>
</file-store>

Table 5-1 briefly describes the file store configuration parameters that can be modified.

Table 5-1 Custom File Store Configuration Options

Option

Required

What It Does

Name

Yes

The name of the file store, which must be unique across all stores in the domain.

Targets

Yes

The server instance, cluster, or migratable target where a file store is targeted. Multiple subsystems can share the same file store, as long as they are all targeted to the same server instance or migratable target.

Note:

- When using a cluster to host a JMS Server, you must target the file store to the same cluster used by the JMS Server. See

- When using migratable targets for JMS services, you must target the file store to the same migratable target used by the JMS service. See "Service Migration" in Administering Clusters for Oracle WebLogic Server.

Directory

Yes

The path name to the directory on the file system where the file store is kept.

Note: When targeting a file store to a migratable target, the store directory must be accessible from all candidate server members in the migratable target. For highest availability, use either a SAN (Storage Area Network) or a dual-ported SCSI disk. See "Service Migration" in Administering Clusters for Oracle WebLogic Server.

Modifying an existing file store's directory does not necessarily require a server restart, as described in Modifying Custom Persistent Store Parameters.

CacheDirectory

No

This setting only applies for the Direct-Write-With-Cache file store synchronous write policy. See Guidelines for Configuring a Synchronous Write Policy..

Logical Name

No

Optionally used with subsystems, like EJBs, when deploying a module to an entire cluster, but also require a different physical store on each server instance in the cluster. In such a configuration, each physical store would have its own name, but all the persistent stores would share the same logical name.

Synchronous Write Policy

No

Defines the IO behavior of a file store including immediate durability of individual write operations. Values are: Direct-Write (default), Direct-Write-With-Cache, Cache-Flush, and Disabled.

For more information, see Guidelines for Configuring a Synchronous Write Policy.

For instructions on configuring a custom file store using the WebLogic Server Administration Console, see "Create File Stores" in the Oracle WebLogic Server Administration Console Online Help.

Guidelines for Configuring a Synchronous Write Policy

There are several Synchronous Write Policies available for file stores. The Synchronous Write Policy determines the behavior of the write operation of the file store. You should select a policy that best suits your environment and meets your needs for runtime performance and data integrity after a possible crash. See "Tuning the WebLogic Persistent Store" in Tuning Performance of Oracle WebLogic Server for more details about tuning and performance specifics of Synchronous Write Policy and other file store options.

Note:
To view a running custom or default file store's synchronous write policy and driver, check the WL-280008 and WL-280009 messages in the server log.

Direct-Write-With-Cache Policy

For most scenarios, Oracle recommends using the Direct-Write-With-Cache policy. When this policy is selected, WebLogic Server writes synchronously to a primary set of files in the location defined by the Directory attribute of the file store configuration using a native I/O wlfileio driver. WebLogic Server also asynchronously writes to a corresponding cache file in the location defined by the CacheDirectory attribute of the file store configuration, which is done implicitly by using OS memory caching the cache file blocks as output buffers for the primary data file. The cache files are used for performance optimizations at runtime and boot time and for recovery. This combination of direct writing with a native file driver and the use of corresponding cache files typically provides the best overall performance with the most safe disk writes.

This option uses approximately twice as much disk space as other policies and stores files in two locations. You may need to consider disk space allocations in these locations and you may need to secure both of these locations.

When configuring file locations with the Direct-Write-With-Cache policy, the location of the CacheDirectory attribute should be a local directory, even when configuring for high availability (Whole Server Migration or Automatic Service Migration). The cache files are used for performance optimizations only. The true persistent storage for messages is defined by the Directory attribute of the file store configuration. Only that directory needs to be available to the migrated WebLogic Server instance or JMS service after migration. The same applies to disaster recovery scenarios: only the files defined in the Directory location need to replicated to the backup site.

Notes:
If the file store native wlfileio driver cannot be loaded, the store automatically runs in an alternate specialized Direct-Write policy mode. To view a running custom or default file store's configured and actual synchronous write policy and driver, examine the server log for WL-280008 and WL-280009 messages.
Certain older versions of Microsoft Windows may incorrectly report storage device synchronous write completion if the Windows default Write Cache Enabled setting is used. This violates the transactional semantics of transactional products (not specific to Oracle), including file stores configured with a Direct-Write (default) or Direct-Write-With-Cache policy, as a system crash or power failure can lead to a loss or a duplication of records/messages. One of the visible symptoms is that this problem may manifest itself in high persistent message/transaction throughput exceeding the physical capabilities of your storage device. You can address the problem by applying a Microsoft supplied patch, disabling the Windows Write Cache Enabled setting, or by using a power-protected storage device. See http://support.microsoft.com/kb/281672 and http://support.microsoft.com/kb/332023.

Direct-Write Policy

When the Direct-Write policy is selected, WebLogic Server writes synchronously to a primary set of files in the location defined by the Directory attribute of the file store configuration using a native I/O wlfileio driver. This policy typically performs slower than the Direct-Write-With-Cache policy, but it uses less disk space and may have fewer environmental considerations to manage. The Direct-Write policy is typically faster than the Cache-Flush policy.

Note:
Certain older versions of Microsoft Windows may incorrectly report storage device synchronous write completion if the Windows default Write Cache Enabled setting is used. This violates the transactional semantics of transactional products (not specific to Oracle), including file stores configured with a Direct-Write (default) or Direct-Write-With-Cache policy, as a system crash or power failure can lead to a loss or a duplication of records/messages. One of the visible symptoms is that this problem may manifest itself in high persistent message/transaction throughput exceeding the physical capabilities of your storage device. You can address the problem by applying a Microsoft supplied patch, disabling the Windows Write Cache Enabled setting, or by using a power-protected storage device. See http://support.microsoft.com/kb/281672 and http://support.microsoft.com/kb/332023.

Cache-Flush Policy

When the Cache-Flush policy is selected, WebLogic Server enables the default file write behavior of the operating system and storage device, which typically includes caching and scheduling file writes, but forces a flush of the cache to disk before completing a transaction. Transactions cannot complete until all of their writes have been flushed down to disk. This policy is reliable and scales well as the number of simultaneous users increases. It is transactionally safe, but tends to provide lower runtime performance than the direct-write policies in typical use cases, except in those cases with large numbers of simultaneous producers or consumers.

Disabled Policy

When the Disabled policy is selected, WebLogic Server relies on the default file write behavior of the operating system and storage device. In most cases, file writes are cached in memory and are scheduled for writing instead of being directly written to disk. The Disabled policy generally improves file store performance, often quite dramatically, but at the expense of possibly losing sent messages or generating duplicate received messages (even if messages are transactional) in the event of an operating system crash or a hardware failure. This is because transactions are complete as soon as their writes are cached in memory, instead of waiting for the writes to successfully reach the disk. Simply shutting down an operating system or killing a WebLogic Server process does not generate these failures, as an OS flushes all outstanding writes under these circumstances during a normal shutdown. Instead, these failures can be emulated by abruptly shutting the power off to a busy server.

6 Using a JDBC Store

This chapter explains how to configure and monitor the WebLogic Server persistent store, which provides a built-in, high-performance storage solution for WebLogic Server subsystems and services that require persistence.

- Creating JDBC-accessible Stores

- Using a JDBC TLog Store

- Using a JDBC Store

Creating JDBC-accessible Stores

The following sections provide information on how to configure and use JDBC-accessible stores:

- JDBC TLog Stores: to persist transaction logs (TLOGs) in a database. See Using a JDBC TLog Store.

- JDBC Stores: to persist WebLogic Server instance services and subsystem information, excluding TLOGs, in a database. See Using a JDBC Store.

Using a JDBC TLog Store

You can configure a JDBC TLOG store to persist transaction logs to a database, which provides the following benefits:

- Leverages replication and HA characteristics of the underlying database.

- Simplifies disaster recovery by allowing the easy synchronization of the state of the database and TLOGs.

- Improved Transaction Recovery service migration as the transaction logs to do not need to be migrated (copied) to a new location.

Main Steps for Configuring a JDBC TLOG Store

The main steps for creating a JDBC TLOG store are as follows:

1. Create a JDBC data source, GridLink data source, or multi data source to interface with the JDBC store. See Choosing a Data Source.

2. Create a JDBC TLOG store and associate it with the JDBC data source, GridLink data source, or multi data source created in Step 1. See "Configure the Transaction Log Store" in the Oracle WebLogic Server Administration Console Online Help.

3. Optional. It is highly recommended that you configure the Prefix option to a unique value for each configured JDBC TLOG store.

4. For high availability, make your data source available to backup servers. See Chapter 6, "Server Migration when using a JDBC TLOG Store."

Choosing a Data Source

You can choose one of the following data source types, depending on your WebLogic Server license and application needs:

- Generic Data Sources—See "Creating a JDBC Data Source" and "Using Connect-Time Failover with Oracle RAC" in Administering JDBC Data Sources for Oracle WebLogic Server.

- GridLink Data Sources—See "Using GridLink Data Sources" in Administering JDBC Data Sources for Oracle WebLogic Server.

- Multi data sources—Backed by a fully replicated, zero-latency database, such as Oracle RAC. See "Configuring JDBC Multi Data Sources" and "Using Multi Data Sources with Oracle RAC" in Administering JDBC Data Sources for Oracle WebLogic Server.

Example of a JDBC TLOG Store

Here's an example of how a JDBC TLOG store may look in the configuration file, using the JDBC data source MyDataSource, and with a logical name specified:

<server>
<transaction-log-jdbc-store>
<data-source>MyDataSource</data-source>
<prefix-name>TLOG_MS1</prefix-name>
<create-table-ddl-file>myDDL/myCreateTable.sql</create-table-ddl-file>
<max-retry-seconds-before-tlog-fail>120</max-retry-seconds-before-tlog-fail>
</transaction-log-jdbc-store>
</server>

Table 6-1 describes the JDBC TLOG store configuration parameters that can be modified.

Table 6-1 JDBC TLOG Store Configuration Options

Option

Required

What It Does

Data Source

Yes

The JDBC data source or multi data source used by this JDBC store to access the store's database table (WLStore). This data source or multi data source must be targeted to the same server instance as the JDBC store.

Note: The JDBC store must use a JDBC data source that uses a non-XA JDBC driver and has Supports Global Transactions disabled. This limitation does not remove the XA capabilities of layered subsystems that use JDBC stores. For example, WebLogic JMS is fully XA-capable regardless of whether it uses a file store or any JDBC store.

Prefix Name

No

The prefix for the JDBC store's table is generally entered in the following format: [[[catalog.]schema.]prefix]

When using multiple JDBC stores, it is required to set this option to a unique value for each configured JDBC store. When no prefix is specified, the JDBC store table name is simply WLStore and the database implicitly determines the schema according the current user of the JDBC connection. Also, two JDBC stores cannot share the same database table. For more information, see Using Prefixes with a JDBC Store.

Modifying an existing JDBC store's prefix does not necessarily require a server restart, as described in Modifying Custom Persistent Store Parameters.

Create Table from DDL File

No

Optionally used with supported DDL (data definition language) files to create the JDBC store's database table (WLStore). This option is ignored when the JDBC store's database table already exists. For more information, see Creating a JDBC Store Table Using Default and Custom DDL Files.

Deletes Per Batch Maximum

Default is 20.

The maximum number of table rows that are deleted per database call.

Inserts Per Batch Maximum

Default is 20.

The maximum number of table rows that are inserted per database call.

Deletes Per Statement Maximum

Default is 20

The maximum number of table rows that are deleted per database call.

MaxRetrySecondsBeforeTLogFail

Default is 300.

The maximum amount of time, in seconds, WebLogic Server tries to recover from a JDBC TLog store failure. If store remains unusable after this period, WebLogic Server set the health state to HEALTH_FAILED. A value of 0 indicates WebLogic Server does not conduct a retry and and immediately sets the health state as HEALTH_FAILED.

MaxRetrySecondsBeforeTXRollback

Default is 60.

The maximum amount of time, in seconds, WebLogic Server waits before trying to recover from a JDBC TLog store failure while processing a transaction. If store remains unusable after this amount of time, WebLogic Server rolls back the affected transaction. A value of 0 indicates WebLogic Server does not conduct a retry and rolls back the transaction immediately. The practical maximum value is a value less than the current value of MaxRetrySecondsBeforeTLogFail.

RetryIntervalSeconds

Default is 5.

The amount of time, in seconds, WebLogic Server waits before attempting to verify the health of the TLOG store after a store failure has occurred.

For instructions on configuring a JDBC TLOG store using the WebLogic Server Administration Console, see "Configure the Transaction Log Store" in the Oracle WebLogic Server Administration Console Online Help.]

Configuration Guidelines

The following section provides guidelines for configuring JDBC TLOG stores.

- Only globally-scoped (not application-scoped) data sources can be targeted to a JDBC TLOG store.

- Only one JDBC TLOG store can be configured per WebLogic Server. Conversely, multiple WebLogic Servers can not share a JDBC TLOG store.

- You must configure a JDBC TLOG store. The default is to persist TLOG information to the server's default persistent store.

- You cannot use a data source that is configured to use an XA JDBC driver or is configured to support global transactions. Use a non-XA data source.

- For general rules on JDBC-accessible stores, see Guidelines for Configuring a JDBC Store.

Additional Considerations

The following section provides additional information on JDBC TLOG store behavior and limitations:

- The database used to store the TLOG information must be available at server startup. If the database is not available, the WebLogic Server instance will fail to boot.

- Only the JTA sub-system can use the JDBC TLOG store to persist information about committed transactions coordinated by the server that may not have been completed. No other systems can access the JDBC TLOG store.

- Using a JDBC TLOG store does not change LLR behavior. A JDBC TLOG store can be used with or without LLR. When used in tandem with LLR transactions, the transaction committing information is stored in a LLR table but the checkpoint records and heuristic logs are stored in the JDBC TLOG store.

- If the TLOG store is changed from one store type to another or from one location to another, the change takes effect only after reboot and all pending transactions in the old store are not be copied to the new store. You must ensure there are no pending transactions before changing the TLOG store type or location.

- If the JDBC TLOG store becomes unavailable, the JTA health state transitions to FAILED and any global transactions will fail. In turn, the server life-cycle changes to FAILED. The JTA Transaction Recovery System then attempts to recover from transient runtime errors if possible and resolves any in-doubt transactions. See Server Migration when using a JDBC TLOG Store.

- If the database used to store TLOG is corrupted and can not be restored, than all pending transaction information is lost.

- If database tables or rows used by the JDBC TLOG store are locked for some reason in the database, the database administrator must resolve these locks manually. Otherwise, the JTA subsystem is blocked and will be suspended until the lock(s) are released, or encounters an exception due to lock. The JTA subsystem will remain unable to operate correctly until the lock(s) are released or the value of MaxRetrySecondsBeforeTLOGFail is exceeded.

Note:
Different databases have different features for locked local transactions. Some databases may have trouble resolving database locks in a timely manner. You may need to contact your database administrator for more information on basic row locking issues that may occur in your application environment.

Server Migration when using a JDBC TLOG Store

WebLogic Server supports both manual and automatic migration of the Transaction Recovery Service when using a JDBC TLOG store. The data source used by the JDBC TLOG store must be targeted on both the primary server instance and a backup server instance. Oracle recommends targeting the data source to all the server instances of a cluster. For more information, see "Transaction Recovery After a Server Fails" in Developing JTA Applications for Oracle WebLogic Server.

Monitoring a JDBC TLOG Store

You can monitor statistics for Transaction Log Store statistics and for each open store connection. For general information on how to monitor persistent stores, see Monitoring the WebLogic Persistent Store.

How to Monitor the JDBC TLOG Store Health State

When you configure WebLogic Server to use a JDBC TLOG store, the store is registered with the Health system as a non-critical subsystem using a name with the following pattern:

PersistentStore.TLOG_servername

where servername is the name of the WebLogic Server instance hosting the primary TLOG store.

You can monitor the JDBC TLOG store health state in the WebLogic Server Administration Console, see "Monitor server health" in Oracle WebLogic Server Administration Console Online Help.

How to Monitor Transaction Log Store Statistics

You can monitor Transaction Log Store statistics in the WebLogic Server Administration Console, see "View transaction log statistics for a server" in Oracle WebLogic Server Administration Console Online Help.

How to Monitor Transaction Log Store Connections

You can monitor Transaction Log Store connection statistics in the WebLogic Server Administration Console, see "View statistics for TLOG store connections" in Oracle WebLogic Server Administration Console Online Help.

Security Considerations

Properly secure your application environment, including the JDBC TLOG store table. Failure to do so may allow a process to:

- Delete information, maliciously or unintentionally. Such a deletion can cause transaction information to be lost and cause affected global transactions to be completed heuristically.

- Modify information, maliciously or unintentionally. Such modification can cause unexpected behavior.

- Read confidential transaction information, such as when transaction starts and what resources are involved.

- Access the database instance or database machine.

- Access the network between JTA and the database, potentially intercepting, viewing, or modifying data.

See Chapter 7, "Secure File Store Data."

Using a JDBC Store

The following sections provide an example of a JDBC store, and information about creating a database table for a JDBC store, either using an existing DDL, a custom DDL, and using Oracle blob record columns in a DDL file.

To create a JDBC store, you can directly modify the default JDBCStoreMBean parameters. For instructions on using the WebLogic Server Administration Console to create a JDBC store, see "Create JDBC Stores" in the Oracle WebLogic Server Administration Console Online Help.

For configuration guidelines on using prefixes with JDBC stores and recommended JDBC data source settings, see Guidelines for Configuring a JDBC Store.

Main Steps for Configuring a JDBC Store

The main steps for creating a JDBC store are as follows:

1. Create a JDBC data source or multi data source to interface with the JDBC store.

2. Create a JDBC store and associate it with the JDBC data source or multi data source.

3. It is highly recommended that you configure the Prefix option to a unique value for each configured JDBC store table.

4. Associate the JDBC store with the subsystem(s) that will be using it, such as:

- For JMS servers, select the JDBC store on the General Configuration page.

- For Store-and-Forward agents, select the JDBC store on the General Configuration page.

- For a Path Service, select the custom file store on the General Configuration page.

Example of a JDBC Store

Here's an example of how a JDBC store may look in the configuration file, using the JDBC data source MyDataSource, and with a logical name specified:

<jdbc-store>
<name>SampleJDBCStore</name>
<target>yourserver</target>
<data-source>MyDataSource</data-source>
<logical-name>Baz</logical-name>
</jdbc-store>

Table 6-2 describes the JDBC store configuration parameters that can be modified.

Table 6-2 JDBC Store Configuration Options

Option

Required

What It Does

Name

Yes

The name of the JDBC store, which must be unique across all stores in the domain.

Targets

Yes

The server instance, cluster, or migratable target where a JDBC store is targeted. Multiple subsystems can share the same JDBC store, as long as they are all targeted to the same server instance or migratable target.

Note:

- When using a cluster to host a JMS Server, you must target the JDBC store to the same cluster used by the JMS Server. See "Configuring Dynamic Clustered JMS" in Administering JMS Resources for Oracle WebLogic Server.

- When using migratable targets for JMS services, you must target the JDBC store to the same migratable target used by the JMS service. See "Service Migration" in Administering Clusters for Oracle WebLogic Server.

Data Source

Yes

The JDBC data source or multi data source used by this JDBC store to access the store's database table (WLStore). This data source or multi data source must be targeted to the same target as the JDBC store.

Note: The JDBC store must use a JDBC data source that uses a non-XA JDBC driver and has Supports Global Transactions disabled. This limitation does not remove the XA capabilities of layered subsystems that use JDBC stores. For example, WebLogic JMS is fully XA-capable regardless of whether it uses a file store or any JDBC store.

Prefix Name

No

The prefix for the JDBC store's table is generally entered in the following format: [[[catalog.]schema.]prefix]

When using multiple JDBC stores, it is required to set this option to a unique value for each configured JDBC store. When no prefix is specified, the JDBC store table name is simply WLStore and the database implicitly determines the schema according the current user of the JDBC connection. Also, two JDBC stores cannot share the same database table. For more information, see Using Prefixes with a JDBC Store.

Modifying an existing JDBC store's prefix does not necessarily require a server restart, as described in Modifying Custom Persistent Store Parameters.

Logical Name

No

Optionally used with WebLogic Server subsystems, like EJBs, when deploying a module to an entire cluster, but also require a different physical store on each server instance in the cluster. In such a configuration, each physical store would have its own name, but all the persistent stores would share the same logical name.

Create Table from DDL File

No

Optionally used with supported DDL (data definition language) files to create the JDBC store's database table (WLStore). This option is ignored when the JDBC store's database table already exists. For more information, see Creating a JDBC Store Table Using Default and Custom DDL Files.

For instructions on configuring a JDBC store using the WebLogic Server Administration Console, see "Create JDBC Stores" in the Oracle WebLogic Server Administration Console Online Help.]

Supported JDBC Drivers

When using a JDBC store, the backing database can be any database that is accessible through a JDBC driver. WebLogic Server detects some drivers for supported databases.

For each of these databases, there are corresponding DDL (data definition language) files within the ORACLE_HOME\wlserver\modules\com.bea.core.store.jdbc_1.0.0.0.jar file, in the weblogic/store/io/jdbc/ddl directory, where ORACLE_HOME is the top-level installation directory of your WebLogic Server installation.

Table 6-3 Supported JDBC Drivers and Corresponding DDL Files

Database

DDL Files

IBM DB2

db2.ddl
db2v6.ddl

Informix

informix.ddl

Microsoft SQL (MSSQL) Server

mssql.ddl

MySQL

mysql.ddl

Oracle

oracle.ddl
oracle_blob.ddl
oracle_blob_securefile.ddl

Sybase

sysbase.ddl

The DDL files are actually text files containing the SQL commands (terminated by semicolons) that create the JDBC store's database table (WLStore). Therefore, if you are using a database that is not included in this list, you can copy and edit any one of the existing DDL files to suit your specific database, as described in Creating a JDBC Store Table Using a Custom DDL File.

Creating a JDBC Store Table Using Default and Custom DDL Files

The JDBC Store Configuration page provides an optional Create Table from DDL File option, through which you can access a pre-configured DDL file that is used to create the JDBC store's backing table (WLStore). This option is ignored when the JDBC store's backing table already exists. It is mainly used to specify a custom DDL file created for an unsupported database, or when upgrading JMS JDBC store tables from a prior release to a current JDBC Store table.

If a DDL file name is not specified in the Create Table from DDL File field, and the JDBC store detects that its backing table does not already exist, the JDBC store automatically creates the table by executing a pre-configured DDL file that is specific to the database vendor (see Supported JDBC Drivers).

If a DDL file name is specified in the Create Table from DDL File field, and the JDBC store detects that its backing table does not already exist, the JDBC store searches for the specified DDL file in the file path first, and then, if not found, searches for the DDL file in the CLASSPATH. Once found, the SQL within the DDL file is executed to create the JDBC store's backing table. If the configured file is not found and the table doesn't already exist, the JDBC store will fail to boot.

Creating a JDBC Store Table Using a Custom DDL File

To use a different database from those listed in Supported JDBC Drivers, you can copy and edit any one of the existing DDL template files to suit your specific database.

1. Use the JAR utility supplied with the JDK to extract the DDL files to the /weblogic/store/io/jdbc/ddl directory using the following command:

jar xf com.bea.core.store.jdbc_1.0.0.0.jar /weblogic/store/io/jdbc/ddl

Note:
If you omit the weblogic/store/io/jdbc/ddl parameter, the entire jar file is extracted.

2. Edit the DDL file for your database. An SQL command can span several lines and is terminated with a semicolon (;). Lines beginning with pound signs (#) are comments.

3. Save your changes and rename the new DDL appropriately (for example, mydatabase.ddl)

4. Create a JDBC store, as explained in "Create JDBC Stores" in the Oracle WebLogic Server Administration Console Online Help.

5. Use the Create Table from DDL File option on the General Configuration page to specify your custom DDL file (for example, /mydatabase.ddl).

Note:
On Windows systems, for full path names always include the drive letter.

Enabling Oracle BLOB Record Columns

For Oracle databases, you can use the oracle_blob.ddl or oracle_blob_securefile.ddl file to create a JDBC store table with a BLOB record column type rather than the default LONG RAW record column type. The oracle_blob.ddl is used to create Oracle basic file BLOBs and the oracle_blob_securefile.ddl file is used to create Oracle secure file BLOBs. Both files types are pre-configured and supplied in the WebLogic CLASSPATH, as described in Supported JDBC Drivers.

Oracle Database 11g Release 2 includes a zero copy I/O performance enhancement for Secure Files and a logical cache for BLOBs. Use of these enhancements can improve throughput with a JDBC store when message sizes are large and when network connections to the database are slow. The Oracle LONG RAW datatype is typically better performing than BLOBS when using a fast connection to the database.

Note:
If you need to preserve data already in a Oracle LONG RAW column, but still want to switch the column to BLOB, do not use this method. Instead, consult the Oracle documentation for the SQL ALTER TABLE command.

To use the Oracle BLOB DDL with a JDBC store:

1. Shut down the server instance that uses the JDBC store.

2. Delete the current JDBC table, as explained in Managing JDBC Store Tables.

3. Reboot the server instance.

4. Create a new JDBC store, as explained in "Create JDBC Stores" in the Oracle WebLogic Server Administration Console Online Help.

5. In the Create Table from DDL File field on the General Configuration page, enter the location of:

- the oracle_blob.ddl file as: /oracle_blob.ddl

- the oracle_blob_securefile.ddl file as: /oracle_blob_securefile.ddl

6. Click Finish to create the JDBC store's backing table.

When using Oracle BLOBS, you may be able to improve performance by tuning the ThreeStepThreshold value.

When the JDBC store schema contains an Oracle BLOB column (basic file or secure file), the JDBC store populates the BLOB data using one of the following implementations based on the size of the BLOB data:

- The JDBC store inserts a row with BLOB data directly into the store table in a single step. Because only a single step is involved, JDBC batch insert is also adopted and performs best when the data size is small. This implementation is used when the BLOB data to be inserted is less than or equal to the value of the ThreeStepThreshold.

- The JDBC store inserts a row with BLOB data into the store table in three steps using the Oracle LOB API. This implementation provides better performance when the data size is large. This implementation is used when the BLOB data to be inserted is greater than the value of the ThreeStepThreshold.

The default value of ThreeStepThreshold is 200K.

Managing JDBC Store Tables

The JDBC utils.Schema utility allows you to regenerate a new JDBC store database table (WLStore) by deleting the existing version. Running this utility is usually not necessary, since WebLogic Server automatically creates this table for you. However, if your existing JDBC store database table somehow becomes corrupted, you can delete it using the utils.Schema utility.

The utils.Schema utility is a Java program that takes command-line arguments to specify the following:

- JDBC driver

- Database connection information

- Name of a file containing the SQL Data Definition Language (DDL) commands that create the database table

Using the utils.Schema Utility to Delete a JDBC Store Table

Enter the utils.Schema command, as follows:

$ java utils.Schema url JDBC_driver [options] DDL_file

Note:
To execute utils.Schema, your CLASSPATH must contain the weblogic.jar file.

Table 6-4 lists the utils.Schema command-line arguments.

Table 6-4 Command-line arguments for utils.Schema

Argument

Description

url

Database connection URL. This value must be a colon-separated URL as defined by the JDBC specification.

JDBC_driver

Full package name of the JDBC Driver class.

options

Optional command options.

If required by the database, you can specify:

- The user name and password as follows:

-u <username> -p <password>

- The Domain Name Server (DNS) name of the JDBC database server as follows:

-s <dbserver>

You can also specify the -verbose option, which causes utils.Schema to echo SQL commands as they are executed.

DDL_file

The full pathname of the DDL text file containing the SQL commands that you want to execute. For more information, see Supported JDBC Drivers.

For example, the following command deletes a JDBC table named MYWLStore in an Oracle server named DEMO, with the user name user1 and password foobar:

$ echo "drop MYWLStore;" > drop.ddl

$ java utils.Schema
jdbc:weblogic:oracle:DEMO \
weblogic.jdbc.oci.Driver -u user1 -p foobar -verbose \
drop.ddl

Guidelines for Configuring a JDBC Store

The following sections provide guidelines for using JDBC store prefixes, recommended WebLogic JDBC data source settings for JDBC stores, and handling JMS transactions with JDBC stores.

Using Prefixes with a JDBC Store

The JDBC store database contains a database table, named WLStore, that is generated automatically and is used internally by WebLogic Server. The JDBC store provides an optional Prefix Name parameter, which can be used to provide more precise access to the database table.

It is always a best practice to configure a prefix for the JDBC WLStore table name, especially when:

- The database requires fully-qualified names. (You should verify this with your database administrator.)

- There is more than one JDBC store instance sharing a database, since no two JDBC stores can share the same table.

- There are many tables in the database. Setting the prefix reduces the number of tables the JDBC store must search through to find its table during boot.

JDBC Store Table Rules

To avoid potential data loss, follow these rules:

- Each JDBC store table name must be unique.

- If multiple JDBC stores share a table, the behavior is undefined and data loss is likely.

- There is no procedure for combining two database tables into a single table.

Prefix Name Format Guidelines

For most databases, the Prefix Name option for the JDBC store's backing database table should be set in the following format for each configured JDBC store, which will result in a valid table name when prepended to the JDBC store table name:

[[[catalog.]schema.]prefix]

Note that each period in the [[[catalog.]schema.]prefix] format is significant. Generally, catalog identifies the set of system tables being referenced by the DBMS, and schema generally corresponds to ID of the table owner (username). When no prefix is specified, the JDBC store table name is simply WLStore and the database implicitly determines the schema according the current user of the JDBC connection.

For example, in a production database, the database administrator could maintain a unique table for the Sales department, as follows:

[[[Production.]JMSAdmin.]Sales]

The resulting table will be created in the Production catalog, under the JMSAdmin schema, and will be named SalesWLStore.

For some DBMS vendors, such as Oracle, there is no catalog to set or choose, so the format simplifies to [[schema.]prefix]. For more information, refer to your DBMS documentation for instructions on fully-qualified table names, but note that the syntax specified by the DBMS may differ from the format required for this option.

Caution:
If the Prefix Name setting is changed, but the WLStore database table already exists in the database, take care to preserve existing table data. In this case, the existing database table must be renamed by a database administrator to match the new configured table name.

Recommended JDBC Data Source Settings for JDBC Stores

The following settings are recommended when you use a JDBC data source or multi data source for JDBC stores.

Automatic Reconnection to Failed Databases

WebLogic Server provides robust JDBC data sources that can automatically reconnect to failed databases after they come back online, without requiring you to restart WebLogic Server. To take advantage of this capability, and make your use of JDBC stores more robust, configure the following options on the JDBC data source associated with the JDBC store:

TestConnectionsOnReserve="true"
TestTableName="SYSTABLES"
ConnectionCreationRetryFrequencySeconds="600"

For more information about JDBC default Test Table Names, see "Connection Testing Options for a Data Source" in the Administering JDBC Data Sources for Oracle WebLogic Server. For more information about setting the number of database reconnection attempts, see the "Enabling Connection Creation Retries" section in Administering JDBC Data Sources for Oracle WebLogic Server.

Required Setting for Oracle DB2 Type 4 JDBC Drivers

For data sources used as a JDBC store that use the Oracle Type 4 JDBC driver for DB2, the BatchPerformanceWorkaround property must be set to "true" due to internal JMS batching requirements.

Handling JMS Transactions with JDBC Stores

The JDBC store must use a JDBC data source that uses a non-XA JDBC driver and has Supports Global Transactions disabled. This limitation does not remove the XA capabilities of layered subsystems that use JDBC stores. For example, WebLogic JMS is fully XA-capable regardless of whether it uses a file store or any JDBC store.

Because the JDBC store implements the XAResource interface, it acts as it's own resource manager and handles the transactions above the JDBC driver level. That is, the store itself implements the XAResource and handles the transactions without depending on the database (even when the messages are stored in the database).

This means that whenever you are using a JDBC store and a database (even if it is the same database where the JMS messages are stored), then it is two-phase commit transaction.

For more information about using JMS transactions with a JDBC store, see "Using Transactions with WebLogic JMS" in Developing JMS Applications for Oracle WebLogic Server.

From a performance perspective, you may also boost your performance as follows:

- Ensure that the JDBC data source used for the database work exists on the same server instance as the JMS destination—the transaction will still be two-phase, but it will be handled with less network overhead.

- Use file stores rather than JDBC stores.

- Configure multiple services to share the same store if they will commonly be invoked within the same transaction.

- If an application directly performs database operations in addition to invoking store services (such as JMS) within the same transaction, consider using a JDBC data source with Logging Last Resource (LLR) enabled for the database operations.
With the LLR optimization, the transaction will follow the two-phase commit protocol, but the database operations will be handled in a single local transaction, which may improve overall transaction performance. For more information on using the LLR optimization, see "Understanding the Logging Last Resource Transaction Option" in Administering JDBC Data Sources for Oracle WebLogic Server.

Enabling I/O Multithreading for JDBC Stores

Under heavy JDBC store I/O loads, you can improve performance by configuring a JDBC store to use multiple JDBC connections to concurrently process I/O operations.

Note:
Enabling I/O multithreading under light loads may actually reduce performance. Oracle recommends that you tune your applications appropriately.

To enable I/O multithreading, set the Worker Count attribute to an integer value greater than 1. The default value of this configuration property is 1 and disables this option. The Worker Count attribute specifies the number of worker threads the JDBC store uses to process store I/O. Each worker thread acquires one JDBC connection from the configured data source pool when the store is opened. In many cases, benefits of multithreading tends to decrease after 4 concurrent threads. When using a slow connection to the database, multithreading may not improve performance.

Note:
If you set the Worker Count to a value where there are not enough connections available in the connection pool, the JDBC store will fail to open.

You can tune the workload for each worker thread by changing the value of the Worker Preferred Batch Size attribute. Increasing the value of this attribute incrementally increases the workload assigned to each worker thread. The workload consists of store I/O requests, which are grouped and pushed to each JDBC worker thread for processing. If the size of individual I/O requests is commonly very large (for example, requests to store 1 MB JMS messages), then tune the value of Worker Preferred Batch Size to a smaller value for better performance.

Rebuilding the Store Table Index for an Oracle Database

When I/O multithreading is enabled, multiple JDBC connections are used to concurrently process store I/O operations which can result in database resource contention. To reduce contention on Oracle databases, Oracle recommends rebuilding the primary key index into a reverse key index when I/O multithreading is used. If you use and then disable I/O multithreading, Oracle recommends rebuilding the primary key index as a non-reverse index. For more information on reverse key indexes, see "Indexes and Index-Organized Tables" in Oracle Database Concepts.

Use the following basic steps to rebuild the Store table index for Oracle database:

1. Login to the Oracle database under the Store schema name. The Store schema name may or may not be the same as the data source user name.

2. Use the PL/SQL script found in Build a Reverse Index for an Oracle Database or Build a Non-Reverse Index for an Oracle Database to rebuild the Store table index as needed. Replace <Store Table Name> in each script with the Store table name as described in Using Prefixes with a JDBC Store. For more information on PL/SQL, see "Execution of PL/SQL Subprograms" in Oracle Database Concepts.

Note:
Oracle recommends reverse indexes for I/O multithreading and non-reverse indexes for single threaded I/O.

Build a Reverse Index for an Oracle Database

To rebuild the Store table index as a reverse index for an Oracle database, run the following PL/SQL block as the store database user:

declare
idx           user_ind_columns.index_name%TYPE;
alter_stmt    VARCHAR2(200);
begin
select index_name into idx from user_ind_columns where table_name =
<Store Table Name> and column_name = 'ID';
alter_stmt := 'alter index ' || idx || ' rebuild reverse';
dbms_output.put_line(alter_stmt);
execute immediate alter_stmt;
end;
/

Build a Non-Reverse Index for an Oracle Database

To rebuild a reverse Store table index as a non-reverse index for Oracle database, run the following PL/SQL block as the store database user:

declare
idx           user_ind_columns.index_name%TYPE;
alter_stmt    VARCHAR2(200);
begin
select index_name into idx from user_ind_columns where table_name =
<Store Table Name> and column_name = 'ID';
alter_stmt := 'alter index ' || idx || ' rebuild noreverse';
dbms_output.put_line(alter_stmt);
execute immediate alter_stmt;
end;
/

Reducing Contention in a Non-Oracle Database

For non-Oracle databases, refer to the database provider's documentation on how to reduce the contention.

7 Managing the WebLogic Persistent Store

This chapter explains how to use the administration utility and secure store data.

- Administering a Persistent Store

- Secure File Store Data

Administering a Persistent Store

The WebLogic Store administration utility enables administrators to troubleshoot a WebLogic persistent store. The store utility operates only on a store that is not currently opened by a running server instance. This utility can be run from a Java command line or from WebLogic Scripting Tool (WLST), as described in Store Administration Using a Java Command Line and Store Administration Using WLST.

The most common uses-cases for store administration are for compacting a file store to reduce its size and for dumping the contents of a file store of JDBC store to an XML file for troubleshooting purposes. Examples of these use cases are provided later in this section.

Table 7-1 defines the available store administration commands for Java and WLST.

Table 7-1 Persistent Store Administration Options

Java Command

WLST Method

What It Does

help

helpstore

Displays available commands, usage, and examples.

compact

compactstore

Compacts and defragments the space occupied by a file store. This command only works offline and does not work for JDBC stores.

Note: Compacting a file store is usually not necessary if you know that file store will likely grow to the current size again. File stores automatically re-use space freed by deleted records and expand only when there is insufficient internal space for new records. Also, file stores do not normally become fragmented as most persistent records are short-lived.

openfile

openfilestore

Opens an existing file store for further operations. If a file store does not exist, a new one is created in an open state using the -create parameter.

openjdbc

openjdbcstore

Opens an existing JDBC store for further operations. If a JDBC store does not exist, a new one is created in an open state

dump

dumpstore

Dumps store or connection contents in a human-readable format to user-specified XML file. The XML file format is the same format used by the diagnostic image of the persistent store.

list

liststore

Lists store names, open stores, or connections in a store.

n/a

getstoreconns

Returns a list of connections in the specified store (for script access)

n/a

getopenstores

Returns a list of opened stores (for script access).

opts

n/a

Lists invocation options for the store administration tool.

verbose

n/a

Controls display of additional information, such as stack traces.

close

closestore

Closes a previously opened store.

quit

exit

Ends the store administration session.

A persistent store can be backed by the file system (file store) or by a JDBC-capable database (JDBC store). Except for the openfile/openfilestore() and openjdbc/openjdbcstore() options, there is no difference in the options to operate on these two different types of stores.

Most commands and methods work in terms of store names, while others also work in terms of connection names. Store connections are logical groups of records within persistent stores. For example, the JMS and JTA subsystems persist their respective records in different connections in the same file store.

Store Administration Using a Java Command Line

To open the persistent store administration utility from a Java command line, type the following:

> java weblogic.store.Admin
> storeadmin->

Accessing Store Administration Help

Type help for detailed descriptions on available store administration commands, as well as examples of typical command usage. For example, the following comprehensive help is provided for the list command, which lists store names, open stores, or connections in a store.

storeadmin->help list
Command:
list
Description:
lists store names, open stores, or connections in a store
Usage:
list [-store storename|-dir dir]
Examples:
list #lists all opened stores by storename
list -store store1 #lists all connections in store1
list -dir dir1 #lists all storenames found in dir1

Dumping the Contents of a File Store

Here's an example of using a series of store administration commands to ultimately export the contents of a file store named myfilestore into a human-readable XML file format in a temporary directory. This does not include store connection names or the actual record contents, which require the optional -conn and -deep parameters.

> storeadmin-> list -dir .
> storeadmin-> openfile -store myfilestore -dir .
> storeadmin-> dump -store myfilestore -out d:\tmp\filestore1-out
> storeadmin-> close -store myfilestore

The list command shows all the store names in the current directory. The openfile and openjdbc commands must be used to open and/or create a file or JDBC store first before calling certain administration functions, like dump and list (only when listing open stores). After administering an open store, you must close it using the close command.

Compacting a File Store

Here is an example of using the compact command to compact the space occupied by a file store in the mystores directory.

> storeadmin->compact -dir c:\mystores -tempdir c:\tmp

Since the compact command can only be used on an unopened file store, none of the stores that have files in the source -dir directory should be open. Also, the temporary -tempdir directory should have at least enough extra space as the source directory and should also not be under the source directory. When compact successfully completes, the newly compacted store files will be in the mystores directory. In addition, a new, uniquely-named directory will be created under tmp containing the original uncompacted store files.

Store Administration Using WLST

The WLST interface has additional methods (compared to the Java command line) such as getopenstores and getstoreconns, that return relevant Java objects and can be used for scripting in WLST.

Note:
In this release, ThreeStepThreshold, Worker Count, and Worker Preferred Batch Size are not supported when using the WebLogic Scripting Tool (WLST) offline.

Accessing Store Administration Help

To access the persistent store administration utility from WLST, type the following command:

> java weblogic.WLST

Type helpstore() for detailed descriptions on available store administration commands, as well as examples of typical command usage. For example, the following help is provided for the list command, which lists store names, open stores, or connections in a store.

> wls:/offline> helpstore(liststore)
lists storenames, opened stores, or connections (for interactive access)
Parameters store and dir cannot both be specified concurrently.

Usage: liststore(store='null',dir='null')

@param store [optional] a previously opened JDBC or File store's name.
If store is specified, all connections in the store are listed.
@param dir [optional] directory for which to list available store names
If dir is specified, all store names in the directory are listed.

If neither store nor dir are specified, all open store names are listed.
@return 1 on success, 0 on failure

Note that the parameters with an equal sign "=" are optional. For example, the compactstore method can be invoked as either compactstore(dir='storename', tempdir='/tmp') or compactstore(store='storename'), where tempdir takes the default value. Default values for optional parameters are listed in the command-specific help.

Dumping the Contents of a JDBC Store Using WLST

Here is an example of using the dumpstore method (store, outfile, conn='null', deep='false') to export the contents of a JDBC store named myJDBCStore in a human-readable XML file format out to a file named mystoredump-out.xml. This does not include store connection names or the actual record contents, which require the optional conn and deep parameters.

> wls:/offline>
openjdbcstore('myJDBCStore', 'oracle.jdbc.OracleDriver',
'jdbc:oracle:thin:@test2k31:1521:test120a', './wlstoreadmin-dump.props',
'jmstest', 'jmstest', '', 'jdbcstoreprefix')
dumpstore('myJDBCStore', 'mystoredump-out')
closestore('myJDBCStore')

The openjdbcstore and openfilestore methods must be used to open and/or create a store first before calling certain administration functions, like dumpstore and liststore (only when listing open stores). After administering an open store, you must close it using the closestore method.

Compacting a File Store Using WLST

Here is an example of a WLST script that uses the compactstore method (dir,tempdir='null') to compact the space occupied by a file store files in the mystores directory.

> wls:/offline> compactstore('c:\mystores','c:\tmpmystore.dir')

Since the compactstore() method can only be used on unopened file stores, none of the stores that have files in the source 'dir' directory should be open. Also, the temporary 'tempdir' directory should have at least enough extra space as the source directory and should also not be under the source directory. When compact successfully completes, the newly compacted store files will be in the mystores directory. In addition, a new, uniquely-named directory will be created under tmpmystore containing the original uncompacted store files.

Secure File Store Data

In order to properly secure file store data, you must set appropriate directory permissions on all your file store directories. If you require data encryption, you must use appropriate third-party encryption software.

8 Monitoring the WebLogic Persistent Store

This chapter explains how to monitor the WebLogic Server persistent store.

- Monitoring a Persistent Store

- Monitoring Stores

- Monitoring Store Connections

Monitoring a Persistent Store

You can monitor statistics for each existing persistent store and for each open store connection.

Monitoring Stores

Each persistent store is represented at run time by an instance of the PersistentStoreRuntimeMBean, which provides the following options.

Table 8-1 Persistent Store Run-time Options

Option

What It Does

CreateCount

Number of create requests issued to this persistent store.

ReadCount

Number of read requests issued to this persistent store.

UpdateCount

Number of update requests issued by this persistent store.

DeleteCount

Number of delete requests issued by this persistent store.

ObjectCount

Number of objects contained in the persistent store.

Connections

Number of active connections in the persistent store.

PhysicalWriteCount

Number of times the persistent store flushes its data to durable storage.

Monitoring Store Connections

For each open persistent store connection, the persistent store also registers a PersistentStoreConnectionRuntimemMBean, which provides the following options.

Table 8-2 Persistent Store Connection Runtime Options

Option

What It Does

CreateCount

Number of create requests issued to this connection.

ReadCount

Number of read requests issued to this connection.

UpdateCount

Number of update requests issued by this connection.

DeleteCount

Number of delete requests issued by this connection.

ObjectCount

Number of objects contained in the connection.

Table 8-3 defines most of the run-time prefix names of the WebLogic services and subsystems that can create a connection to the persistent store.

Table 8-3 Persistent Store Run-Time Prefix Names

Subsystem/Service

Run-Time Prefix Name

Deployment

weblogic.deploy.internal

where internal is the name of the deployment connection

Diagnostic Service

weblogic.diagnostics.internal

where internal is the logical name of the diagnostic archive connection

EJB Timer Services

weblogic.ejb.timer.internal

where internal uniquely identifies EJB deployments in a server instance

JMS Service

JMS server:

weblogic.messaging.jmsServer.internal

where internal is the name of the JMS server connection

JMS durable subscriber:

weblogic.messaging.jmsServer.durablesubs.internal

where internal is the name of the durable subscriber connection

JTA Transaction Log (TLOG)

weblogic.transaction.internal

where internal is the name of the TLOG connection

Path Service

weblogic.messaging.PathService.internal

where internal is the name of the path service connection

SAF Service

SAF agent

weblogic.messaging.SAFAgent@server1.internal

where internal is the name of the SAF agent's connection

SAF durable subscriber:

weblogic.messaging.SAFAgent@server1.durablesubs.internal

where internal is the name of the durable subscriber connection

Web Services

weblogic.wsee.server.store.internal

where internal is the name of the Web Service's connection

Oracle Legal Notices

Copyright Notice

Copyright © 1994-2015, Oracle and/or its affiliates. All rights reserved.

Trademark Notice

Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.

Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.

License Restrictions Warranty/Consequential Damages Disclaimer

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.

Warranty Disclaimer

The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

Restricted Rights Notice

If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs, including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.

Hazardous Applications Notice

This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.

Third-Party Content, Products, and Services Disclaimer

This software or hardware and documentation may provide access to or information on content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services.

Alpha and Beta Draft Documentation Notice

If this document is in preproduction status:

This documentation is in preproduction status and is intended for demonstration and preliminary use only. It may not be specific to the hardware on which you are using the software. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to this documentation and will not be responsible for any loss, costs, or damages incurred due to the use of this documentation.